Investigation of the Effect of Laser Parameters on Grooves Created on S420MC Stainless Steel

Canel T., Gezer Z.

6th INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES, Antalya, Türkiye, 2 - 05 Kasım 2023, cilt.1, sa.1, ss.73, (Özet Bildiri)

  • Yayın Türü: Bildiri / Özet Bildiri
  • Cilt numarası: 1
  • Basıldığı Şehir: Antalya
  • Basıldığı Ülke: Türkiye
  • Sayfa Sayıları: ss.73
  • Kocaeli Üniversitesi Adresli: Evet

Özet

In this study, it was tried to obtain dimples on polyamide plates. With the CO2 laser, laser

beams with 300 μm diameter and different powers from 25 W to 75 W were sent on the

material. The resulting dimples and the Heat Affected Zone formed around the dimples were

examined with an optical microscope. As a result of the measurements made on the optical

microscope images, the dimple width, and depth were measured. Optimum laser parameters

were calculated to obtain dimples that have a maximum aspect ratio