Effect of heat treatment conditions on microstructure and wear behaviour of A14Cu2Ni2Mg alloy


Karakulak E., ZEREN M., YAMANOĞLU R.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, cilt.23, sa.7, ss.1898-1904, 2013 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 23 Sayı: 7
  • Basım Tarihi: 2013
  • Doi Numarası: 10.1016/s1003-6326(13)62675-8
  • Dergi Adı: TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.1898-1904
  • Anahtar Kelimeler: Al-Cu-Ni-Mg alloy, piston alloy, artificial aging, hardness, wear, ALUMINUM-ALLOY, SLIDING WEAR, PISTON ALLOYS, CU, COMPOSITES, MATRIX, FE, NI
  • Kocaeli Üniversitesi Adresli: Evet

Özet

Al4Cu2Ni2Mg alloy is an age-hardenable aluminum alloy. The effect of different solution and aging heat treatment conditions on the microstructure, hardness and wear resistance of the alloy was studied. The cast specimens were solution treated and then artificially aged. Optical microscopy and scanning electron microscopy were used to investigate the microstructures of the specimens. The hardness and wear tests were applied to understanding the effects of heat treatment. After aging for 8 h, the hardness of the alloy increases from HV10 96.5 to 151.1. Aging treatment for a longer duration causes a drop in the hardness because of over aging. Increasing the hardness of the alloy increases the wear resistance. As a result of all tests, solution heat treatment at 540 degrees C for 8 h and aging at 190 degrees C for 8 h were chosen for optimum heat treatment conditions for this alloy.