Publications & Works

Publication Network
Journal articles indexed in SCI, SSCI, and AHCI

Face recognition using deep learning on Raspberry Pi

Aboluhom A. A. A., KANDİLLİ İ.
COMPUTER JOURNAL , vol.67, no.10, pp.3020-3030, 2024 (SCI-Expanded) identifier identifier

Dynamic Centripetal Parameterization Method for B-Spline Curve Interpolation

Balta C., Ozturk S. T., Kuncan M., KANDİLLİ İ.
IEEE ACCESS , vol.8, pp.589-598, 2020 (SCI-Expanded) Creative Commons License identifier identifier

Hybrid Spiral STC-Hedge Algebras Model in Knowledge Reasonings for Robot Coverage Path Planning and Its Applications

Hai Van Pham H. V. P., Asadi F., ABUT N., KANDİLLİ İ.
APPLIED SCIENCES-BASEL , vol.9, no.9, 2019 (SCI-Expanded) Creative Commons License identifier identifier

Experimental Performance Evaluation of a Power Generation System Using SEIG

KANDİLLİ İ.
ELEKTRONIKA IR ELEKTROTECHNIKA , vol.23, no.1, pp.10-14, 2017 (SCI-Expanded) Creative Commons License identifier identifier

A comparison of the effects of problem-based learning and computer-assisted learning methods on student success in mechatronics education

KANDİLLİ İ., KARAKAŞ E.
ENERGY EDUCATION SCIENCE AND TECHNOLOGY PART B-SOCIAL AND EDUCATIONAL STUDIES , vol.4, no.2, pp.963-970, 2012 (SCI-Expanded) identifier identifier

Tracking control based on neural network for robot manipulator

Sonmez M., Kandilli I., Yakut M.
ARTIFICIAL INTELLIGENCE AND NEURAL NETWORKS , vol.3949, pp.49-57, 2006 (SCI-Expanded) identifier
Articles Published in Other Journals

Yeraltı Metro Hatlarında Video Analiz Yöntemiyle Olay Algılama Kontrolünün Gerçekleştirilmesi

ÇEKEREK E., KANDİLLİ İ., KUNCAN M.
El-Cezeri Fen ve Mühendislik Dergisi , vol.7, no.3, pp.1025-1038, 2020 (Scopus) identifier

Dynamics and control of a novel buck-boost converter with low stresses on switches and diodes

Asadi F., ABUT N., KANDİLLİ İ.
INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES , vol.4, no.8, pp.149-153, 2017 (ESCI) Creative Commons License identifier

Joy of controller design: Controller design based on Kocaeli university's converter dynamics toolbox for MATLAB

Asadi F., ABUT N., KANDİLLİ İ.
INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES , vol.4, no.7, pp.5-10, 2017 (ESCI) Creative Commons License identifier

A novel buck-boost converter

Asadi F., ABUT N., KANDİLLİ İ.
INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES , vol.4, no.5, pp.133-137, 2017 (ESCI) Creative Commons License identifier

A simple method for electrical machine's mechanical parameter extraction

Asadi F., ABUT N., KANDİLLİ İ.
INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES , vol.4, no.4, pp.164-169, 2017 (ESCI) Creative Commons License identifier

Real-time speed controlling of a DC motor using fuzzy logic controller

KANDİLLİ İ.
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.23, no.5, pp.543-549, 2017 (ESCI) Creative Commons License identifier

Tool Wear Monitoring System Using Artificial Neural Network

sönmez m., KANDİLLİ İ., ERTUNÇ H. M.
Journal of Naval Science and Engineering , vol.1, no.2, pp.9-18, 2003 (Peer-Reviewed Journal)
Papers Presented at Peer-Reviewed Scientific Conferences

REAL-TIME FACE RECOGNITION BASED ON MULTI-TASK LEARNING WITH RASPBERRY PI

Aboluhom A. A. A., Kandilli İ.
7th INTERNATIONAL ANTALYA CONGRESS OF SCIENTIFIC RESEARCH AND INNOVATIVE STUDIES , Antalya, Turkey, 11 - 13 May 2024, vol.1, pp.103-116, (Full Text)

Technical Review of Deneyap Card, Domestic Production of Electronıc Development Cards And Its Applicability in Projects

TUZANE G., KANDİLLİ İ.
IV. International Siirt Conference On Scientific Research, Siirt, Turkey, 17 November 2023, vol.1, pp.1043-1053, (Full Text)

FACE RECOGNITION SYSTEM USING DEEP LEARNING TECHNIQUES WITH RASPBERRY PI

Aboluhom A. A. A., KANDİLLİ İ.
III-INTERNATIONAL SIIRT CONFERENCE ON SCIENTIFIC RESEARCH, Siirt, Turkey, 18 November 2022, vol.1, pp.2018-2027, (Full Text)

TÜRKİYE’DE DENİZCİLİK EĞİTİMİ VEREN MESLEK YÜKSEKOKULU VE FAKÜLTELERDE KULLANILAN KÖPRÜÜSTÜ SİMÜLASYON SİSTEMLERİNİN VERİMLİLİĞİNİN İNCELENMESİ

BARIŞ S., KANDİLLİ İ.
International Marmara Sciences Congress (Spring 2021), Kocaeli, Turkey, 21 May 2021, vol.1, pp.404-410, (Full Text)

REVERS OSMOZ TESİSİNDE ÜRETİLEN SAF SU KALİTESİNİN UZAKTAN KONTROLÜ

SARKHOCH A., KANDİLLİ İ.
International Marmara Sciences Congress (Spring 2021), Kocaeli, Turkey, 21 May 2021, vol.1, pp.394-399, (Full Text)

AKILLI TELEFONLA SENSÖRLERİN İZLENMESİ VE KONTROLÜ

Muhammed ALİZADA M., KANDİLLİ İ., ÖZTÜRK S.
International Marmara Sciences Congress (Spring 2021), Kocaeli, Turkey, 21 May 2021, vol.1, pp.411-417, (Full Text)

SERVO PRESS CONTROL BY ETHERCAT

SARAÇ N. M., KANDİLLİ İ., KUNCAN M.
3. ASIA PACIFIC INTERNATIONAL CONGRESS ON CONTEMPORARY STUDIES, Seoul, South Korea, 10 April - 12 October 2020, pp.251-257, (Full Text)

SMART SOIL IRRIGATION SYSTEM

COGAY S., KANDİLLİ İ., KUNCAN M.
4th INTERNATIONAL ZEUGMA CONFERENCE ON SCIENTIFIC RESEARCHES, Gaziantep, Turkey, 29 - 31 May 2020, pp.249-256, (Full Text) Sustainable Development identifier identifier

FACE RECOGNITION SYSTEM WITH RASPBERRY PI

ÖZİŞ H., KANDİLLİ İ., KUNCAN M.
4th INTERNATIONAL ZEUGMA CONFERENCE ON SCIENTIFIC RESEARCHES, Gaziantep, Turkey, 29 - 31 May 2020, pp.178-185, (Full Text)

FOOD STOCK CONTROL

YÜREKLİ L. B., KANDİLLİ İ., KUNCAN M.
3. ASIA PACIFIC INTERNATIONAL CONGRESS ON CONTEMPORARY STUDIES, Seoul, South Korea, 10 - 12 April 2020, pp.259-265, (Full Text)

ONLİNE ÖLÇÜM SİSTEMLERİ VE SPEKTROFOTOMETRE (UV/VİSİBLE) ÖLÇÜMYAKLAŞIMLARI

SÖNMEZ M., KANDİLLİ İ., KUNCAN M., CENGİZ E.
IV. ULUSLARARASI MESLEKİ VE TEKNİK BİLİMLER KONGRESİ UMTEB, Erzurum, Turkey, 7 - 09 December 2018, vol.2, pp.2154-2159, (Full Text)

Marmara Bölgesinde Afet Çalışmalarının Değerlendirilmesi II

İPEK C., DİKİCİ M., pay i., KANDİLLİ İ., TOPCU İ.
6th International Symposium on Innovative Technologies in Engineering and Science, Antalya, Turkey, 9 - 11 November 2018, (Full Text)

Türk Kızılay’ının Afetteki rolü

İPEK C., DİKİCİ M., PAY İ., KANDİLLİ İ., TOPCU İ.
6th International Symposium on Innovative Technologies in Engineering and Science, Antalya, Turkey, 09 November 2018, vol.1, pp.709-718, (Full Text)

Controlling and Analysis of Waterline with the Pressure Management System

SÖNMEZ M., ŞEN C., KANDİLLİ İ., KUNCAN F., KUNCAN M.
1st INTERNATIONALENGINEERING ANDTECHNOLOGY SYMPOSIUM, Batman, Turkey, 3 - 05 May 2018, vol.1, pp.679-681, (Full Text)

Control of Mechatronic System with Remote SCADA

KANDİLLİ İ., KUNCAN F., CENGİZ E., KUNCAN M.
1st INTERNATIONALENGINEERING ANDTECHNOLOGY SYMPOSIUM, Batman, Turkey, 3 - 05 May 2018, vol.1, pp.909-911, (Full Text)

Energy Follow-up and Economic Approaches in the SCADA System

SÖNMEZ M., ŞEN C., KANDİLLİ İ., KUNCAN F., KUNCAN M., CENGİZ E.
1st INTERNATIONALENGINEERING ANDTECHNOLOGY SYMPOSIUM, Batman, Turkey, 3 - 05 May 2018, vol.1, pp.912-914, (Full Text)

ELEKTRONİK KART İMALATINDA DİZGİMAKİNELERİNDE GÖRÜNTÜ İŞLEME SİSTEMİNİNTASARLANMASI

saraç g., KANDİLLİ İ., KUNCAN M., KUNCAN F.
1st INTERNATIONALENGINEERING ANDTECHNOLOGY SYMPOSIUM, Batman, Turkey, 3 - 05 May 2018, vol.1, pp.111-112, (Full Text)

Solar Powered Boat Design

KANDİLLİ İ., KARAKAŞ E., KUNCAN M.
International Advanced Technologies Symposium (IATS17), 19 - 22 October 2017, (Full Text)

Design of Cooling and Heating System in Cars with Solar Energy

KANDİLLİ İ., MİNAZ M. R., KUNCAN M., KUNCAN F.
International Conference on Multidisciplinary, Science, Engineering and Technology(IMESET’17), Bitlis, Turkey, 27 - 29 October 2017, vol.1, pp.365-370, (Full Text)

Robot Design for Locating People in Earthquakes

KANDİLLİ İ., MİNAZ M. R., KUNCAN M., KUNCAN F.
International Conference on Multidisciplinary, Science, Engineering and Technology(IMESET’17), Bitlis, Turkey, 27 - 29 October 2017, vol.1, pp.354-358, (Full Text) Sustainable Development

Measuring and Controlling Water Quality in Real Time inDistribution Network

SÖNMEZ M., ŞEN C., KANDİLLİ İ., KUNCAN M.
8th International Advanced Technologies Symposium (IATS’17), Elazığ, Turkey, 19 - 22 October 2017, vol.1, pp.2117-2122, (Full Text)

Development of System Model for Use of Multiple-Drone afterNatural Disasters

KANDİLLİ İ., KUNCAN M.
IATS 2017 8th International Advanced Technologies Symposium, Elazığ, Turkey, 19 - 22 October 2017, vol.1, pp.2108-2012, (Full Text)

Distributed Equivalents of Lumped Element Networks

KANDİLLİ İ., KUNCAN M.
8th International Advanced Technologies Symposium (IATS’17), Elazığ, Turkey, 19 - 22 October 2017, vol.1, pp.2123-2130, (Full Text)

Güneş Enerjisi Kullanılarak Sulama Sistemleri için Yeni Bilgi Tabanlı Model

KANDİLLİ İ., GÜVEN A., KARAKAŞ E., KUNCAN M.
1st International Mediterranean Science and Engineering Congress, 26 - 28 October 2016, pp.2152-2157, (Full Text)

SCADA SİSTEMLERİNDE SEZGİSEL YAKLAŞIMLAR

şen c., sönmez m., KANDİLLİ İ., KUNCAN M.
International Engineering, Science and Education Conference, Diyarbakır, Turkey, 1 - 03 December 2016, vol.1, pp.865-872, (Full Text)

SCADA SİSTEMİNİN VERİ GÜVENİLİRLİĞİ

SÖNMEZ M., KANDİLLİ İ., KUNCAN M., KUNCAN F.
International Engineering, Science and Education Conference, Diyarbakır, Turkey, 1 - 03 December 2016, vol.1, pp.855-864, (Full Text)

Elektropnömatik sistemin gerçek zamanlı kontrolü vegözlemlenmesi

tuncer u., ÖZTÜRK S., KANDİLLİ İ., KUNCAN M.
İMSEC 2016, 26 - 28 October 2016, (Full Text)

Steril kabin ve çeker ocakların kontrol modülünün tasarımı

SARAÇ G., KANDİLLİ İ., KUNCAN M.
1st International Mediterranean Science and Engineering Congress, Adana, Turkey, 26 - 28 October 2016, pp.1996-2003, (Full Text)

Uzaktan erişimli tavuk çiftliği otomasyonu

SARAÇ G., KANDİLLİ İ., KUNCAN M.
1st International Mediterranean Science and Engineering Congress, Adana, Turkey, 26 - 28 October 2016, pp.2876-2884, (Full Text)

Geliştirilmiş Yerli Programlanabilir Denetleyici

saraç g., KANDİLLİ İ., süerkan r.
5th International Vocational Schools Symposium, Prizren, Serbia And Montenegro, 18 - 20 May 2016, vol.1, pp.169-174, (Full Text)

Negatif Basınçla Yara Kapama Cihazının Geliştirilmesi

saraç g., KANDİLLİ İ., süerkan r.
5th International Vocational Schools Symposium, Prizren, Serbia And Montenegro, 18 - 20 May 2016, vol.2, pp.807-810, (Full Text)

Tank Namlu Stabilizasyon Uygulaması

SUADİYE U., ÖZTÜRK S., KANDİLLİ İ.
Elektrik-Elektronik Bilgisayar Sempozyumu (FEEB 2011), Elazığ, Turkey, 5 - 07 October 2011, vol.1, pp.176-181, (Full Text)

ATIŞ KONTROL SİSYEMLERİNDE OTOMATİK NAMLU SABİTLEME SİSTEMİ (ONSS) VE TASARIMI

SARAÇ G., KANDİLLİ İ.
UMYOS2011 2. Uluslararası 6. Meslek Yüksekokulları Sempozyumu, Adnan Menderes Üniversitesi, Aydın Meslek Yüksekokulu, 25-27 Mayıs 2011, Aydın, Türkiye, Aydın, Turkey, 25 - 27 May 2011, vol.1, pp.1-8, (Full Text)

ÜÇ EKSENLİ İKİ BOYUTLU CNC TEZGAH TASARIMI

ŞENOL S., ÖZTÜRK S., KANDİLLİ İ.
UMYOS2011 2. Uluslararası 6. Meslek Yüksekokulları Sempozyumu, Aydın, Turkey, 25 - 27 May 2011, vol.1, pp.1-9, (Full Text)

THE EVALUATION OF THE VERTICAL TRANSITION EXAM (VTE) IN POINT OF CONTENT AND SUGGESTIONS

KANDİLLİ İ., ÖZKAN S. S., KARAYEL D.
1.Uluslararası 5.Ulusal Meslek Yüksekokulları Sempozyumu, Konya, Turkey, 27 May 2009, vol.1, pp.103-105, (Full Text)

GÖRÜNTÜ İŞLEME İLE NABIZ SAYISININ BELİRLENMESİ

YETİM ÇAKILCI K., YAKUT M., KANDİLLİ İ.
1.Uluslararası 5.Ulusal Meslek Yüksekokulları Sempozyumu, Konya, Turkey, 27 - 29 May 2009, vol.1, pp.855-859, (Full Text)

THE IMPORTANCE OF COMMUNICATION AMONG VOCATIONAL SCHOOLS OF HIGHER EDUCATION AND SEARCHING THE WAYS TO IMPROVE IT

ÖZKAN S. S., KARAYEL D., KANDİLLİ İ.
1.Uluslararası 5.Ulusal Meslek Yüksekokulları Sempozyumu, Konya, Turkey, 27 May 2009, vol.1, pp.1698-1702, (Full Text)

ADAPTATION ABSENCE’S ANALYSIS OF THE STUDENTS WHO ARE ADMISIONED WITHOUT EXAMINATION

YETİM K., KANDİLLİ İ., SÜERKAN R.
1.Uluslararası 5.Ulusal Meslek Yüksekokulları Sempozyumu, Konya, Turkey, 27 May 2009, vol.1, pp.2908-2914, (Full Text)

DEVELOPING AND IMPLEMENTING WEB BASED GRADUATE INFORMATION SYSTEM

KANDİLLİ İ., YETİM K., ÖZKAN S. S., KARAYEL D.
1.Uluslararası 5.Ulusal Meslek Yüksekokulları Sempozyumu, Konya, Turkey, 27 May 2009, vol.1, pp.3630-3632, (Full Text)

ANALYZING THE EFFECTS OF INCREASING DEMAND AND INTEREST FOR VOCATİONAL SCHOOLS OF HIGHER EDUCATION, ON EDUCATION

ÖZKAN S. S., KARAYEL D., KANDİLLİ İ.
1.Uluslararası 5.Ulusal Meslek Yüksekokulları Sempozyumu, Konya, Turkey, 27 May 2009, vol.1, pp.1550-1552, (Full Text)

Online Monitoring of Tool Wear and Drilling an Milling Operation with Vibration using Artificial Neural Network

KANDİLLİ İ., SÖNMEZ M., ERTUNÇ H. M.
PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE VIBROENGINEERING 2008, Kaunas, Lithuania, 9 - 11 October 2008, pp.63-67, (Full Text) identifier

SEKTÖR ZAMANLARINA GÖRE ZAMAN AŞIMLARINI KAYDEDEN HAFIZALI SAYAÇ TASARIMI

ŞENOL S., YAKUT M., SÖNMEZ M., KANDİLLİ İ.
EMO-IV.OTOMASYON SEMPOZYUMU, SAMSUN, Samsun, Turkey, 23 - 24 May 2007, vol.1, pp.33-36, (Full Text) Sustainable Development

Online monitoring of tool wear in drilling and milling by multi-sensor neural network fusion

KANDİLLİ İ., Soenmez M., Ertunc H. M., Cakur B.
IEEE International Conference on Mechatronics and Automation, Harbin, China, 5 - 08 August 2007, pp.1388-1391, (Full Text) identifier identifier

Determination of product surface quality

Cakilci K., Yakut M., KANDİLLİ İ.
IEEE 14th Signal Processing and Communications Applications, Antalya, Turkey, 16 - 19 April 2006, pp.329-330, (Full Text) identifier identifier

Dijital Görüntü İşleme ile Lazer Tarama Tekniği Kullanılarak Ürün Kalitesinin Belirlenmesi

ÇAKILCI YETİM K., YAKUT M., KANDİLLİ İ.
Pamukkale Üniversitesi III. Otomasyonsempozyumu,Denizli, Denizli, Turkey, 11 - 12 November 2005, vol.1, pp.1-5, (Full Text)

üç serbest dereceli endüstriyel robotun yapay sinir ağları denetimi

sönmez m., NİL M., YÜZGEÇ U., KANDİLLİ İ.
Elektrik, Elektronik ve Bilgisayar Mühendisliği Sempozyumu ve Fuarı, Bursa, Turkey, 8 - 12 December 2004, vol.1, pp.268-271, (Full Text)

Active Control of Machine Tool Spindle Vibration using an Electromagnetic Bearing

KARAYEL D., ÖZKAN S. S., KANDİLLİ İ.
Second International Conference on Electrical and Electronics Engineering,ELECO2001, Bursa, Turkey, 7 - 11 November 2001, vol.1, pp.246-250, (Full Text)

Decomposition of Turbulent Velocity Signals using Moving Average Filter

ERDİL A., ERTUNÇ H. M., KANDİLLİ İ., AYDIN K.
Second International Conference on Electrical and Electronics Engineering,ELECO2001, Bursa, Turkey, 7 - 11 November 2001, vol.1, pp.241-245, (Full Text)

The Active Vibration Control of the Hihg Speed Machine Tool Spindle using the Electromagnetic Damper

KARAYEL D., ÖZKAN S. S., KANDİLLİ İ.
1. International Conference on Information Technology in Mechatronics,ITM2001, İstanbul, Turkey, 1 - 03 October 2001, vol.1, pp.453-458, (Full Text)

The Determination of the Surface Roughness in the Intelligent Metal Cutting Process

KARAYEL D., ÖZKAN S. S., KANDİLLİ İ.
1. International Conference on Information Technology in Mechatronics,ITM2001, İstanbul, Turkey, 1 - 03 October 2001, vol.1, pp.459-462, (Full Text)
Books

3 EKSENLİ ROBOT MEKANİZMASI İLE DAMA OYUNU

GÖRGÜLÜ H. N., ÖZTÜRK S., KANDİLLİ İ., KUNCAN F.
in: MÜHENDİSLİK ALANINDA GÜNCEL ARAŞTIRMALAR, ÖZTÜRK Sıtkı , Kaplan KAPLAN, ALTUNCU Mehmet Ali, Editor, Iksad Publications, Ankara, pp.103-117, 2023

808D CNC İLE BASKI DEVRE ÇIKARTMA

Kılıç T., ÖZTÜRK S., KANDİLLİ İ., KUNCAN F.
in: MÜHENDİSLİK ALANINDA GÜNCEL ARAŞTIRMALAR, ÖZTÜRK Sıtkı , Kaplan KAPLAN, ALTUNCU Mehmet Ali, Editor, Iksad Publications, Ankara, pp.67-101, 2023

PAKETLEME DENEY DÜZENEĞİNİN S7-1500 PLC İLE KONTROLÜ

ALİZ T., ÖZDEMİR C., ÖZTÜRK S., KANDİLLİ İ.
in: DİSİPLİNLERARASI GÜNCEL MÜHENDİSLİK ÇALIŞMALAR, ERTUNÇ HÜSEYİN METİN, MİNAZ MEHMET RECEP, YILDIRIM BURAK, Editor, Iksad Publications, Ankara, pp.77-105, 2023

CAN HABERLEŞME PROTOKOLÜ STAR AĞ TOPOLOJİSİ

TOP B., ÖZTÜRK S., KANDİLLİ İ., KUNCAN F.
in: DİSİPLİNLERARASI GÜNCEL MÜHENDİSLİK ÇALIŞMALARI, ERTUNÇ HÜSEYİN METİN, MİNAZ MEHMET RECEP, YILDIRIM BURAK, Editor, Iksad Publications, Ankara, pp.107-121, 2023

DC MOTORUN PID ve BULANIK MANTIK İLE KONUM KONTROLÜ

ÖZDEMİR C., ÖZTÜRK S., KANDİLLİ İ.
in: MÜHENDİSLİK ALANINDA TEORİK VE UYGULAMALI ÇALIŞMALAR, KANDİLLİ İsmet, KUNCAN Fatma, Editor, Iksad Publications, Ankara, pp.3-38, 2023

RASPBERRY Pİ İLE DERİN ÖĞRENME TEKNİKLERİNİ KULLANARAK YÜZ TANIMA SİSTEMİ

Aboluhom A. A. A., KANDİLLİ İ.
in: MÜHENDİSLİK ALANINDA TEORİK VE UYGULAMALI ÇALIŞMALAR, KANDİLLİ İsmet, KUNCAN Fatma, Editor, Iksad Publications, Ankara, pp.39-70, 2023
Metrics

Publication

69

Citation (WoS)

35

H-Index (WoS)

4

Citation (Scopus)

46

H-Index (Scopus)

4

Project

1

Thesis Advisory

2

Open Access

8
UN Sustainable Development Goals