Metrikler
Yayın
65
Açık Erişim
3
BM Sürdürülebilir Kalkınma Amaçları
Eğitim Bilgileri
2013 - 2020
2013 - 2020Doktora
Kocaeli Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Anabilim Dalı, Türkiye
2010 - 2013
2010 - 2013Yüksek Lisans
Kocaeli Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Anabilim Dalı, Türkiye
2007 - 2012
2007 - 2012Lisans
Anadolu Üniversitesi, İşletme Fakültesi (Açıköğretim), İşletme Pr. (Açıköğretim), Türkiye
2006 - 2010
2006 - 2010Lisans
Kocaeli Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Türkiye
Yaptığı Tezler
2020
2020Doktora
Termoplastik poliester elastomer matrisli kompozitlerin tribolojik ve mekanik özelliklerinin elyaf ve partikül takviye malzemeleri varlığında iyileştirilmesi
Kocaeli Üniversitesi, Fen Bilimleri Enstitüsü, Makina Mühendisliği Bölümü
2013
2013Yüksek Lisans
Plazma nitrürlenmiş Ti-6Al-4V alaşımının adhezif aşınma özelliklerinin incelenmesi 
Kocaeli Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Anabilim Dalı
Yabancı Diller
B2 Orta Üstü
B2 Orta Üstüİngilizce
Araştırma Alanları
Mühendislik ve Teknoloji
Akademik Ünvanlar / Görevler
2022 - Devam Ediyor
2022 - Devam EdiyorDr. Öğr. Üyesi
Kocaeli Üniversitesi, Mühendislik Fakültesi, Makina Mühendisliği
2011 - 2022
2011 - 2022Araştırma Görevlisi
Kocaeli Üniversitesi, Mühendislik Fakültesi, Makina Mühendisliği
Makaleler
Tümü (16)
SCI-E, SSCI, AHCI (14)
SCI-E, SSCI, AHCI, ESCI (15)
ESCI (1)
Scopus (15)
Diğer Yayınlar (1)
2025
20251. Performance evaluation of boron-based particles as filler for thermoplastic polyester elastomer
GÜL O., KARSLI YILMAZ N. G., Gul C., DURMUŞ A., YILMAZ T.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
, cilt.38, sa.10, ss.3718-3738, 2025 (SCI-Expanded, Scopus)
2025
20252. Investigation of the effects of salt remelting treatment on the tensile, flexure, hardness and adhesive wear behavior of 3D-printed PET
GÜL O., EYRİ B., KARSLI YILMAZ N. G., YILMAZ T.
PROGRESS IN ADDITIVE MANUFACTURING
, 2025 (ESCI)
2025
20253. Modeling short fiber reinforced polymer matrix composite materials using material designer
Eyri B., Gul O., Karsli N. G., Yilmaz T.
POLYMER COMPOSITES
, cilt.46, sa.11, ss.10350-10360, 2025 (SCI-Expanded)
2025
20254. Study of the Thermal and Hydrothermal Aging Effects on the Properties of 3D-Printed Thermoplastic Polyurethane
EYRİ B., GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY
, 2025 (SCI-Expanded)
2025
20255. Characterization of ABS/PETG multi-material composites 3D printed by print-pause-print method
EYRİ B., GÜL O., YILMAZ S., KARSLI YILMAZ N. G., YILMAZ T.
POLYMER ENGINEERING AND SCIENCE
, 2025 (SCI-Expanded, Scopus)
2024
20246. Study of the effect of hexagonal boron nitride addition to thermoplastic polyester elastomer composites reinforced with carbon, glass and basalt fibers
Gül O., Karslı Yılmaz N. G., Gul C., Durmuş A., Yılmaz T.
POLYMER BULLETIN
, cilt.81, sa.17, ss.16219-16239, 2024 (SCI-Expanded, Scopus)
2024
20247. Analyzing the Influence of Multimaterial 3D Printing and Postprocessing on Mechanical and Tribological Characteristics
Yılmaz S., Okan Gul O., Eyri B., Karsli N. G., Yilmaz T.
MACROMOLECULAR MATERIALS AND ENGINEERING
, cilt.309, sa.5, 2024 (SCI-Expanded, Scopus)
2024
20248. Investigation of the influence of salt remelting process on the mechanical, tribological, and thermal properties of 3D-printed poly(lactic acid) materials
Yılmaz S., Eyri B., Gül O., Karslı Yılmaz N. G., Yılmaz T.
POLYMER ENGINEERING AND SCIENCE
, cilt.64, sa.1, ss.17-30, 2024 (SCI-Expanded, Scopus)
2023
20239. Comprehensive characterization of 3D-printed bamboo/poly(lactic acid) bio composites
Yılmaz S., Gül O., Eyri B., Karslı Yılmaz N. G., Yılmaz T.
Polymer Engineering and Science , cilt.63, sa.9, ss.2958-2972, 2023 (Hakemli Dergi)
2023
202310. Investigation of the effect of zeolite, bentonite, and basalt fiber as natural reinforcing materials on the material properties of PPS and CF-reinforced PPS
Kizil A., Dincer U., Yilmaz S., Gul O., Karslı Yılmaz N. G., Yilmaz T.
POLYMER ENGINEERING AND SCIENCE
, cilt.63, sa.4, ss.1314-1322, 2023 (SCI-Expanded, Scopus)
2022
202211. Properties of compatibilized rPET/PC Blends with epoxy based Chain Extender
Yılmaz S., Gul O., Yilmaz N. G., Yilmaz T.
KGK-KAUTSCHUK GUMMI KUNSTSTOFFE
, sa.4, ss.62-67, 2022 (SCI-Expanded)
2022
202212. Investigation of the Synergistic Effect of Addition the Hybrid Carbon Fiber, Graphene Nanoplatelet and Matrix Modifier to Poly(phenylene sulphide) on Physical Properties
Karslı Yılmaz N. G., Gül O., Yılmaz T.
FIBERS AND POLYMERS
, cilt.23, sa.4, ss.1059-1067, 2022 (SCI-Expanded, Scopus)
2019
201913. Synergetic effect of graphene nanoplatelet, carbon fiber and coupling agent addition on the tribological, mechanical and thermal properties of polyamide 6,6 composites
Karatas E., Gül O., Karsli N. G., Yılmaz T.
COMPOSITES PART B-ENGINEERING
, cilt.163, ss.730-739, 2019 (SCI-Expanded, Scopus)
2018
201814. Effects of coupling agent addition on the adhesive wear, frictional and thermal properties of glass fiber-reinforced polyamide 6,6 composites
Karslı Yılmaz N. G., Yılmaz T., Gül O.
POLYMER BULLETIN
, cilt.75, sa.10, ss.4429-4444, 2018 (SCI-Expanded, Scopus)
2015
201515. Effect of CBC and G-POSS on Tribological Behaviour of Polyamide 6 and Short Glass Fiber Reinforced Polyamide 6 Composites
Gül O., Yılmaz S., Yılmaz T.
ACTA PHYSICA POLONICA A
, cilt.127, sa.4, ss.1121-1123, 2015 (SCI-Expanded, Scopus)
2014
201416. The Effect of Low Temperature Plasma Nitriding on Wear Resistance of Ti6Al4V Alloy
GÜL O., SARI N. Y., SINMAZÇELİK T.
ACTA PHYSICA POLONICA A
, cilt.125, sa.2, ss.491-493, 2014 (SCI-Expanded)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler
2023
20231. Analysis of The Mechanical Properties of Inconel 718
Korkmaz Ç., Gül O.
5th International Conference on Applied Engineering and Natural Sciences (ICAENS 2023), Konya, Türkiye, 10 - 12 Temmuz 2023, ss.673-678, (Tam Metin Bildiri)
2023
20232. Stress Analysis of Belt Conveyor Roller Tube
Düzenli A., Gül O.
5th International Conference on Applied Engineering and Natural Sciences (ICAENS 2023), Konya, Türkiye, 10 - 12 Temmuz 2023, ss.659-663, (Tam Metin Bildiri)
2023
20233. Office Seat Design and Analysis
Yaltıraklı M. B., Gül O.
5th International Conference on Applied Engineering and Natural Sciences (ICAENS 2023), Konya, Türkiye, 10 - 12 Temmuz 2023, ss.900-906, (Tam Metin Bildiri)
2023
20234. Bicycle Frame Design and Structural Analysis
İnce K., Gül O.
5th International Conference on Applied Engineering and Natural Sciences (ICAENS 2023), Konya, Türkiye, 10 - 12 Temmuz 2023, ss.688-691, (Tam Metin Bildiri)
2023
20235. Static Structural Analysis of a Skateboard Wheel With Different Materials
Küçük A. K., Gül O.
1st International Conference on Pioneer and Innovative Studies (ICPIS), Konya, Türkiye, 5 - 07 Haziran 2023, ss.293-296, (Tam Metin Bildiri)
2023
20236. Effect of Radius On Deep Drawing Stress Analysis
Özbek R., Gül O.
1st International Conference on Pioneer and Innovative Studies (ICPIS), Konya, Türkiye, 5 - 07 Haziran 2023, ss.374-378, (Tam Metin Bildiri)
2023
20237. Composite Materials Used In Helicopter Fuselage And Ansys Analysis
Köse H. H., Gül O.
1st International Conference on Pioneer and Innovative Studies (ICPIS), Konya, Türkiye, 5 - 07 Haziran 2023, ss.322-327, (Tam Metin Bildiri)
2023
20238. Design and Static Analysis Of A Phone Holder With Powerbank Unit
Işın M., Gül O.
1 st International Conference on Pioneer and Innovative Studies (ICPIS), Konya, Türkiye, 5 - 07 Haziran 2023, ss.399-405, (Tam Metin Bildiri)
2022
20229. Shock Load Damping Analysis Using A Vibration Shock Damping Element On Military Ship
ŞENTÜRK K., GÜL O.
3rd International Conference on Applied Engineering and Natural Sciences (ICAENS 2022), Konya, Türkiye, 20 Temmuz 2022, (Tam Metin Bildiri)
2022
202210. Design and Analysis of An Automobile Stabilizer Bar
MENDİ B., GÜL O.
3rd International Conference on Applied Engineering and Natural Sciences (ICAENS 2022), Konya, Türkiye, 20 Temmuz 2022, (Tam Metin Bildiri)
2022
202211. Design And Stress Analysis Of Universal Jack For Automobiles And Light Commercial Vehicles
ZORLU F., İPEK B., GÜL O.
3rd International Conference on Applied Engineering and Natural Sciences (ICAENS 2022), Konya, Türkiye, 20 Temmuz 2022, (Tam Metin Bildiri)
2022
202212. Design And Analysis Of A Connecting Rod Of Vehicles
DURSUN M., GÜL O.
3rd International Conference on Applied Engineering and Natural Sciences (ICAENS 2022), Konya, Türkiye, 20 Temmuz 2022, (Tam Metin Bildiri)
2022
202213. Wing Design and Analysis of Fixed Wing Male UAV (Unmanned Aerial Vehicle)
DEMİREL T. B., GÜL O.
3rd International Conference on Applied Engineering and Natural Sciences (ICAENS 2022), Konya, Türkiye, 20 Temmuz 2022, (Tam Metin Bildiri)
2022
202214. Static Structural Analysis of a Skateboard with Different Deck Thicknesses
ÇAYLAK U. D., GÜL O.
3rd International Conference on Applied Engineering and Natural Sciences (ICAENS 2022), Konya, Türkiye, 20 Temmuz 2022, (Tam Metin Bildiri)
2021
202115. STRESS ANALYSIS OF A TRAILER FIXED AXLE
Akgün H. İ., Gül O.
7. INTERNATIONAL ISTANBUL SCIENTIFIC RESEARCH CONGRESS, İstanbul, Türkiye, 18 - 19 Aralık 2021, (Tam Metin Bildiri)
2021
202116. FRONT LOWER SUSPENSION ARM ANALYSIS USING ANSYS TOPOLOGY OPTIMIZATION
Yalçınöz E., Aslan B., Gül O.
7. INTERNATIONAL ISTANBUL SCIENTIFIC RESEARCH CONGRESS, İstanbul, Türkiye, 18 - 19 Aralık 2021, (Tam Metin Bildiri)
2021
202117. BALLISTIC ANALYSIS: SIMULATION TO EXAMINE THE IMPACT OF A BULLET ON AN ALUMINUM PLATE
Demir Ş., Gül O.
3. INTERNATIONAL ANKARA MULTIDISCIPLINARY STUDIES CONGRESS, Ankara, Türkiye, 5 - 07 Aralık 2021, (Tam Metin Bildiri)
2020
202018. Effects of Boric Acid Addition on the Mechanical, Tribological and Thermal Properties of Thermoplastic Polyester Elastomer
GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
2nd International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2020), 7 - 09 Ekim 2020, (Özet Bildiri)
2020
202019. Investigation the Properties of Basalt/Glass Fiber Reinforced Thermoplastic Polyester Elastomer in the Presence of Hexagonal Boron Nitride
GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
2nd International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2020), 7 - 09 Ekim 2020, (Özet Bildiri)
2020
202020. Pumice Addition to Basalt/Carbon/Glass Fiber Reinforced TPE Matrix Composites: Mechanical, Tribological and Thermal Properties
KARTAL Y. G., GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
International Marmara Sciences Congress (IMASCON Spring 2020), 19 - 20 Haziran 2020, (Özet Bildiri)
2018
201821. TRIBOLOGICAL AND THERMOMECHANICAL PROPERTIES OF BENTONITE AND CARBON FIBER REINFORCED PPS MATRIX COMPOSITES
KIZIL A., DİNÇER U., GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
4th International Symposium on Composite Materials (KOMPEGE 2018), İzmir, Türkiye, 6 - 08 Eylül 2018, (Özet Bildiri)
2018
201822. INVESTIGATION THE TRIBOLOGICAL AND THERMOMECHANICAL PROPERTIES OF WOOD-FLOUR AND BASALT FIBER REINFORCED POLY(LACTIC ACID) MATRIX HYBRID COMPOSITES
Gül O., Kızıl A., Dinçer U., Karslı Yılmaz N. G., Yılmaz T.
4th International Symposium on Composite Materials (KOMPEGE 2018), İzmir, Türkiye, 6 - 08 Eylül 2018, (Özet Bildiri)
2018
201823. EFFECT OF ZEOLITE ADDITION ON THE MECHANICAL AND THERMAL PROPERTIES OF BASALT FIBER REINFORCED PPS MATRIX COMPOSITES
GÜL O., KIZIL A., DİNÇER U., KARSLI YILMAZ N. G., YILMAZ T.
4th International Symposium on Composite Materials (KOMPEGE 2018), İzmir, Türkiye, 6 - 08 Eylül 2018, (Özet Bildiri)
2018
201824. Zeolite Addition to Basalt Fiber Reinforced PPS Matrix Composites: Investigation the Tribological and Thermomechanical Properties
DİNÇER U., KIZIL A., GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
V. International Multidisciplinary Congress of Eurasia, V. International Multidisciplinary Congress of Eurasia (IMCOFE), Barcelona, İspanya, 24 - 26 Temmuz 2018, (Özet Bildiri)
2018
201825. Investigation the Mechanical and Thermal Properties of TPE in the Presence of Basalt Fiber and Boron Oxide Hybrid Addition
GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
V. International Multidisciplinary Congress of Eurasia, V. International Multidisciplinary Congress of Eurasia (IMCOFE), Barcelona, İspanya, 24 - 26 Temmuz 2018, (Özet Bildiri)
2018
201826. Effect of Bentonite Addition on the Mechanical and Thermal Properties of Carbon Fiber Reinforced PPS Matrix Composites
KIZIL A., DİNÇER U., GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
V. International Multidisciplinary Congress of Eurasia, V. International Multidisciplinary Congress of Eurasia (IMCOFE), Barcelona, İspanya, 24 - 26 Temmuz 2018, (Özet Bildiri)
2018
201827. Investigation the Tribological and Thermomechanical Properties of Bentonite and Basalt Fiber Reinforced PPS Matrix Composites
KIZIL A., DİNÇER U., GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
2ND INTERNATIONAL CONFERENCE ON TRIBOLOGY (TURKEYTRIB’18), 18 - 20 Nisan 2018, (Özet Bildiri)
2018
201828. Zeolite and Carbon Fiber Reinforced PPS Matrix Hybrid Composites: Tribological and Thermomechanical Properties
DİNÇER U., KIZIL A., GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
2ND INTERNATIONAL CONFERENCE ON TRIBOLOGY (TURKEYTRIB’18), İstanbul, Türkiye, 18 - 20 Nisan 2018, (Özet Bildiri)
2018
201829. Effects of Basalt Fiber and Boron Oxide Hybrid Addition on Adhesive Wear and Thermomechanical Properties of TPE Matrix Composites
GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
2ND INTERNATIONAL CONFERENCE ON TRIBOLOGY (TURKEYTRIB’18), İstanbul, Türkiye, 18 - 20 Nisan 2018, (Özet Bildiri)
2017
201730. Mechanical, Thermal and Morphological Properties of Carbon Fiber and Graphene Nanoplatelet Reinforced Polyamide 6,6 Hybride Composites: Effect of Chain Extender Addition
KARATAŞ E., GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
International Academic Research Congress-INES 2017, 18 - 21 Ekim 2017, (Özet Bildiri)
2017
201731. Investigation the Adhesive Wear, Mechanical and Thermal Properties of Polyamide 6,6 in the Presence of PBO, CBC and POSS Chain Extender
GÜL O., KARATAŞ E., KARSLI YILMAZ N. G., YILMAZ T.
International Academic Research Congress-INES 2017, 18 - 21 Ekim 2017, (Özet Bildiri)
2017
201732. Effects of Coupling Agent Addition on the Fracture Toughness, Mechanical, Thermal and Morphological Properties of Glass Fiber Reinforced Polyamide 6,6 Matrix Composites
GÜL O., KARATAŞ E., KARSLI YILMAZ N. G., YILMAZ T.
4th International Conference on Computational and Experimental Science and Engineering, 4 - 08 Ekim 2017, (Özet Bildiri)
2017
201733. Mechanical, Thermal and Morphological Properties of Graphene Nanoplatelet and Carbon Fiber Reinforced Poly(Phenylene Sulphide) Composites In The Presence Of Glycidyl Methacrylate Terpolymer as Matrix Modifier
GÜL O., KARATAŞ E., KARSLI YILMAZ N. G., YILMAZ T.
4th International Conference on Computational and Experimental Science and Engineering, 4 - 08 Ekim 2017, (Özet Bildiri)
2017
201734. Investigation Adhesive Wear and Thermomechanical Properties of Carbon Fiber Reinforced Poly(Phenylene Sulphide) Composites In The Presence Of Graphene Nanoplatelet and Glycdyl Metachrylate Terpolymer
KARATAŞ E., GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
9th International Conference on Tribology, BALKANTRIB’17, 13 - 15 Eylül 2017, (Özet Bildiri)
2017
201735. Investigation Effect of Graphene Nanoplatelet and 1,4-phenylene-bis- oxazoline Chain Extender Addition on Adhesive Wear and Thermomechanical Properties of Carbon Fiber Reinforced PA6,6 Composites
KARATAŞ E., GÜL O., KARSLI YILMAZ N. G., YILMAZ T.
9th International Conference on Tribology, BALKANTRIB’17, 13 - 15 Eylül 2017, (Özet Bildiri)
2017
201736. Investigation the Effect of Chain Extender Addition on the Adhesive Wear, Thermal and Thermomechanical Properties of Glass Fiber Reinforced Polyamide 6,6 Composites
GÜL O., KARATAŞ E., KARSLI YILMAZ N. G., YILMAZ T.
9th International Conference on Tribology, BALKANTRIB’17, 13 - 15 Eylül 2017, (Özet Bildiri)
2016
201637. Investigation of Thermal Mechanical Properties and Abrasive Wear Behaviour of Pumice Particle Short Carbon Fibre and POSS Reinforced PPS
YILMAZ S., ŞAHİN A. E., GÜL O., SINMAZÇELİK T., YILMAZ T.
The International Conference on Engineering and Natural Sciences (ICENS-2016), 24 - 28 Mayıs 2016, (Özet Bildiri)
2015
201538. Geri Dönüştürülmüş PET Polikarbonat Harmanlarının Özelliklerinin Zincir Uzatıcı Kullanılarak İyileştirilmesi
GÜL O., KARSLI YILMAZ N. G., YILMAZ S., YILMAZ T.
I. Ulusal Plastik Teknolojileri Sempozyumu"Plastikler, Polimer Kompozitler, Şekillendirme Teknolojileri, Türkiye, 15 - 16 Ekim 2015, (Tam Metin Bildiri)
2015
201539. GERİ DÖNÜŞTÜRÜLMÜŞ PET VE POLİKARBONAT HARMANLARININ ÖZELLİKLERİNİN ZİNCİR UZATICI KULLANILARAK İYİLEŞTİRİLMESİ
GÜL O., KARSLI YILMAZ N. G., YILMAZ S., YILMAZ T.
1. Ulusal Plastik Teknolojileri Sempozyumu (UPTS2015), Türkiye, 15 - 16 Ekim 2015, (Tam Metin Bildiri)
2015
201540. Investigation the Properties of Recycled PET/PC Blends In the Presence of Epoxy Based Chain Extender
GÜL O., YILMAZ S., KARSLI YILMAZ N. G., YILMAZ T.
5th INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS & EXHIBITION, 16 - 19 Nisan 2015, (Özet Bildiri)
2014
201441. Essential Work of Fracture Toughness and Mechanical Properties of Recycled PA 6
GÜL O., YILMAZ S., YILMAZ T.
22nd Annual International Conference on Composites or Nano Engineering, ICCE-22, 13 - 19 Temmuz 2014, (Tam Metin Bildiri)
2014
201442. The Twenty second Annual International Conference on COMPOSITES NANO ENGINEERING ICCE 22
GÜL O., YILMAZ S., YILMAZ T.
4. The International Advances In Applied Physics And Materials Science CongressExhibition, APMAS 2014, 24 - 27 Nisan 2014, (Özet Bildiri)
2014
201443. Investigation of Tribological Performance of Polyamide 6 (PA6) and Short Fiber Reinforced PA6 Composites
GÜL O., YILMAZ T.
4th International Advances in Applied Physics and Materials Science Congress&Exhibition (APMAS 2014), 24 - 27 Nisan 2014, (Özet Bildiri)
2014
201444. Investigation of Tribological Performance of Polyamide 6 PA6 Short Fiber Reinforced PA6 Composites
GÜL O., YILMAZ S., YILMAZ T.
4. The International Advances In Applied Physics And Materials Science Congress&Exhibition, APMAS 2014, 24 - 27 Nisan 2014, (Özet Bildiri)
2013
201345. THE EFFECT OF LOW TEMPERATURE PLASMA NITRIDING ON WEAR RESISTANCE OF Ti6Al4V ALLOY
GÜL O., SARI N. Y., SINMAZÇELİK T.
3rd International Advances In Applied Physics&Materials Science Congress, APMAS 2013, 24 - 28 Nisan 2013, (Özet Bildiri)
Desteklenen Projeler
2024 - 2025
2024 - 2025ABS/PA kullanılarak çok malzemeli 3B baskı ile imal edilen parçaların mekanik, termal ve tribolojik özelliklerinin incelenmesi
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
GÜL O. (Yürütücü), YILMAZ S.