Akademik Veri Yönetim Sistemi
JOURNAL OF PROSTHETIC DENTISTRY, cilt.130, sa. article in press, ss.1-11, 2023 (SCI-Expanded)
Statement of problem.The effects of the internal contact surfaces of dental implants on screw loosening have yet to be investigated. Purpose.The purpose of this 3-dimensional finite element analysis (FEA) study was to evaluate and compare the mechanical effects of the abutment implant angle (θ), the abutment screw head diameter (D), and the abutment screw length (L) on screw loosening. Material and methods.A total of 27 models presenting various mechanical scenarios were built by using combinations of 3 different θ (30 degrees, 45 degrees, and 60 degrees), D (2.65 mm, 2.75 mm, and 2.85 mm), and L (4 mm, 5 mm, and 6 mm). In FEA, a static test with a 200-N force inclined 30 degrees in the implant axial direction was applied to the upper surface of the abutment to evaluate and compare the maximum von Mises stresses of the implant components and the maximum total deformation in all models. In addition, modal analysis was applied to identify the natural frequencies in all models under free (unforced) vibration, and a Kruskal-Wallis statistical test (α=.05) was performed, followed by multiple pairwise comparisons by using the Dunn test. Results.The Kruskal-Wallis test found a significant influence of the θ on implant stress, total deformation, and natural frequency (P<.001). For example, increasing the θ from 30 degrees to 45 degrees and 60 degrees can considerably reduce the model’s natural frequencies to 18% and 26%, respectively. Similarly, the test underscored the significant impact of the D on both abutment screw stress and abutment stress (P=.010 and P=.002, respectively). However, the L appeared to have no significant effect on any of the dependent variables (P>.05). Conclusions.The θ and the D significantly influenced the stresses of dental implant components, total deformation, and natural frequency of the model, which may impact the mechanical stability of the screw joint. However, the L does not appear to affect these values significantly.