Research Information System
Ceramics International, vol.48, no.5, pp.7093-7105, 2022 (SCI-Expanded)
© 2021 Elsevier Ltd and Techna Group S.r.l.Pure and Ce-doped ZnO photocatalyst nanorods were both grown on α-Al2O3 ceramic foams manufactured using a polymeric sponge replication technique. A three-dimensional network of α- Al2O3 struts which served as the substrate for the photocatalyst material was first seeded via dip coating. The seed-mediated synthesis of ZnO nanorods with controlled lengths and diameters was then carried out at low temperature (∼95 °C) by chemical bath deposition (CBD). Their morphologies and crystallographic orientations were verified using scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. The effect of Ce-doping on the optical properties of the ZnO nanorods was investigated by ultraviolet–visible (UV–Vis) and photoluminescence (PL) spectroscopies. There was a modification in the band-gap structure with the incorporation of cerium atoms in the ZnO matrix as observed by the partial redshift at the absorption edges and by the blue and green light emissions. Color removal efficiencies of the samples were evaluated under UVA and visible light irradiations over the photocatalytic degradation of Acid Red 88 (AR88) azo dye molecules dissolved in water. Enhanced degradation rates were achieved for the Ce-doped samples compared to those of the pure ones. Similarly, the extend of mineralization (i.e., total organic carbon (TOC) removal) reached the maximum value of 54% for the Ce-doped samples under UVA light. According to the scavenging experiment results, it was found that the most effective radical involved in the present photocatalytic degradation reactions was the superoxide anion (·O2−).