Chemical Engineering Communications


Ekinci Z., Civan M. , Yurdakul S.

Chemical Engineering Communications, cilt.1, ss.1-14, 2020 (SCI Expanded İndekslerine Giren Dergi)

  • Cilt numarası: 1
  • Basım Tarihi: 2020
  • Doi Numarası: 10.1080/00986445.2020.1817743
  • Dergi Adı: Chemical Engineering Communications
  • Sayfa Sayıları: ss.1-14

Özet

In this study, the effects of particle size on combustion kinetics, mechanisms, and decomposition
characteristics of five wood samples were examined using thermogravimetric analysis
(TGA) under air atmosphere and three different heating rates (10, 40, and 80 C/min).
By using the both Flynn-Wall-Ozawa and Coats-Redfern methods, the highest activation
energies were found to be for the coarse samples except untreated pine samples. Only a
few studies in the literature investigated the effect of particle size on both thermal kinetics
and responsible mechanisms of solid biomass fuels under oxidative environment. Therefore,
the findings can be taken into consideration for highly efficient design and operation of
industrial thermochemical processes by using waste lignocellulosic biomass as a fuel. In this
study, the average activation energies calculated by Flynn-Wall-Ozawa were 166.57, 153.08,
and 171.42 kJ/mol for the smallest, medium and coarse samples, respectively. A similar trend
but lower values were also evaluated by Coats-Redfern and it was stated as 131.34, 137.52,
146.22 kJ/mol for the smallest, medium, and coarse samples, respectively. As particle size
increased lower combustion performance indexes were also obtained. Therefore, in addition
to the particle size, the chemical content of the samples also had an impact on the alteration
of the kinetic mechanisms and thermal decomposition properties of the samples.