Yayınlar & Eserler

Yayın Ağı
Makaleler 12
Tümü (12)
SCI-E, SSCI, AHCI (8)
SCI-E, SSCI, AHCI, ESCI (8)
Scopus (9)
TRDizin (1)
Diğer Yayınlar (2)

1. Wear-Mode-Dependent Tribological Performance of Glass Fiber-Reinforced Epoxy Composites Modified With Graphene Nanoplatelets

Gültürk E., Ak R., Angin T. F.
POLYMER COMPOSITES , cilt.47, sa.14, ss.12416-12427, 2026 (SCI-Expanded, Scopus)

2. Mechanism Based Evaluation of Scratch Damage in Diatom Frustule Reinforced Epoxy Composites

Gültürk E., Yıldırım S. T.
POLYMER COMPOSITES , 2026 (SCI-Expanded, Scopus)

3. Solid Particle Erosion and Predictive Modeling of Epoxy Composites Reinforced With Diatom Frustules

Gültürk E., Yarar E., Korkusuz O. B., Kara A., Sınmazçelik T.
POLYMER COMPOSITES , cilt.47, sa.8, ss.7094-7108, 2026 (SCI-Expanded, Scopus)

4. Enhanced Wear Resistance of Epoxy Composites through the Incorporation of Diatom Frustules: A Multi-Objective Optimization Approach

Gültürk E., Aydın L., Şahin A. E., Sınmazçelik T., Güden M.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.51, sa.7, ss.9431-9451, 2026 (SCI-Expanded, Scopus)

5. Effect of filling materials on the tribological performance of polytetrafluoroethylene in different wear modes

Fidan S., Korkusuz O. B., Özzaim Toker P., Gültürk E., Ateş B. H., Sınmazçelik T.
POLYMER COMPOSITES , cilt.45, sa.15, ss.13561-13577, 2024 (SCI-Expanded, Scopus)

6. A modified approach on modeling-design-optimization procedure for cutting of pure titanium using wire electric discharge machining (WEDM)

Baytok Y., Aydin L., DEVECİ H. A., GÜLTÜRK E.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , cilt.238, sa.5, ss.2305-2319, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

7. A Novel Approach to Improve Tensile Strength of Al/Mg Hybrid Friction Stir welding Joint by Stochastic Optimization

Aydın O., Gültürk E.
Journal of Artificial Intelligence and Data Science , cilt.2, sa.1, ss.31-42, 2022 (Hakemli Dergi)

8. Modeling and Optimum Parameters of CO2 Laser MIG Hybrid Welding Process

Türkoğlu R., Aydın L., Gültürk E.
The International Journal of Materials and Engineering Technology , cilt.4, sa.2, ss.91-100, 2021 (Hakemli Dergi)

9. Calcined and natural frustules filled epoxy matrices: The effect of volume fraction on the tensile and compression behavior

GÜLTÜRK E., Guden M., Tasdemirci A.
COMPOSITES PART B-ENGINEERING , cilt.44, sa.1, ss.491-500, 2013 (SCI-Expanded, Scopus)

10. Diyatomitlerin Polimer Kompozitlerde Kullanımı ve Diyatomit Katkılı Epoksi Kompozitlerin Termal Özellikleri

Gültürk E., Güden M.
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.13, sa.3, ss.13-21, 2011 (TRDizin)

11. Thermal and acid treatment of diatom frustules

Gültürk E.
Journal of Achievements in Materials and Manufacturing Engineering , cilt.46, sa.2, ss.196-203, 2011 (Scopus)

12. Diatom frustule-filled epoxy: Experimental and numerical study of the quasi-static and high strain rate compression behavior

Tasdemirci A., Yuksel S., Karsu D., Gulturk E., Hall I. W., Guden M.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.480, sa.1-2, ss.373-382, 2008 (SCI-Expanded)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 12

1. A Parametric Study of the Scratch Behavior of Glass Fiber Reinforced Polyamide 66

Özzaim Toker P., Korkusuz O. B., Gültürk E., Sınmazçelik T.
2nd International Canadian Scientific Research Congress, Toronto, Kanada, 24 - 25 Ekim 2024, ss.550-556, (Tam Metin Bildiri)

2. Investigation of the Sliding Wear Performance Of Glass Fiber Reinforced Polyamide 66 Under Different Conditions

Korkusuz O. B., Özzaim Toker P., Gültürk E., Sınmazçelik T.
2nd International Canadian Scientific Research Congress, Toronto, Kanada, 24 - 25 Ekim 2024, ss.557-564, (Tam Metin Bildiri)

3. The Effect of Crane Design on Stress Distribution for the Bridge Crane

Mercan S., Çimen M. Ş., Gültürk E.
the International Congress on Advances in Welding Science and Technology for Construction Energy and Transportation Systems AWST-2011, Antalya, Türkiye, 24 - 25 Ekim 2011, ss.279-286, (Tam Metin Bildiri)

4. ARAÇ FAR VE ARKA STOP AYDINLATMA ÜRÜNLERİNİN ENDÜSTRİYEL ROBOT YARDIMI İLE OTOMATİK ÖLÇÜM SİSTEM ENTEGRASYONU

Gültürk E., Aktürk K.
12. ULUSLARARASI MÜHENDİSLİK MİMARLIK VE TASARIM KONGRESİ, İstanbul, Türkiye, 23 - 25 Aralık 2023, ss.25-33, (Tam Metin Bildiri)

5. Optimization of Process Parameters for Minimizing Surface Roughness in Abrasive Water Jet Machining

Dalkılıç Ö. F., Aydın L., Gültürk E.
International Cappadocia Scientific Research Congress, Nevşehir, Türkiye, 15 - 17 Aralık 2021, ss.78, (Özet Bildiri)

6. The Effect of Erodent Particle Size on Erosion Wear of Glass Fiber Reinforced Polyamide Composites

Gültürk E.
12th INTERNATIONAL CONFERENCE ON ENGINEERING & NATURAL SCIENCES December 24-25, 2021 / Bingol, Turkey , 24 - 25 Aralık 2021, ss.23-33, (Tam Metin Bildiri)

7. Multiple Nonlinear Neuro-Regression Modeling And Design Optimization Of The Rocket’s Different Sub-Units

Dinç M., Sargın T., Aydın L., Gültürk E.
1st International Congress on Artificial Intelligence and Data Science, İzmir, Türkiye, 26 - 28 Kasım 2021, ss.330-336, (Tam Metin Bildiri)

8. Katı Partikül Çarpma Açısının Cam Fiber Takviyeli Polyamid Kompozitlerin Erozif Aşınma Davranışına Etkisi

Gültürk E., Özzaim P., Korkusuz O. B.
8.International Congress on Engineering Architecture and Design, Ankara, Türkiye, 6 - 07 Aralık 2021, ss.385-394, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

9. A Novel Approach For Optimization of High Speed End Milling Parameters

Kavak B., Aydın L., Gültürk E.
International Congress on Multidisciplinary Natural Sciences and Engineering (ICOMNAS 2021) , Ankara, Türkiye, 1 - 02 Kasım 2021, ss.25, (Özet Bildiri)

10. Neuro Regression Analysis and Optimization of Laser Powder Deposition AlSi10Mg Alloy

Çiftçioğulları U., Aydın L., Gültürk E.
International Congress on Multidisciplinary Natural Sciences and Engineering (ICOMNAS 2021), Ankara, Türkiye, 1 - 02 Kasım 2021, ss.27, (Özet Bildiri)

11. Stochastic Optimization of Process Parameters for Pure Titanium Using Wire Electric Discharge Machining (WEDM) Process

Baytok Y. M., Aydın L., Gültürk E.
International Conference on Engineering Technologies ICENTE'04, Konya, Türkiye, 19 - 21 Kasım 2020, cilt.1, ss.281-286, (Tam Metin Bildiri)

12. Modeling and Optimum Parameters of CO2 Laser MIG Hybrid Welding Process

Türkoğlu R., Aydın L., Gültürk E.
The International Conference of Materials and Engineering Technology (TICMET'20), Gaziantep, Türkiye, 5 - 07 Kasım 2020, ss.515-525, (Tam Metin Bildiri)
Kitaplar 1

1. Maximization of Buckling Resistance for Lightweight Vegetable Based Hybrid Laminated Composites Combined with Synthetic Fibers

Savran M., Aydın L., Deveci H. A., Gültürk E.
Vegetable Fiber Composites and their Technological Applications, Mohammad Jawaid,Anish Khan, Editör, Springer, London/Berlin , Singapore, ss.81-105, 2021
Metrikler

Yayın

25

Yayın (WoS)

8

Yayın (Scopus)

9

Atıf (WoS)

66

H-İndeks (WoS)

4

Atıf (Scopus)

80

H-İndeks (Scopus)

4

Atıf (Scholar)

132

H-İndeks (Scholar)

5

Proje

2

Tez Danışmanlığı

1

Açık Erişim

1
BM Sürdürülebilir Kalkınma Amaçları
SDG 3: AMAÇ 3: SAĞLIKLI BİREYLER
SDG 12: AMAÇ 12: SORUMLU ÜRETİM VE TÜKETİM