AN EXPERIMENTAL INVESTIGATION OF SOLID OXIDE FUEL CELL PERFORMANCE AT VARIABLE OPERATING CONDITIONS

Creative Commons License

Tikiz İ., Taymaz I.

THERMAL SCIENCE, cilt.20, sa.5, ss.1421-1433, 2016 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 20 Sayı: 5
  • Basım Tarihi: 2016
  • Doi Numarası: 10.2298/tsci130617019t
  • Dergi Adı: THERMAL SCIENCE
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.1421-1433
  • Anahtar Kelimeler: fuel cell, solid oxide fuel cell, cell performance, RESPONSE-SURFACE METHODOLOGY, TEMPERATURE, OPTIMIZATION, STACK, SOFC, CATHODE, DESIGN, POWER
  • Kocaeli Üniversitesi Adresli: Hayır

Özet

Cell temperature and selection of the reactant gases are crucial parameters for the design and optimization of fuel cell performance. In this study, effect of operating conditions on the performance of solid oxide fuel cell has been investigated. Application of response surface methodology was applied to optimize operations conditions in solid oxide fuel cell. For this purpose, an experimental set-up for testing of solid oxide fuel cell has been established to investigate the effect of hydrogen, oxygen, nitrogen flow rates and cell temperature parameters on cell performance. Hydrogen flow rate, oxygen flow rate, nitrogen flow rate, and cell temperature were the main parameters considered and they were varied between 0.25 and 1 L/min, 0.5 and 1 L/min, 0 and 1 L/min, and 700-800 degrees C in the analyses, respectively. The maximum power density was found as 0.572 W/cm(2) in the experiments.