Yayınlar & Eserler

Yayın Ağı
Makaleler 22
Tümü (22)
SCI-E, SSCI, AHCI (18)
SCI-E, SSCI, AHCI, ESCI (19)
Scopus (18)
TRDizin (1)
Diğer Yayınlar (3)

1. Effect of Si addition on microstructure and wear properties of Mg-Sn as-cast alloys

KARAKULAK E., Kucuker Y. B.
JOURNAL OF MAGNESIUM AND ALLOYS , cilt.6, sa.4, ss.384-389, 2018 (SCI-Expanded, Scopus) identifier identifier

2. Effects of Different Heat Treatments on Microstructure, Toughness and Wear Behavior of G-X 10CrNiMoNb 18-10 Cast Austenitic Stainless Steel

Türker M., Ertürk A. T., Karakulak E., Güven E. A.
Transactions of the Indian Institute of Metals , cilt.71, sa.4, ss.1033-1040, 2018 (SCI-Expanded, Scopus) identifier identifier

3. Effect of recycled polyethylene on storability of hazardous waste incinerator fly ashes: Towards a new composite material

Korucu M. K., Yamanoğlu R., Karakulak E., Yılmaz T., Karslı Yılmaz N. G.
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.24, ss.506-511, 2018 (TRDizin) Creative Commons License Sürdürülebilir Kalkınma identifier

4. Failure analysis of wire-breaks in aluminum conductor production and investigation of early failure reasons for transmission lines

KARABAY S., ERTÜRK A. T., ZEREN M., YAMANOĞLU R., KARAKULAK E.
ENGINEERING FAILURE ANALYSIS , cilt.83, ss.47-56, 2018 (SCI-Expanded, Scopus) identifier identifier

5. Characterization of Cu-Ti powder metallurgical materials

KARAKULAK E.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS , cilt.24, sa.1, ss.83-90, 2017 (SCI-Expanded) Creative Commons License identifier identifier

6. Mechanical properties of hypoeutectic Al-Ni alloys with Al3Ni intermetallics

KARAKULAK E., KOÇ F. G., YAMANOĞLU R., ZEREN M.
MATERIALS TESTING , cilt.58, sa.2, ss.117-121, 2016 (SCI-Expanded, Scopus) identifier identifier

7. Characterisation of nickel alloy powders processed by spark plasma sintering

YAMANOĞLU R., Bradbury W., Karakulak E., Olevsky E. A., German R. M.
POWDER METALLURGY , cilt.57, sa.5, ss.380-386, 2014 (SCI-Expanded, Scopus) identifier identifier

8. Investigation of corrosion and mechanical properties of Al-Cu-SiC-xNi composite alloys

Karakulak E., YAMANOĞLU R., Erten U., ZEREN A., ZOR S., ZEREN M.
MATERIALS & DESIGN , cilt.59, ss.33-37, 2014 (SCI-Expanded, Scopus) identifier identifier

9. Effect of nickel on microstructure and wear behaviour of pure aluminium against steel and alumina counterfaces

YAMANOĞLU R., Karakulak E., ZEREN M., KOÇ F. G.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH , sa.5, ss.289-295, 2013 (SCI-Expanded, Scopus) identifier identifier

10. Effect of heat treatment on erosive wear behaviour of Ti6Al4V alloy

FİDAN S., AVCU E., Karakulak E., YAMANOĞLU R., ZEREN M., SINMAZÇELİK T.
MATERIALS SCIENCE AND TECHNOLOGY , cilt.29, sa.9, ss.1088-1094, 2013 (SCI-Expanded, Scopus) identifier identifier

11. Effect of heat treatment on the tribological properties of Al-Cu-Mg/nanoSiC composites

YAMANOĞLU R., Karakulak E., ZEREN A., ZEREN M.
MATERIALS & DESIGN , cilt.49, ss.820-825, 2013 (SCI-Expanded, Scopus) identifier identifier

12. Effect of heat treatment conditions on microstructure and wear behaviour of A14Cu2Ni2Mg alloy

Karakulak E., ZEREN M., YAMANOĞLU R.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.23, sa.7, ss.1898-1904, 2013 (SCI-Expanded, Scopus) identifier identifier

13. Effect of titanium addition on corrosion properties of Al-Si eutectic alloys

Zor S., Zeren M., Özkazanç H., Karakulak E.
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES , cilt.48, sa.5, ss.568-571, 2012 (SCI-Expanded, Scopus) identifier identifier

14. Alüminyumun Mikroyapı ve Sertliğine Nikelin Etkisi

ZEREN M., YAMANOĞLU R., KARAKULAK E., KOÇ F. G., ERGÜN Y. S.
Metal Dünyası , sa.225, ss.76-78, 2012 (Hakemli Dergi)

15. MECHANICAL AND WEAR PROPERTIES OF PRE-ALLOYED MOLYBDENUM P/M STEELS WITH NICKEL ADDITION

YAMANOĞLU R., Karakulak E., ZEREN M.
JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY , cilt.48, sa.2, ss.251-258, 2012 (SCI-Expanded, Scopus) identifier identifier

16. Influence of Cu addition on microstructure and hardness of near-eutectic Al-Si-xCu-alloys

ZEREN M., Karakulak E., GÜMÜŞ S.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.21, sa.8, ss.1698-1702, 2011 (SCI-Expanded, Scopus) identifier identifier

17. Effect of Cu content on the corrosion of Al-Si eutectic alloys in acidic solutions

ZOR S., ZEREN M., ÖZKAZANÇ H., Karakulak E.
ANTI-CORROSION METHODS AND MATERIALS , cilt.57, sa.4, ss.185-191, 2010 (SCI-Expanded, Scopus) identifier identifier

18. Study on hardness and microstructural characteristics of sand cast Al-Si-Cu alloys

ZEREN M., Karakulak E.
BULLETIN OF MATERIALS SCIENCE , cilt.32, sa.6, ss.617-620, 2009 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

19. Microstructural chracterisation of Al-Si-xTi cast alloys

ZEREN M., Karakulak E.
MATERIALS SCIENCE AND TECHNOLOGY , cilt.25, sa.10, ss.1211-1214, 2009 (SCI-Expanded, Scopus) identifier identifier

20. Al Si Ötektik Alaşımlarına Cu İlavesinin Etkisi

ZEREN M., ZOR S., KARAKULAK E., ÖZKAZANÇ H.
Metal Dünyası , cilt.191, ss.93-95, 2009 (Hakemli Dergi)

21. Influence of Ti addition on the microstructure and hardness properties of near-eutectic Al-Si alloys

ZEREN M., Karakulak E.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.450, ss.255-259, 2008 (SCI-Expanded, Scopus) identifier identifier

22. Al Si Ötektik Alaşımlarının Korozyon Özelliklerine Titanyum İlavesinin Etkisi

ZOR S., ZEREN M., ÖZKAZANÇ H., KARAKULAK E.
Metal Dünyası , cilt.183, ss.105-107, 2008 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 6

1. Using fly ash as a reinforcement to increase wear resistance of pure magnesium

KARAKULAK E., YAMANOĞLU R., ZEREN M.
International conference on materials and materials processing, 7 - 08 Temmuz 2016, cilt.3, ss.269-272, (Tam Metin Bildiri)

2. MECHANICAL PROPERTIES OF Al Ni CAST ALLOYS Koc Funda Gul Karakulak Erdem Yamanoglu Ridvan Zeren M 2016

KOÇ F. G., KARAKULAK E., YAMANOĞLU R., ZEREN M.
23rd International Conference on Metallurgy and Materials, 21 - 23 Mayıs 2014

3. PRODUCTION AND CHARACTERIZATION OF HOT PRESSED Al-Ni ALLOYS

Karakulak E., YAMANOĞLU R., ZEREN M., Dundar E. E.
23rd International Conference on Metallurgy and Materials, Brno, Çek Cumhuriyeti, 21 - 23 Mayıs 2014, ss.1032-1038, (Tam Metin Bildiri) identifier identifier

4. MECHANICAL PROPERTIES OF Al-Ni CAST ALLOYS

KOÇ F. G., Karakulak E., YAMANOĞLU R., ZEREN M.
23rd International Conference on Metallurgy and Materials, Brno, Çek Cumhuriyeti, 21 - 23 Mayıs 2014, ss.1283-1287, (Tam Metin Bildiri) identifier identifier

5. Production of silver powders by prep atomization

Karakulak E., YAMANOĞLU R., ZEREN M.
European International Powder Metallurgy Congress and Exhibition, Euro PM 2012, Basel, İsviçre, 16 - 19 Eylül 2012, cilt.1, (Tam Metin Bildiri) identifier

6. Tribological properties of vacuum hot pressed Al-Cu-Mg-SiC composites

YAMANOĞLU R., Karakulak E., ZEREN M.
European International Powder Metallurgy Congress and Exhibition, Euro PM 2012, Basel, İsviçre, 16 - 19 Eylül 2012, cilt.1, (Tam Metin Bildiri) identifier
Metrikler

Yayın

28

Yayın (WoS)

21

Yayın (Scopus)

22

Atıf (WoS)

397

H-İndeks (WoS)

11

Atıf (Scopus)

459

H-İndeks (Scopus)

12

Atıf (Scholar)

173

H-İndeks (Scholar)

6

Atıf (Diğer Toplam)

1

Proje

1

Açık Erişim

3
BM Sürdürülebilir Kalkınma Amaçları