Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Effect of Surface Mechanical Attrition Treatment on Surface Topography and Dry Sliding Wear Performance of AA7075-T6

YARAR E., ERTÜRK A. T., KARABAY S.
Advanced Engineering Materials , cilt.26, sa.21, 2024 (SCI-Expanded) identifier

Experimental and Numerical Vibration Analysis of Surface Mechanical Attrition Treatment

Yarar E., Ertürk A. T., Açıkgöz Ç., Karabay S.
JVC/JOURNAL OF VIBRATION AND CONTROL , cilt.28, ss.1-17, 2022 (SCI-Expanded)

Dynamic Finite Element Analysis on Single Impact Plastic Deformation Behavior Induced by SMAT Process in 7075-T6 Aluminum Alloy

YARAR E., ERTÜRK A. T., KARABAY S.
Metals and Materials International , cilt.27, sa.8, ss.2600-2613, 2021 (SCI-Expanded) identifier identifier

Investigation of the effects of ultrasonic assisted drilling on tool wear and optimization of drilling parameters

Yarar E., Karabay S.
CIRP Journal of Manufacturing Science and Technology , cilt.31, ss.265-280, 2020 (SCI-Expanded) identifier identifier

Machining behavior of multiple layer polymer composite bearing with using different drill bits

ERTÜRK A. T., VATANSEVER F., YARAR E., KARABAY S.
Composites Part B: Engineering , cilt.176, 2019 (SCI-Expanded) identifier identifier

Improving mechanical properties of AlSi10Mg aluminum alloy using ultrasonic melt treatment combined with T6 heat treatment

VATANSEVER F., ERTÜRK A. T., KARABAY S.
Kovove Materialy , cilt.57, sa.1, ss.33-43, 2019 (SCI-Expanded) Creative Commons License identifier identifier

Failure analysis of wire-breaks in aluminum conductor production and investigation of early failure reasons for transmission lines

KARABAY S., ERTÜRK A. T., ZEREN M., YAMANOĞLU R., KARAKULAK E.
ENGINEERING FAILURE ANALYSIS , cilt.83, ss.47-56, 2018 (SCI-Expanded) identifier identifier

Vibration noise harshness of a light truck driveshaft, analysis and improvement with six sigma approach

ERTÜRK A. T., KARABAY S., BAYNAL K., Korkut T.
Acta Physica Polonica A , cilt.131, sa.3, ss.477-480, 2017 (SCI-Expanded) identifier identifier

Determination of Zr Inoculation Effect on Improving Thermal Resistivity of EC Grade Aluminum

ERTÜRK A. T., GÜVEN E. A., KARABAY S.
Transactions of the Indian Institute of Metals , cilt.68, sa.4, ss.535-541, 2015 (SCI-Expanded) identifier identifier

Influence of Different Heat Treatments on the Solid Particle Erosion Behavior of Aluminum Alloy AA 7075 in Industrial Applications

KARABAY S., Bayraklilar M. S., BALCI E.
ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1052-1054, 2015 (SCI-Expanded) identifier identifier

Manufacturing of Al-Zr thermal-resistant alloys for transmission lines

ERTÜRK A. T., GÜVEN E. A., KARABAY S.
Acta Physica Polonica A , cilt.127, sa.4, ss.1292-1294, 2015 (SCI-Expanded) identifier identifier

Processing damages of material components of aerial conductors and their tribological behaviors under dry friction

FEYZULLAHOĞLU E., KARABAY S.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , cilt.14, sa.4, ss.682-690, 2014 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Determination of early failure sources and mechanisms for Al 99.7% and Al-Mg-Si alloy bare conductors used in aerial transmission lines

KARABAY S., FEYZULLAHOĞLU E.
ENGINEERING FAILURE ANALYSIS , cilt.38, ss.1-15, 2014 (SCI-Expanded) identifier identifier

Increasing Lightning Strength of Optical Ground Conductors

Karabay S.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.67, sa.1, ss.105-114, 2014 (SCI-Expanded) identifier identifier

THE EFFECT OF HEAT TREATMENTS ON THE SOLID-PARTICLE EROSION BEHAVIOR OF THE ALUMINUM ALLOY AA2014

Karabay S.
MATERIALI IN TEHNOLOGIJE , cilt.48, sa.1, ss.141-147, 2014 (SCI-Expanded) identifier identifier

Modification of Conductive Material AA6101 of OPGW Conductors against Lightning Strikes

KARABAY S.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.59, ss.451-461, 2013 (SCI-Expanded) Creative Commons License identifier identifier

Enhancement on Al-Mg-Si alloys against failure due to lightning arc occurred in energy transmission lines

KARABAY S., GÜVEN E. A., ERTÜRK A. T.
Engineering Failure Analysis , cilt.31, ss.153-160, 2013 (SCI-Expanded) identifier identifier

Detecting Groan Sources in Drum Brakes of Commercial Vehicles by TVA-FMEA: A Case Study

KARABAY S., BAYNAL K., Igdeli C.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.59, sa.6, ss.375-386, 2013 (SCI-Expanded) Creative Commons License identifier identifier

A Study on the Derivation of Parametric Cutting Force Equations in Drilling of GFRP Composites

OKUTAN E., KARABAY S., SINMAZÇELİK T., AVCU E.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.59, sa.2, ss.97-105, 2013 (SCI-Expanded) Creative Commons License identifier identifier

Performance testing of an optical ground wire composite

KARABAY S., GÜVEN E. A., ERTÜRK A. T.
Materiali in Tehnologije , cilt.47, sa.1, ss.119-124, 2013 (SCI-Expanded) identifier identifier

THE COMPARISON OF SOLID PARTICLE EROSION BEHAVIORS OF AA-1070 AND AA-6101 ALLOYS USED INPOWER TRANSMISSION LINES IN TURKEY

AVCU E., FİDAN S., KARABAY S., SINMAZÇELİK T.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.27, sa.4, ss.865-874, 2012 (SCI-Expanded) identifier identifier

ACSS/TW aerial high-temperature bare conductors as a remedy for increasing transmission line capacity and determination of processing parameters for manufacturing

Karabay S.
MATERIALS & DESIGN , cilt.30, sa.3, ss.816-825, 2009 (SCI-Expanded) identifier identifier

Importance of early detection of maintenance problems in rotating machines in management of plants: Case studies from wire and tyre plants

KARABAY S., Uzman I.
ENGINEERING FAILURE ANALYSIS , cilt.16, sa.1, ss.212-224, 2009 (SCI-Expanded) identifier identifier

Influence of AlB2 compound on elimination of incoherent precipitation in artificial aging of wires drawn from redraw rod extruded from billets cast of alloy AA-6101 by vertical direct chill casting

Karabay S.
MATERIALS & DESIGN , cilt.29, sa.7, ss.1364-1375, 2008 (SCI-Expanded) identifier identifier

Performance testing of a constructed drilling dynamometer by deriving empirical equations for drill torque and thrust on SAE 1020 steel

Karabay S.
MATERIALS & DESIGN , cilt.28, sa.6, ss.1780-1793, 2007 (SCI-Expanded) identifier identifier
Diğer Dergilerde Yayınlanan Makaleler

PID ve Bulanık Mantık Kontrol Sistemleri ile İki Tekerlekli KendiniDengeleyebilen Robotik Sistem Tasarımı

PEÇE F., YARAR E., KARABAY S.
Kocaeli Üniversitesi Fen Bilimleri Dergisi , 2020 (Hakemli Dergi)

A STUDY ON THE POSSIBLE USE AA-6101 ALLOYS AS A MATERIAL TO MANUFACTURE AAAC ALUMINUM

ZEREN M., KARABAY S.
Kocaeli Journal of Science and Engineering , 2012 (Hakemli Dergi)

Transmisyon hatlarını koruyan opgw konstrüksiyonları ve yıldırım düşmelerine karşı tasarım kriteri

KARABAY S., ERTÜRK A. T., GÜVEN E. A.
Metal Dünyası , cilt.3, sa.226, ss.72-77, 2012 (Hakemli Dergi)

Kompozit İletken Konstrüksiyonlarında Elastisite E Ve Termik Uzama Katsayısı Parametrelerinin Hesaplanması

KARABAY S., GÜVEN E. A.
Metal Dünyası , cilt.1, sa.212, ss.124-127, 2011 (Hakemli Dergi)

Ekstrüzyon Mamullerinde Eloksal Sonrası Görülen Bantlı Yapıların Nedenleri

KARABAY S., ERTÜRK A. T., GÜVEN E. A.
Metal Dünyası , cilt.10, sa.221, ss.106-109, 2011 (Hakemli Dergi)

Uluslararası İletken Piyasalarından Talep Gören Al 59 1120 ve AA 6101 İletken Alaşımları ve Fiziksel Özellikleri

KARABAY S., GÜVEN E. A.
Metal Dünyası , cilt.2, sa.213, ss.106-110, 2011 (Hakemli Dergi)

Orta ve Yüksek Gerilim Enerji Kablolarında Çok Telli Alüminyum İletkenlerinin Soğuk Haddeleme İşleminde Ovallik Sorunu ve Önlenmesi

KARABAY S., GÜVEN E. A., ERTÜRK A. T.
Metal Dünyası , cilt.9, sa.220, ss.96-100, 2011 (Hakemli Dergi)

Isıya dayanıklı Al-Zr alaşımlı iletkenlerin teknik karakteristikleri ve geleneksel iletkenlerle karşılaştırılması

KARABAY S., TAYŞI Y., YILMAZ M.
Mühendis ve Makina , cilt.46, sa.540, ss.12-19, 2005 (Hakemli Dergi)

Enerji nakil hatlarında kullanılan OPT-GW kompozit iletkeninin tasarımı ve imalat teknikleri

KARABAY S., TAYŞI Y., YILMAZ M.
MÜHENDİS VE MAKİNA , cilt.45, sa.530, ss.37-42, 2004 (Hakemli Dergi)

Alüminyum iletken imalat sanayiinde AlB2 ve AlB12 ön-alaşımlarının 99.5- 99.7Al ve AlMg0.7Si alaşımları üzerindeki iletkenlik tesirlerinin araştırılması

KARABAY S., YILMAZ M.
METALURJİ , sa.132, ss.56-62, 2003 (Hakemli Dergi)

AA-6101 Alaşımının yüksek gerilim çıplak havai hatlarında AAAC iletkeni olarak kullanımı

KARABAY S., ZEREN M., YILMAZ M.
METALURJİ , sa.132, ss.56-62, 2003 (Hakemli Dergi)
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

DH36 Çelik Bir Yapı Üzerinde İletilebilirlilk Yaklaşımı İle Hasar Tespit Metodolojisinin Uygulanması

KARA M., YARAR E., KARABAY S.
ASES International Health, Engineering and Sciences Congress, Türkiye, 07 Mayıs 2022

KAĞIT İŞLETMELERİNDE KESTİRİMCİ BAKIM UYGULAMALARI ve TİTREŞİMANALİZİ

Dereoğlu F., YARAR E., KARABAY S.
International Marmara Sciences Congress (Spring) 2020, 19 - 20 Haziran 2020

Micro Diameter Aluminum Conductor Wire Manufacturing for Advanced Technology Application

ERTÜRK A. T., Ocak N., KARABAY S., Akyüz O., GÜVEN E. A.
9. ULUSLARARASI ALUMİNYUM SEMPOZYUMU, İstanbul, Türkiye, 10 - 11 Ekim 2019, cilt.1, ss.341-343

Optimization of Cutting Parameters with Taguchi Method for Drilling of Composites

Yarar E., Vatansever F., Ertürk A. T., Karabay S.
IV. International Academic ResearchCongress (INES), Antalya, Türkiye, 30 Ekim - 03 Kasım 2018

SUPERPLASTIC FORMING OF ALUMINUM ALLOYS

VATANSEVER F., ERTÜRK A. T., KARABAY S.
3rd International Energy and Engineering Congress and Exhibition (UEMK 2018), Gaziantep, Türkiye, 18 - 19 Ekim 2018, ss.338-343 identifier

DESIGN and ANALYSIS of a MAGNETORHEOLOGICAL DAMPER

Olcay E., ERTÜRK A. T., VATANSEVER F., KARABAY S.
3rd International Energy and Engineering Congress and Exhibition (UEMK 2018), Gaziantep, Türkiye, 18 - 19 Ekim 2018, ss.329-337 identifier identifier

Effect of Cooling Rate on the Microstructural and Mechanical Properties of Aluminum Alloys

ERTÜRK A. T., VATANSEVER F., KARABAY S.
3rd International Conference on Engineering Technology and Applied Sciences (ICETAS), Üsküp, Makedonya, 17 - 21 Temmuz 2018, ss.31

The Effect of Ultrasonic Melt Treatment on the Microstructural and Mechanical Properties of Aluminum Alloys

VATANSEVER F., ERTÜRK A. T., KARABAY S.
3rd International Conference on Engineering Technology and Applied Sciences (ICETAS), 17 - 21 Temmuz 2018, ss.32

EXPERIMENTAL STUDY ON ULTRASONIC ASSISTED DRILLING OF AA6061-T6

YARAR E., KARABAY S.
II. INTERNATIOANL ACADEMIC RESEARCH CONGRESS, 18 - 21 Ekim 2017

THE EFFECTS OF ULTRASONIC ASSISTED DRILLING ON TOOL WEAR

YARAR E., KARABAY S.
II. INTERNATIONAL ACADEMIC RESEARCH CONGRESS, 18 - 21 Ekim 2017

Forgability of Aluminum 7075 Alloy in Closed Die

YARAR E., GÜVEN E. A., BALCI E., KARABAY S., ELTUT S. B.
II. INTERNATIONAL ACADEMICRESEARCH CONGRESS, 18 - 21 Ekim 2017

Yüksek Sıcaklıklarda Dayanımı Artırılmış Alüminyum İlekten İmalatı

ERTÜRK A. T., GÜVEN E. A., KARABAY S., Uncu Ü. G., Binbuğa İ.
8.Alüminyum Sempozyumu, İstanbul, Türkiye, 5 - 06 Ekim 2017, cilt.1, ss.286-289

The effects on the surface roughness of Tool coating in Drilling of AA6061-T6

YARAR E., KARABAY S., GÜVEN E. A.
III International Conference on Engineering an Natural Science, Budapest, Macaristan, 3 - 07 Mayıs 2017, cilt.2, ss.546

Grain Refinement Of AA2014 Aluminum Alloy Using Ultrasonic Vibration

VATANSEVER F., GÜVEN E. A., ERTÜRK A. T., KARABAY S.
III International Conference on Engineering an Natural Sciences, Budapest, Macaristan, 3 - 07 Mayıs 2017, cilt.2, ss.248

Effect of Ultrasonic Melt Treatment on the Hardness of AA7075 Aluminum Alloy

VATANSEVER F., ERTÜRK A. T., GÜVEN E. A., KARABAY S.
III International Conference on Engineering an Natural Sciences, Budapest, Macaristan, 3 - 07 Mayıs 2017, cilt.2, ss.177

Forging Analysis Of AA2014 Alloy Under Different Conditions By Using Finite Elements Method

GÜVEN E. A., YARAR E., KARABAY S.
III International Conference on Engineering an Natural Science, Budapest, Macaristan, 3 - 07 Mayıs 2017, cilt.2, ss.238

Noise Vibration Harshness Analysis of a Light Truck Driveshaft and Improving with Six Sigma Approach

ERTÜRK A. T., KARABAY S., BAYNAL K., Korkut T.
6th International Advances in Applied Physics and Materials Science Congress & Exhibition (APMAS2016), 1 - 03 Haziran 2016

Ultrasonic Assisted Drilling of Aluminium 7075 T6

Yarar E., Karabay S.
International Conference on Engineering and Natural Sciences, Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016

Performance testing of an optical ground wire composites designed and manufactured for transmission lines and telecommunication systems

KARABAY S., GÜVEN E. A., ERTÜRK A. T.
20th Jubilee Conference On Materials and Technology, 18 - 20 Ekim 2012

Transmisyon Hatlarında Kullanılan Çelik Telli Mamullerin Rotary Ekstrüzyon Yöntemiyle Ömürlerinin Artırılması

KARABAY S., GÜVEN E. A., ERTÜRK A. T.
International Iron Steel Symposium, Karabük, Türkiye, 2 - 04 Nisan 2012, cilt.2, ss.651-658
Kitap & Kitap Bölümleri

Mekanik Titreşimler Cilt 1

KARABAY S.
Birsen Yayınevi, 2017

Mekanik Titreşimler Cilt 2

KARABAY S.
Birsen Yayınevi, 2017
Metrikler

Yayın

61

Atıf (WoS)

279

H-İndeks (WoS)

9

Atıf (Scopus)

344

H-İndeks (Scopus)

11

Atıf (Scholar)

117

H-İndeks (Scholar)

5

Proje

8

Açık Erişim

4
BM Sürdürülebilir Kalkınma Amaçları