Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Evaluation of graphene oxide-doped poly-lactic-co-glycolic acid (GO-PLGA) nanofiber absorbable plates and titanium plates for bone stability and healing in mandibular corpus fractures: An experimental study

Uslu C., Tatar B. E., UYANIKGİL Y., Tomruk C., Yılmaz B., DEMİRKOL N., et al.
Journal of Plastic, Reconstructive and Aesthetic Surgery , cilt.92, ss.79-86, 2024 (SCI-Expanded) identifier identifier

Biological and Morphological Effects of Apatite Kinds (Sheep/Synthetic) on MgO Reinforced Bone Tissue with Hydroxyapatite Matrix

Akıllı A., Evlen H., Demirkol N.
ACTA PHYSICA POLONICA A , cilt.141, sa.6, ss.67-77, 2022 (SCI-Expanded)

Technological and physical properties of dry pressed red mud bodies containing chamotte

DEMİRKOL N.
ARABIAN JOURNAL OF GEOSCIENCES , cilt.12, sa.9, 2019 (SCI-Expanded) identifier identifier

Production and characterization of ceramic materials in three-dimensional printer

EVLEN H., Caliskan A., DEMİRKOL N.
ARABIAN JOURNAL OF GEOSCIENCES , cilt.11, sa.16, 2018 (SCI-Expanded) identifier identifier

Bioactivity Properties and Characterization of Commercial Synthetic Hydroxyapatite-5 wt.% Niobium (V) Oxide-5 wt.% Magnesium Oxide Composite

DEMİRKOL N.
ACTA PHYSICA POLONICA A , cilt.132, sa.3, ss.786-788, 2017 (SCI-Expanded) identifier identifier

Comparison of Microstructural and Mechanical Properties of Hydroxyapatite-Al2O3 Composites with Commercial Inert Glass (CIG) Addition

Bulut B., DEMİRKOL N., ERKMEN Z. E., Kayali E. S.
ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1094-1096, 2015 (SCI-Expanded) identifier identifier

Influence of Commercial Inert Glass Addition on the Mechanical Properties of Commercial Synthetic Hydroxyapatite

DEMİRKOL N., OKTAR F. N., Kayali E. S.
ACTA PHYSICA POLONICA A , cilt.123, sa.2, ss.427-429, 2013 (SCI-Expanded) identifier identifier

Mechanical and Microstructural Properties of Sheep Hydroxyapatite (SHA)-Niobium Oxide Composites

DEMİRKOL N., OKTAR F. N., Kayali E. S.
ACTA PHYSICA POLONICA A , cilt.121, sa.1, ss.274-276, 2012 (SCI-Expanded) identifier identifier

Hydroxyapatite Nano Barium Strontium Titaniumoxide Composites

DEMİRKOL N., KAYALI E. S., YETMEZ M., OKTAR F. N., SİMEON A.
Key Engineering Materials , cilt.484, ss.204-209, 2011 (SCI-Expanded) identifier identifier

Mechanical properties of bovine hydroxyapatite (BHA) composites doped with SiO2, MgO, Al2O3, and ZrO2

Oktar F. N., Agathopoulos S., Ozyegin L. S., Gündüz O., Demirkol N., Bozkurt Y., et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE , cilt.18, sa.11, ss.2137-2143, 2007 (SCI-Expanded) identifier identifier identifier

A new porcelainised stoneware material based on anorthite

Taskiran M., Demirkol N., ÇAPOĞLU A.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY , cilt.25, sa.4, ss.293-300, 2005 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Atık Porselenlerden İleri Dönüşüm Çalışmalar

DEMİRKOL N.
Journal of Turkish Ceramic Society , cilt.1, sa.64, ss.110-114, 2023 (Hakemli Dergi)

Influence of Nanometric Zinc Oxide and Commercial Inert Glass Additions on the Mechanical and Bioactivity Properties of Nano Hydroxyapatite Biocomposites.

Yildirim B., DEMİRKOL N.
Advanced Nano-Bio-Materials and Devices , cilt.6, sa.4, ss.694-699, 2022 (Hakemli Dergi)

Comparison of mechanical and bioactivity properties of nano hydroxyapatite-magnesium oxide and nano hydroxyapatite-niobium (V) oxide biocomposites

TURAN M., DEMİRKOL N.
Advanced Nano-Bio-Materials and Devices , cilt.3, sa.4, ss.521-527, 2019 (Hakemli Dergi)

Slip Dökümle Üretilmiş Yunan Kırmızı Çamur Bünyelerin Sinterleme Özellikleri

DEMİRKOL N., Samancı v.
Nevşehir Bilim ve Teknoloji Dergisi , cilt.8, ss.71-77, 2019 (Hakemli Dergi)

Microstructural and Mechanical Properties of Nano Hydroxyapatite-Magnesium Oxide Biocomposites

Turan M., Demirkol N.
Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.19, ss.483-487, 2019 (Scopus) Creative Commons License identifier identifier

Production and characterization of ternary sheep hydroxyapatite (SHA)-wollastonite (W)-commercial inert glass (CIG) biocomposite

DEMİRKOL N., TURAN M.
Research on Engineering Structures Materials , cilt.5, sa.2, ss.167-174, 2019 (Hakemli Dergi)

Sintering and Technological Properties of Dry Pressed Ceramic Body Containing Kastamonu Mud and Clay

DEMİRKOL N.
Avrupa Bilim ve Teknoloji Dergisi , cilt.43603, sa.15, ss.499-504, 2019 (Hakemli Dergi) Creative Commons License

A New Ceramic Raw Material: Kastamonu Mud

DEMİRKOL N., YAVUZ P., YILMAZ O.
Journal of Turkish Ceramic Federation , cilt.52, ss.114-119, 2017 (Hakemli Dergi)

Hidroksiapatit Volastonit Titanya Kompozitlerin Fiziksel ve Mekanik Özellikleri

DEMİRKOL N.
Türkiye Seramik Federasyonu Dergisi , ss.102-109, 2016 (Hakemli Dergi)

5 Uluslararası Gölcük Seramik Sempozyumu

DEMİRKOL N.
Journal of Turkish Ceramic Federation , sa.48, ss.64-66, 2015 (Hakemli Dergi)

Production and Characterization of Vitrified Ceramics Containing High Plasticity Clay

MÜGE i., DEMİRKOL N.
Journal of Turkish Ceramic Federation , ss.104-112, 2015 (Hakemli Dergi)

Microstrctural and Mechanical Properties of Zirconia Silica Hydroxyapatite Composite for Biomedical Applications

ARABACI A., YÜKSEL N., DEMİRKOL N.
Key Engineering Materials , cilt.631, ss.156-159, 2015 (Scopus)

Characterization and Bioactivity of Hydroxyapatite ZrO2 Composites with Commercial Inert Glass CIG Addition

BERRAK B., DEMİRKOL N., ERKMEN Z. E., KAYALI E. S.
EURO CERAMICS VIII, PTS 1-3 , cilt.631, ss.166-172, 2015 (Hakemli Dergi)

Production and Mechanical Properties of Commercial Synthetic Hydroxyapatite (CSHA) Composites

DEMİRKOL N., OKTAR F. N., KAYALI E. S.
EURO CERAMICS VIII, PTS 1-3 , cilt.587, ss.147-153, 2014 (Hakemli Dergi) identifier identifier

Effect of Commercial Inert Glass CIG Addition on Mechanical andMicrostructural Properties of vChicken Hydroxyapatite CHA

DEMİRKOL N., ORAL A. Y., OKTAR F. N., KAYALI E. S.
Key Engineering Materials , cilt.587, ss.33-38, 2014 (Scopus)

Influence of Niobium Oxide on the Mechanical Properties of Hydroxyapatite

DEMİRKOL N., OKTAR F. N., KAYALI E. S.
EURO CERAMICS VIII, PTS 1-3 , cilt.529, ss.29-33, 2013 (Hakemli Dergi) identifier identifier

Nano bioceramic production via mechano chemical conversion (ultrasonication)

OKTAR F. N., Agathopoulos S., özyeğin l. s., turner I., GÜNDÜZ O., DEMİRKOL N., et al.
Key Engineering Materials , cilt.529, sa.530, ss.609-614, 2013 (Scopus)

Comparison of Mechanical Properties of Sheep Hydroxyapatite (SHA) and Commercial Synthetic Hydroxyapatite (CSHA) MgO Composites

DEMİRKOL N., OKTAR F. N., KAYALI E. S.
KEY ENGINEERING MATERIALS , cilt.493, sa.494, ss.588-593, 2012 (Scopus)

Dental Porselen Bağlayıcıları ve TurkaForm

özyeğin l. s., DEMİRKOL N.
Diş Teknisyenliği Dergisi , sa.20, ss.46-49, 2008 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Şile Kaolenlerinin Artistik Seramik Çamur Reçetelerinde Kullanılabilirliğinin Araştırılması

DEMİRKOL N.
19. Ulusal Kil Sempozyumu, Eskişehir, Türkiye, 6 - 09 Eylül 2023

Farklı Şekillendirme Tekniklerine Uygun Yeni Porselen Bünyelerin Geliştirilmesi ve Karakterizasyonu

Öztorun M., DEMİRKOL N.
II. Uluslararası Sanat Sempozyumu, Kocaeli, Türkiye, 08 Mayıs 2023, cilt.1, ss.1044-1054

Yeşil Prosesle Üretilmiş Hidroksiapatit Esaslı MgO Katkılı Hibrit Kompozitlerin İndüksiyonla Sinterlenmesi ve Karakterizasyonu

Usta E. N., DEMİRKOL N.
IMASCON 2023, Kocaeli, Türkiye, 09 Haziran 2023

Behavior of some ceramic materials against gamma ray with 662 keV energy

ALNASER M. A., GÜNOĞLU K., DEMİRKOL N., AKKURT İ.
ICCESEN 2021, Türkiye, 27 Ekim 2021

The Use of Ceramic and Glass Waste in the Public Area and Başiskele Municipality Zero Waste

DEMİRKOL N., Özlü M. Y.
SERES 2021, V. ULUSLARARASI SERAMİK, CAM, EMAYE, SIR VE BOYA KONGRESİ, Eskişehir, Türkiye, 13 Ekim 2021

Kil Bağlayıcılı Yalıtım Özellikli Kompozit Malzeme Üretiminde Bağlayıcı Miktarı ve Sıcaklığın Basınç Dayanımı Üzerine Etkisi

Başgedik G. E., DEMİRKOL N., YILDIRIM S. T.
SERES 2021, V. ULUSLARARASI SERAMİK, CAM, EMAYE, SIR VE BOYA KONGRESİ, Eskişehir, Türkiye, 13 Ekim 2021

Mechanical and bioactive behaviour of hydroxyapatite-niobium (V) oxide nano composites

TURAN M., DEMİRKOL N.
24th International Biomedical ScienceTechnology Symposium, BIOMED 2019, İzmir, Türkiye, 17 - 20 Ekim 2019

Sintering Properties of Slip Casted Greek Red Mud Bodies

DEMİRKOL N., Samancı Peksezer V.
IMSMATEC 2019, Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.1197-1200

Sintering and Technological Properties of Greek Red Mud Bodies

DEMİRKOL N., Samancı Peksezer V.
Uluslararası Marmara Fen ve Sosyal Bilimler Kongresi (BAHAR 2019), IMASCONGRESS, Kocaeli, Türkiye, 26 - 28 Nisan 2019, ss.161

Atık Mermer Bulamacının Artistik Sırlarda Kullanımı

DEMİRKOL N.
1. Anadolu Uluslararası Multidisipliner Çalışmalar Kongresi, Diyarbakır, Türkiye, 28 - 29 Aralık 2018, ss.412

Seramik Oksit Katkılı Doğal ve Sentetik Hidroksiapatitlerin Üretimi ve Karakterizasyonu

DEMİRKOL N.
23. Biyomedikal Teknolojiler ve Biyomalzeme Sempozyumu, İstanbul, Türkiye, 15 - 16 Aralık 2018, cilt.1

Production and Characterization of Hydroxyapatite Wollastonite Magnesia Biocomposite

DEMİRKOL N.
4th International Symposium on Composite Materials (KOMPEGE2018), İzmir, Türkiye, 6 - 08 Eylül 2018, ss.161

Strategic Approach For Industry 4.0

BEGEÇ S., DEMİRKOL N.
4th International Symposium On Multidisiplinary Studies (ISMS), Paris, Fransa, 26 - 27 Nisan 2018, ss.223

Mechanical Properties of Ternary Sheep Hydroxyapatite (SHA)-Wollastonite-Commercial Inert Glass (CIG) Biocomposite

TURAN M., DEMİRKOL N.
1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, ss.482

Fabrication and Characterization of TernaryHydroxyapatite-Wollastonite-Commercial Inert Glass Biocomposite

DEMİRKOL N.
International Conference on Nutraceuticals-ConceptsApplications in Diseases (ICNCAD 2018), Chennai, Hindistan, 16 - 17 Şubat 2018, ss.60

The Effects of Clay Addition on the Technological and Mechanical Properties of Kastamonu Mud

DEMİRKOL N.
1st International Conference on Arts, ScienceTechnology, 20 - 22 Aralık 2017, ss.62

Linear Attenuation Coefficients of Some Ceramic Samples

JAWAD A. A., DEMİRKOL N., GÜNOĞLU K., AKKURT İ.
ICCESEN 2017, Antalya, Türkiye, 4 - 08 Ekim 2017

Production and Characterization of Ceramic Materials in Three Dimensional Printer

EVLEN H., DEMİRKOL N., Çalışkan A.
4th International Conference on Computational And Experimental Science and Engineering, ICCESEN 2017, 4 - 08 Ekim 2017, ss.743

Technological and Physical Properties of Dry Pressed Red Mud Bodies Containing Chamotte

DEMİRKOL N.
4th International Conference on Computational And Experimental Science and Engineering, ICCESEN 2017, 4 - 08 Ekim 2017, ss.646

SERAMİK MALZEMELER İÇİN ÜÇ BOYUTLU YAZICI TASARIMI, İMALATI VE YAZDIRMA PARAMETRELERİNİN ETKİSİNİN İNCELENMESİ

EVLEN H., ÇALIŞKAN A., DEMİRKOL N.
4TH INTERNATIONAL CONFERANS ON COMPUTATIONAL AND EXPERIMENTAL SCINECE AND ENGINEERING, 4 - 07 Ekim 2017

Shaping By Dry Pressing and Characterization of Kınık (Pazaryeri-Bilecik) Red Mud

DEMİRKOL N.
International Conference on Advances in Science, ICAS 2017, 13 - 15 Eylül 2017

Influence of Chamotte Addition on the Physical and Mechanical Properties of Red Mud Bodies

DEMİRKOL N., TİR E., KESKİN E.
15th ConferenceExhibition of the European Ceramic Society, 09 Temmuz 2017 - 13 Temmuz 2016

3D Bioprinting of a Natural Polymer-Ceramic based composite Bio-Ink for Bone Tissue Engineering Applications

AYDIN L., DEMİRKOL N., KENAR H.
2nd International Symposium on 3D Printing Technologies (3D-PTS2017), 3 - 04 Nisan 2017

The Effects of Different Clay Types on the Mechanical and Physical Properties of Vitrified Ceramic Bodies

DEMİRKOL N.
International Conference on Advances in Science and Arts, İstanbul, Türkiye, 29 - 31 Mart 2017

Production and Mechanical Characterization of Commercial Synthetic Hydroxyapatite Niobium V Oxide Magnesium Oxide Composite

DEMİRKOL N.
18th International Metallurgy and Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016

Bioactivity Properties and Characterization of Commercial Synthetic Hydroxyapatite Niobium V Oxide Magnesium Oxide Composites

DEMİRKOL N.
3rd International Conference on Computational And Experimental Science and Engineering (ICCESEN 2016), Antalya, Türkiye, 19 - 24 Ekim 2016, cilt.1, ss.620

Influence of Titania on the Bioactivity and Mechanical Properties of Hydroxyapatite Wollastonite Magnesia Composites

DEMİRKOL N.
Sixth International Conference on Shaping of Advanced Ceramics, Montpellier, Fransa, 18 - 20 Temmuz 2016, ss.204

SİNTERLEME SICAKLIGININ YÜKSEK PALSTİSİTEYE SAHİP KİL İÇEREN ÇİNİ BÜNYELERİN FİZİKSEL VE MEKANİK ÖZELLİKLERİ ÜZERİNDEKİ ETKİSİ

KARADENİZ P. G., DEMİRKOL N.
İNTERNATİONAL CONFERENCE ON MATERİAL SCİENCE AND TECHNOLOGY İN CAPPADOCİA, 6 - 08 Nisan 2016

SİNTERLEME SICAKLIGININ YÜKSEK PLASTİSİYE SAHİP KİL İÇEREN ÇİNİ BÜNYELERİN FİZİKSEL VE MEKANİK ÖZELLİKLERİ ÜZERİNDEKİ ETKİSİ

KARADENİZ P. G., DEMİRKOL N.
INTERNATİONAL CONFERENCE ON MATERİAL SCİENCE AND TECHNOLOGY İN CAPPADOCİA, 6 - 08 Nisan 2016

Effect of Sintering Temperature on the Physical and Mechanical Properties of Tile Bodies Containing High Plasticity Clay

KARADENİZ P. G., DEMİRKOL N.
IMSTEC 2016, Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.605-608

Bioactivity and Mechanical Properties of Hydroxyapatite Wollastonite Titania Composites

DEMİRKOL N.
9.Uluslararası Katılımlı Seramik Kongresi, Afyon, Türkiye, 26 - 28 Kasım 2015, ss.80

Hidroksiapatit Volastonit Magnezya Kompozit Biyoseramiklerin Üretimi ve Karakterizasyonu

DEMİRKOL N.
Uluslararası Katılımlı III.Ege Kompozit Malzemeler Sempozyumu, Aydın, Türkiye, 5 - 07 Kasım 2015, cilt.1, ss.246-248

Production and Characterization of Vitrified Ceramics Containig High Plasticity Clay

DEMİRKOL N., Müge İ.
14th International Conference European Ceramic Society, Toledo, Filipinler, 21 - 25 Haziran 2015

Mechanical Properties and Bioactivity of Natural Hydroxyapatite Composites

DEMİRKOL N.
EMN Biomaterials Meeting, Pekin, Çin, 10 - 15 Nisan 2015, ss.14

Effects of Commercial Inert Glass (CIG) Addition on Mechanical and Microstructural Properties of Chicken Hydroxyapatite (CHA)

DEMİRKOL N., ORAL A. Y., OKTAR F. N., Kayali E. S.
25th Symposium and Annual Meeting of the International-Society-for-Ceramics-in-Medicine (ISCM), Bucharest, Romanya, 7 - 10 Kasım 2013, cilt.587, ss.33-34 identifier identifier

Comparison of Microstructural and Mechanical Properties of Hydroxyapatite-ZrO2 Composites with Commercial Inert Glass Addition

Bulut B., DEMİRKOL N., ERKMEN Z. E., Kayali E. S.
1st International Multidisciplinary Microscopy Congress (INTERM), Antalya, Türkiye, 10 - 13 Ekim 2013, cilt.154, ss.241-246 identifier identifier

Microstructural, Mechanical and Chemical Properties of Commercial Synthetic Hydroxyapatite (CSHA)-Magnesium Fluoride (MgF2) Composites

DEMİRKOL N., YETMEZ M., KALKANDELEN C., ALKAN M., OKTAR F. N., KAYALI E. S.
International Multidisciplinary Microscopy Congress INTERM 2013, Antalya, Türkiye, 10 - 13 Ekim 2013, ss.69

Mechanical Properties and Bioactivity of Bovine Hydroxyapatite (bha)-Nano Barium Strontium Titanium Oxide (Nano BST) Composites

DEMİRKOL N., OKTAR F. N., KAYALI E. S.
13th Conference of the European Ceramic Society, Limoges, Fransa, 23 - 27 Haziran 2013, ss.292

Production and Characterization of Sheep Hydroxyapatite (SHA) and Commercial Synthetic Hydroxyapatite (CSHA) Composites

DEMİRKOL N., OKTAR F. N., KAYALI E. S.
3rd International Advances in Applied PhysicsMaterials Science Congress, Antalya, Türkiye, 24 - 28 Nisan 2013, ss.12

Nano-Bioceramic Production via Mechano-Chemical Conversion (Ultrasonication)

OKTAR F. N., DEMİRKOL N., GÜNDÜZ O., SAMUR R., KAYALI E. S.
BİOCERAMİCS 24, 21 - 24 Ekim 2012, cilt.529, ss.609-614

Microstructural and mechanical study of commercial synthetic hydroxyapatite (CSHA) -lantanium (III) oxide composites

DEMİRKOL N., PAZARLIOĞLU S. S., SALMAN S., KAYALI E. S., OKTAR F. N.
APMAS 2012, Antalya, Türkiye, 26 - 29 Nisan 2012, ss.298

Rheological and Mechanical Properties of Vitrified Ceramics Containing High Plasticity

ipek M., DEMİRKOL N.
3rd International Advances in Applied Physics Materials Science Congress, Antalya, Türkiye, 24 - 28 Nisan 2013, ss.384

Sheep hydroxyapatite (SHA)-commercial inert glass (CIG) composites

DEMİRKOL N., OKTAR F. N., KAYALI E. S.
TMS 2012 141st Annual MeetingExhibition, Florida, Amerika Birleşik Devletleri, 11 - 15 Mart 2012, ss.150

Microstructure and Mechanical Properties of Sheep Hydroxypapatite (SHA) Composites

DEMİRKOL N., OKTAR F. N., KAYALI E. S.
12th Conference of the European Ceramic Society, ECerS 2011, Stockholm, İsveç, 19 - 23 Haziran 2011

Mechanical and Microstructural Properties of Sheep Hydroxyapatite (SHA) -Niobium Oxide Composites

DEMİRKOL N., OKTAR F. N., KAYALI E. S.
Applied Physics and Materials Science International Congress, Antalya, Türkiye, 12 - 15 Mayıs 2011, cilt.2, ss.515

Mechanical Properties of Bovine Enamel Derived Hydroxyapatite

DEMİRKOL N., YETMEZ M., Karacayli U., KAYALI E. S., GÜNDÜZ O., Agathopoulos S., et al.
XXXVII Annual ESAO Congress, Üsküp, Makedonya, 8 - 11 Eylül 2010, cilt.33, ss.468

Mechanical Properties of Hydroxyapatite-Tantalum Composites

YETMEZ M., DEMİRKOL N., OKTAR F. N., GÜNDÜZ O., KAYALI E. S., Agathopoulos S.
XXXVII Annual ESAO Congress, ÜSKÜP, Makedonya, 8 - 11 Eylül 2010, cilt.33, ss.467

A New Safe Method to produce bioceramic nano-powders from nacre venus verrucosa

OKTAR F. N., Tuyel U., DEMİRKOL N., GÜNDÜZ O., SAMUR R., kannan s.
XXXVII. Annual ESAO Congress, Üsküp, Makedonya, 8 - 11 Eylül 2010, cilt.33, ss.467

A New Source for Natural Ceramics Chicken Bone Hydroxyapatite CHA

Karacayli U., OKTAR F. N., DEMİRKOL N., özyeğin l. s., GÜNDÜZ O., Agathopoulos S.
4 th National Conference of the Hellenic Society of Biomechanics Abstract Book, Ioannina, Yunanistan, 4 - 06 Haziran 2010

Rheological and Green Strength Behaviour of Low clay Translucent Whiteware Slurries with an Acrylic Type Emulsion Binder Addition

DEMİRKOL N., ÇAPOĞLU A.
1Oth European Ceramic Congress and Exhibition, Berlin, Almanya, 17 - 21 Haziran 2017, ss.434

Effect of using organic binders on the green strength behaviour of low-clay containing whiteware

DEMİRKOL N., ÇAPOĞLU A.
Fourth International Conference on Inorganic Materials, Antwerp, Belçika, 19 - 21 Eylül 2004, ss.223

Effect of milling quartz prior to adding in to anorthite based porcelainised stoneware on strength

DEMİRKOL N., Taşkıran U., ÇAPOĞLU A.
Fourth International Conference on Inorganic Materials, Antwerp, Belçika, 19 - 21 Eylül 2004, ss.349

Kitap & Kitap Bölümleri

The Use of 3d Printing Technology in Ceramic Art

DEMİRKOL N.
Contemporary Art Studies, Önder Yağmur, Editör, Detay Yayıncılık, Ankara, ss.247-261, 2020

Koyun Hidroksiapatit Esaslı Kompozitlerin Üretimi ve Karakterizasyonu

DEMİRKOL N.
Yalın Yayıncılık, İstanbul, 2016

Metrikler

Yayın

84

Atıf (WoS)

183

H-İndeks (WoS)

6

Atıf (Scopus)

223

H-İndeks (Scopus)

6

Proje

8

Tez Danışmanlığı

3

Açık Erişim

3
BM Sürdürülebilir Kalkınma Amaçları