Engineering Analysis with Boundary Elements, cilt.148, ss.205-219, 2023 (SCI-Expanded)
© 2022 Elsevier LtdTurbulent forced convective flow of hybrid and single nanofluids in a conical diffuser is investigated numerically. Simulations are conducted for various Reynolds (Re=10000-70000) and different concentrations (ϕ=0-1.5 vol%) at equal ratio of TiO2:SiO2. The impact of using theoretical and experimental correlations for dynamic viscosity and thermal conductivity on turbulent forced convection of TiO2 showed that the mean Nusselt (Nu) number is considerably reduced with the use of the experimental model. However, when the theoretical model is used, Nu varies insignificantly. Addition of TiO2 nanoparticles decreases the heat transfer inside the diffuser, whereas addition of TiO2–SiO2 nanoparticles either enhances or decreases the heat transfer rate. Compared to the pure fluid, hybrid nanofluids show a maximum enhancement of 5% and a maximum decrease of 9.7% at ϕ= 0.5 vol% and ϕ= 0.5 vol% at Re=10000, respectively. However, TiO2 nanofluids show a maximum decrease of 19% at ϕ=1.5 vol% and Re= 30000. As Re increases, the deviations between TiO2 and SiO2-TiO2 nanofluids diminish. Moreover, the Gene Expression Programming model can accurately evaluate Nu versus Re number and nanoparticle concentration.