Investigation of Microstructure, Microhardness and Thermal Properties of Ag-In Intermetallic Alloys Prepared by Vacuum Arc Meltings


Çelık E., Ata Esener P., ÖZTÜRK E., Aksöz S.

Journal Wuhan University of Technology, Materials Science Edition, cilt.39, sa.1, ss.182-187, 2024 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 39 Sayı: 1
  • Basım Tarihi: 2024
  • Doi Numarası: 10.1007/s11595-024-2870-1
  • Dergi Adı: Journal Wuhan University of Technology, Materials Science Edition
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Aerospace Database, Communication Abstracts, Compendex, ICONDA Bibliographic, Metadex, Civil Engineering Abstracts
  • Sayfa Sayıları: ss.182-187
  • Anahtar Kelimeler: alloys, material characterization, microhardness, microstructure characterization, thermal properties
  • Kocaeli Üniversitesi Adresli: Evet

Özet

Ag-In intermetallic alloys were produced by using vacuum arc furnace. Differential Scanning Calorimetry (DSC) and Energy Dispersive X-Ray Spectrometry (EDX) were used to determine the thermal properties and chemical composition of the phases respectively. Microhardness values of Ag-In intermetallics were calculated with Vickers hardness measurement method. According to the experimental results, Ag-34 wt%In intermetallic system generated the best results of energy saving and storage compared to other intermetallic systems. Also from the microhardness results, it was observed that intermetallic alloys were harder than pure silver and Ag-26 wt% In system had the highest microhardness value with 143.45 kg/mm2.