Prof. Dr. MURAT MAKARACI

Yayın Ağı

Makaleler 25

1. Towards Optimal Guidance of Autonomous Swarm Drones in Dynamic Constrained Environments

Al-Qadasi Y. S. N., Makaraci M.

EXPERT SYSTEMS , cilt.42, sa.6, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

2. Integration of Robust Control and Multi-Objective Metaheuristic Optimization for Improved Stability and Tracking Performance of WIP Systems

Saleh R. A. A., Al-Qadası Y. S. N., Makaraci M., Metin Ertunc H. M.

OPTIMAL CONTROL APPLICATIONS & METHODS , cilt.46, sa.3, ss.1135-1153, 2025 (SCI-Expanded, Scopus)

3. Structural design optimization and vibration assessment of a base frame for a 3 MW turbo compressor

YARAR E., MAKARACI M., YILMAZ S., Apsar O., Kan E.

SOUND AND VIBRATION , cilt.59, sa.1, 2025 (ESCI)

4. Optimal and robust control methodologies for 4DOF active suspension systems: A comparative study with uncertainty considerations

AL-QADASI Y. S. N., BOLAT F. Ç., MAKARACI M.

Optimal Control Applications and Methods , cilt.46, sa.1, ss.3-27, 2025 (SCI-Expanded, Scopus)

5. UAV swarms: research, challenges, and future directions

Alqudsi Y. S. N., Makaraci M.

JOURNAL OF ENGINEERING AND APPLIED SCIENCE , cilt.72, sa.12, ss.1-24, 2025 (Scopus)

6. Exploring advancements and emerging trends in robotic swarm coordination and control of swarm flying robots: A review

Alqudsi Y. S. N., Makaraci M.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.239, sa.1, ss.180-204, 2025 (SCI-Expanded, Scopus)

7. Experimental study on tribological properties of PTFE and glass reinforced PTFE-C15 for skid transport of heavy structures

Gunes C., MAKARACI M.

MATERIALS RESEARCH EXPRESS , cilt.11, sa.9, 2024 (SCI-Expanded)

8. Unveiling Stress Mitigation and Lifespan Extention Strategies for Spherical Elastomeric Bearings in Aerospace Applications

Makaraci M., Bayraklilar M. S.

STRENGTH OF MATERIALS , cilt.56, sa.4, ss.735-749, 2024 (SCI-Expanded)

9. Experimental and numerical analysis of temperature distributions in SA 387 pressure vessel steel during submerged arc welding

Makaraci M., Senol M. T.

High Temperature Materials and Processes , cilt.43, ss.1-17, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

10. Enhancing aerial robots performance through robust hybrid control and metaheuristic optimization of controller parameters

Alqudsi Y. S. N., Saleh R. A. A., Makaraci M., Ertunç H. M.

NEURAL COMPUTING & APPLICATIONS , cilt.36, sa.1, ss.413-424, 2024 (SCI-Expanded, Scopus)

11. A numerically-stable trajectory generation and optimization algorithm for autonomous quadrotor UAVs

Alqudsi Y. S. N., MAKARACI M., Kassem A., El-Bayoumi G.

Robotics and Autonomous Systems , cilt.170, 2023 (SCI-Expanded, Scopus)

12. Doğu Kaynaklarında Kritik-Analitik Düşünmenin Araştırılması: Klasik Hint Felsefesi ve Mantık Örnekleri

Makaracı M.

Academic Perspective Procedia , cilt.5, sa.1, ss.254-263, 2022 (Hakemli Dergi)

13. Kritik-Analitik Düşünme Eğilimlerini Ölçmeye Yönelik Bütüncül, Basit ve Kapsayıcı Bir Test Önerisi

Makaracı M.

Academic Perspective Procedia , cilt.5, sa.1, ss.264-272, 2022 (Hakemli Dergi)

14. Using group method of data handling (GMDH) neural network to predict the maximum stress on elastomeric layers in spherical elastomeric bearings

KAYA Y., MAKARACI M., Bayraklilar S., KUNCAN M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.36, sa.3, ss.1332-1345, 2021 (SCI-Expanded, Scopus, TRDizin)

15. Design Issues of Buried Piplines at Permanent Ground Deformation Zones

Uçkan M. E., Akbaş B., Kaya E., Çakır F., İpek C., Makaracı M., et al.

DISASTER SCIENCE AND ENGINEERING , cilt.2, sa.2, ss.53-58, 2016 (Hakemli Dergi)

16. Direksiyon Aksonlarının Statik Hasar Analizi

Makaracı M., Demir S., Bahcaci O.

ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCE , cilt.1, sa.2, ss.21-27, 2013 (Hakemli Dergi) Sürdürülebilir Kalkınma

17. Thermomechanical modeling of solder alloy using viscoplasticity theory based on overstress (VBO)

KILAVUZ İ., MAKARACI M.

Energy Education Science and Technology Part A: Energy Science and Research , cilt.30, sa.SPEC .ISS.1, ss.123-130, 2012 (Scopus)

18. SOLUTION FOR FAILURE ANALYSIS OF AUTOMOTIVE AXLE KNUCKLE PULL-OUT

BAYNAL K., Makaracl M., Gulbudak K.

INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY , cilt.11, sa.5, ss.701-710, 2010 (SCI-Expanded, Scopus)

19. Influence of sodium silicate concentration on structural and tribological properties of microarc oxidation coatings on 2017A aluminum alloy substrate

Polat A., MAKARACI M., USTA M.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.504, sa.2, ss.519-526, 2010 (SCI-Expanded, Scopus)

20. Properties of Alumina Coating Formed by Microarc Oxidation Technique on 6061 Aluminum Alloy

Polat A., USTA M., MAKARACI M., Ata A., Tas Z.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.45, sa.12, ss.594-609, 2008 (SCI-Expanded, Scopus)

21. Microstructural and mechanical properties of alumina coatings produced by microarc oxidation technique on 7039 aluminum alloy substrate

Polat A., Baxi J., Kar Y., Usta M., Makaraci M., Liang H., et al.

TMS Annual Meeting , sa.3, ss.211-216, 2008 (Hakemli Dergi)

22. A parametric finite element geometric analysis of a pressurized sphere with cylindrical flush nozzle outlet

Makaraci M.

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME , cilt.127, sa.4, ss.369-372, 2005 (SCI-Expanded, Scopus)

23. Experimental investigation of some parameters on isothermal cyclic fatigue creep behavior of AISI 3137 steel at low homologous regimes

Makaraci M.

JOURNAL OF MATERIALS SCIENCE , cilt.39, sa.7, ss.2577-2579, 2004 (SCI-Expanded)

24. On Finite Element Analysis of a Sİmplified Turbine Blade

Makaracı M.

Mathematical Modelling and Scientific Computing , cilt.10, ss.271-274, 2000 (Düzenli olarak gerçekleştirilen hakemli kongrenin bildiri kitabı)

25. Multi-objective optimization for design and stability of a general control system

MAKARACI M.

Mathematical and Computational Applications , cilt.4, sa.1, ss.153-159, 1999 (Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 31

1. TAKTİK TEKERLEKLİ KARA ARAÇLARINDAKİ BALİSTİK IZGARALAR İÇİN MALZEME SEÇİMİ VE TASARIM YÖNTEMLERİ

Coşkun B., Makaracı M.

EURO ASIA 12.INTERNATIONAL CONGRESS ON APPLIED SCIENCES, 17 - 18 Şubat 2025, ss.20-29, (Tam Metin Bildiri)

2. UZUN NAMLULU SİLAHLARIN 4X4, 6X6 VE 8X8 ARAÇLARDA UYGUN KABİN İÇİ KONUMLANDIRILMASI STANDARTLAR, GÜVENLİK VE ERGONOMİ

Coşkun B., Makaracı M.

EURO ASIA 12th. INTERNATIONAL CONGRESS ON APPLIED SCIENCES, Mingachevir, Azerbaycan, 17 - 18 Şubat 2025, ss.30-42, (Tam Metin Bildiri)

3. Reducing The Carbon Footprint Of Shock Absorber Sub-Part Used In The Automotive Industry

Açıkgöz A., Makaracı M., Ceylan R., Uçakkuş Ö.

7. INTERNATIONAL MARMARA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, İstanbul, Türkiye, 27 - 28 Ocak 2024, ss.1, (Özet Bildiri)

4. Swarm Robotics for Autonomous Aerial Robots: Features, Algorithms, Control Techniques, and Challenges

Al-Qadası Y. S. N., Makaraci M.

4th International Conference on Emerging Smart Technologies and Applications (eSmarTA), Sana´a, Yemen, 6 - 07 Ağustos 2024, ss.393-401, (Tam Metin Bildiri)

5. DİKEY TESTERE PARÇALARININ ALEV PÜSKÜRTME YÖNTEMİ İLE GERİDÖNÜŞÜMÜ

Alirzayeva S., Makaraci M.

AZERBAIJAN INTERNATIONAL CONGRESS OF SCIENTIFIC RESEARCH, Saki, Azerbaycan, 16 Ağustos 2023, ss.127-133, (Tam Metin Bildiri)

6. KALIP ŞEKİLLENDİRME UYGULAMALARINDA MEYDANA GELEN PROBLEMLER, SİMÜLASYON, TASARIMI VE ANALİZ YAKLAŞIMLARI

Palaz C., Makaracı M.

11th INTERNATIONAL CONGRESS ON ENGINEERING, ARCHITECTURE AND DESIGN, İstanbul, Türkiye, 10 - 12 Haziran 2023, ss.1360, (Özet Bildiri)

7. 630 TON SICAK DÖVME MEKANİK PRESİN SERVO DÖNÜŞÜMÜNÜN KİNEMATİK MODELLENMESİ

Makaracı M., Alirzayeva S.

IMASCON 2022-International Marmara Sciences Congress Autumun 2022, Kocaeli, Türkiye, 9 - 10 Aralık 2022, ss.537-544, (Tam Metin Bildiri)

8. MECHANICAL EVALUATION OF CLAVICLE BONE NAIL

Mutlu İ., Doğu Y., Makaracı M.

IMASCON 22-International Marmara Sciences Congress Autumun 2022, Kocaeli, Türkiye, 9 - 10 Aralık 2022, ss.523-530, (Tam Metin Bildiri)

9. TRANSIENT TEMPERATURE DISTRIBUTION ESTIMATION IN SUBMERGED ARC WELDING PROCESS APPLIED TO A387 CHROMIUM-MOLYBDENUM ALLOY STEEL USING GOLDAK’S DOUBLE ELLIPSOIDAL MOVING HEAT SOURCE MODEL

Makaracı M., Şenol M. T.

1ST INTERNATIONAL AZERBAIJAN ACADEMIC RESEARCH CONGRESS, Baku, Azerbaycan, 28 - 29 Mayıs 2022, ss.325-334, (Tam Metin Bildiri)

10. NIP CHARACTERICTICS OF ROLLERS USED IN OPEN END SIZING AND DYEING OF YARNS

Genç E., Makaraci M.

9th INTERNATIONAL ISTANBUL SCIENTIFIC RESEARCH CONGRESS, İstanbul, Türkiye, 14 Mayıs 2022, ss.105, (Özet Bildiri)

11. Deprem etkisi sonucunda gömülü boru hattında oluşan gerilmelerin analizi

Makaracı M., İpek C.

Kocaeli 2015, 5th International Earthquake Symposium, 10 - 12 Haziran 2015, Kocaeli, Türkiye, 10 Haziran 2015, ss.199-212, (Tam Metin Bildiri)

12. Eleştirel Düşünce Ve Eğitim Uygulamaları

Büyükkanber C., Makaracı M.

ISCAT 2015- 1st Symposium on Critical and Analytical Thinking, Sakarya, Türkiye, 10 - 12 Nisan 2015, ss.366-373, (Tam Metin Bildiri)

13. Eleştirel Düşünme İzdüşümü Olarak Medya Okuryazarlığı

Büyükkanber C., Makaracı M.

ISCAT 2015 1st Symposium on Critical and Analytical Thinking, Sakarya, Türkiye, 10 - 12 Nisan 2015, ss.16-23, (Tam Metin Bildiri)

14. CONTACT ANALYSIS OF SLEWING BEARING OF A MID-SIZE WIND TURBINE BY ANALYTICAL AND FINITE ELEMENT APPROACH

Makaracı M., Demir S.

EIGHTEENTH INTERNATIONAL CONFERENCE MECHANICS OF COMPOSITE MATERIALS Devoted to the 50 Anniversary of the Institute of Polymer Mechanics University of Latvia, Riga, Letonya, 02 Haziran 2014, ss.122, (Özet Bildiri)

15. DESIGN OF A MID-SIZE WIND TURBINE HUB-ROTOR-BLADE BEARING SYSTEM UNDER SEVERE LOADING CONDITIONS

Makaracı M., Demir S.

EIGHTEENTH INTERNATIONAL CONFERENCE MECHANICS OF COMPOSITE MATERIALS Devoted to the 50 Anniversary of the Institute of Polymer Mechanics University of Latvia, Riga, Riga, Letonya, 02 Haziran 2014, ss.123, (Özet Bildiri)

16. OPTIMIZATION PARAMETERS OF COLD DRAWING PROCESS FOR SURFACE ROUGHNESS BY TAGUCHI METHOD: A CASE STUDY

Makaracı M.

EIGHTEENTH INTERNATIONAL CONFERENCE MECHANICS OF COMPOSITE MATERIALS Devoted to the 50 Anniversary of the Institute of Polymer Mechanics University of Latvia June 2 – 6, 2014 Riga, Latvia, Riga, Letonya, 02 Haziran 2014, ss.47, (Özet Bildiri)

17. An Overview of Wind Turbine Manufacturing Experience in Turkey

Akşit M. F., Makaracı M.

IRENEC 2011 International 100% Renewable Energy Conference and Exhibition , İstanbul, Türkiye, 06 Ekim 2011, ss.1-7, (Tam Metin Bildiri)

18. Fatigue Design of Horizantal Axis Wind Turbine Rotor Hubs

Makaracı M., Demir S.

1st international 100% renewable energy conference (IRENEC 2011), İstanbul, Türkiye, 6 - 08 Ekim 2011, ss.314-319, (Tam Metin Bildiri)

19. Analysis of the Behavior of an Axially Loaded Cantilevered Rod using Element Free Galerkin Method

Makaracı M., Taner Ö.

ICCES Symposium on Meshless & Other Novel Computational Methods (ICCES MM'11) Karaelmas University, Zonguldak, TURKEY , Zonguldak, Türkiye, 6 - 10 Eylül 2011, ss.1-9, (Tam Metin Bildiri)

20. Kaynak Ağız Formunun Yorulma Dayanımına Etkisinin Sonlu Elemanlar Yöntemiyle İncelenmesi

Makaracı M., Yaman Y.

IMPS 2008 12th International Materials Symposium , Denizli, Türkiye, 15 - 17 Ekim 2008, cilt.1, ss.711-719, (Tam Metin Bildiri)

21. Plastik Enjeksiyon Proses Parametreleri, Simülasyonu ve Bir Lego Parçası İçin Optimum Moldflow Analizleri

Makaracı M., Yıldırım E.

IMPS 2008, 12th International Materials Symposium, Denizli, Türkiye, 15 Ekim 2008, cilt.1, ss.948-956, (Tam Metin Bildiri)

22. Microstructural and mechanical properties of alumina coatings produced by microarc oxidation technique on 7039 aluminum alloy substrate

Polat A., Baxi J., Kar Y., USTA M., MAKARACI M., Liang H., et al.

137th Annual Meeting and Exhibition of the Minerals-Metals-and-Materials-Society, Louisiana, Amerika Birleşik Devletleri, 9 - 13 Mart 2008, ss.211-212, (Tam Metin Bildiri)

23. 6061 Alüminyum Alaşımının Mikroark Oksidasyon Yöntemiyle Yüzey Kaplanması

Polat A., Usta M., Makaracı M., Aytaç A.

TALSAD-2008 III. Ulusal Alüminyum Sempozyumu, Kocaeli, Türkiye, 16 - 17 Kasım 2007, sa.28, ss.1-5, (Tam Metin Bildiri)

24. An Efficient Novel Augmented Continuum Material Tangent Operator for Nonlinear Elasto-Visco-Plastic Deformations

Makaracı M.

7th International Fracture Conference, Kocaeli, Türkiye, 19 - 21 Ekim 2005, cilt.2, ss.991-998, (Tam Metin Bildiri)

25. Aşırı Gerilme Esaslı Viskoplastisite Teorisinin Termomekanik Simülasyonu

Makaracı M., Kılavuz İ.

7th International Fracture Conference , Kocaeli, Türkiye, 19 - 21 Ekim 2005, cilt.1, ss.171-181, (Tam Metin Bildiri)

26. Finite Element Implementation of an Isotropic Unified Viscoplastic Model and Applications to Alloys at High Homologous Temperature Deformations

Makaracı M.

7th International Fracture Conference, Kocaeli, Türkiye, 19 - 21 Ekim 2005, cilt.2, ss.953-959, (Tam Metin Bildiri)

27. Biomechanic Modeling and Deformation Analysis of Lower Cervical Spine Under Compression And Flexion Moment Using Finite Element Method

Makaracı M., Aksakal İ. Ç.

7th International Fracture Conference, Kocaeli, Türkiye, 19 Ekim 2005, cilt.1, ss.183-189, (Tam Metin Bildiri)

28. A Stable Time Integration Scheme for a Unified Inelastic Deformation Model Applied to Near-Eutectic Solder Alloy

Makaracı M.

1st Int. Cappadocia Mechanical Engineering Symposium , Nevşehir, Türkiye, 14 - 16 Temmuz 2004, cilt.3, ss.677-683, (Tam Metin Bildiri)

29. Inelastic Deformation of Thick Wall Cylinders via Materially Nonlinear State Variables Embedded into Finite Element Method

Makaracı M.

CMES 04 The First Cappadocia Mechanical Engineering Symposium, Nevşehir, Türkiye, 14 Temmuz 2004, cilt.3, ss.819-825, (Tam Metin Bildiri)

30. On Finite Element Modal Analysis of a Simplified Turbine Blade

Makaracı M.

12th Int. Conference on Mathematical Modelling and Scientific Computing, Illinois, Amerika Birleşik Devletleri, 1 - 05 Ağustos 1999, ss.271-274, (Tam Metin Bildiri)

31. A multi-objective design optimization procedure for a general control system

Makaraci M.

7th International Conference and Exposition on Engineering, Construction, Operations, and Business in Space, New Mexico, Amerika Birleşik Devletleri, 27 Şubat - 02 Mart 2000, ss.377-383, (Tam Metin Bildiri)

Kitaplar 12

Diğer Yayınlar 1

1. A Finite Element, Implicit Backward Euler Time Integration for the Viscoplasticity Theory Based on Overstress

Makaracı M.

Diğer, ss.1-300, 2001

Yayınlar & Eserler