Duran İ., Samatya Yılmaz S., Karagül M. S., Aytaç A.
Journal of Polymer Science, cilt.1, ss.1-15, 2026 (Hakemli Dergi)
Özet
ABSTRACT
In this study, composites were produced by extrusion melt mixing and injection molding methods by adding olive leaf powder (OLP) to a PLA/PBS polymer blend matrix at weight percentages of 10%, 20%, and 30%. SEM analysis showed that at low OLP ratios, the additive was well distributed in the matrix, while at high OLP ratios, void and crack formation increased, and a more heterogeneous morphology was formed because of weakened interfacial interactions. FTIR results confirmed the formation of hydrogen bonds between OLP and the polymer matrix. DSC results showed that the addition of OLP had a limited effect on
T
g
. Mechanical properties showed near‐blend properties at low additive ratios, while high additive ratios caused a decrease in tensile strength and elongation. Rheological analysis results showed that while the 10% additive exhibited behavior similar to the blend sample, the viscosity and storage modulus increased at low frequencies with 20% and 30% additives, indicating restricted chain movement. Antibacterial analysis demonstrated that the added OLP showed antibacterial activity against both
E. coli
and
S. aureus
. The results of this study highlight the importance of low‐percentage OLP use in PLA/PBS biodegradable blends in terms of improving composite properties and providing antibacterial effects.