Publications & Works

Publication Network
Articles 19
All (19)
SCI-E, SSCI, AHCI (15)
SCI-E, SSCI, AHCI, ESCI (16)
Scopus (16)
TRDizin (1)
Other Publications (2)

1. Investigation of Mechanical Properties in Layered Multi‐Material 3D Printing Using Commercial Filaments: Direct Stacking of ABS, PA, and Compatibilizing Layers

Yılmaz S., Gül O., Çoban O.
Journal of Vinyl and Additive Technology , vol.32, no.2, pp.484-498, 2026 (Scopus) Creative Commons License

2. Investigation of I-poss adition in hybrid filler reinforced polyphenylene matrix composites: Mechanical, thermal and thermomechanical properties

ŞAHİN A. E., YILMAZ S., SINMAZÇELİK T., YILMAZ T.
Journal of Composite Materials , 2026 (SCI-Expanded, Scopus)

3. Characterization of ABS/PETG multi-material composites 3D printed by print-pause-print method

EYRİ B., GÜL O., YILMAZ S., KARSLI YILMAZ N. G., YILMAZ T.
POLYMER ENGINEERING AND SCIENCE , 2025 (SCI-Expanded, Scopus)

4. Optimizing Printing Parameters for Enhanced Mechanical Properties of Carbon Fiber-Reinforced Engineering Filaments in FFF

Ulus G., Yılmaz S.
, vol.1, no.1, pp.1-8, 2024 (Peer-Reviewed Journal)

5. Analyzing the Influence of Multimaterial 3D Printing and Postprocessing on Mechanical and Tribological Characteristics

Yılmaz S., Okan Gul O., Eyri B., Karsli N. G., Yilmaz T.
MACROMOLECULAR MATERIALS AND ENGINEERING , vol.309, no.5, 2024 (SCI-Expanded, Scopus) Creative Commons License Sustainable Development

6. Tensile and wear behavior of 3D printed ABS and PC/ABS: An experimental study

Yılmaz S.
International Journal of Advanced Natural Sciences and Engineering Researches , vol.8, no.2, pp.473-478, 2024 (Peer-Reviewed Journal) Creative Commons License

7. Comprehensive analysis of 3D printed PA6.6 and fiber-reinforced variants: Revealing mechanical properties and adhesive wear behavior

Yılmaz S.
POLYMER COMPOSITES , vol.45, no.2, pp.1446-1460, 2024 (SCI-Expanded, Scopus) Creative Commons License Sustainable Development

8. Investigation of the influence of salt remelting process on the mechanical, tribological, and thermal properties of 3D-printed poly(lactic acid) materials

Yılmaz S., Eyri B., Gül O., Karslı Yılmaz N. G., Yılmaz T.
POLYMER ENGINEERING AND SCIENCE , vol.64, no.1, pp.17-30, 2024 (SCI-Expanded, Scopus) Sustainable Development

9. Comprehensive characterization of 3D-printed bamboo/poly(lactic acid) bio composites

Yılmaz S., Gül O., Eyri B., Yılmaz N. G., Yılmaz T.
POLYMER ENGINEERING AND SCIENCE , vol.63, no.9, pp.2958-2972, 2023 (SCI-Expanded, Scopus) Sustainable Development

10. Investigation of the effect of zeolite, bentonite, and basalt fiber as natural reinforcing materials on the material properties of PPS and CF-reinforced PPS

Kizil A., Dincer U., Yilmaz S., Gul O., Karslı Yılmaz N. G., Yilmaz T.
POLYMER ENGINEERING AND SCIENCE , vol.63, no.4, pp.1314-1322, 2023 (SCI-Expanded, Scopus)

11. Properties of compatibilized rPET/PC Blends with epoxy based Chain Extender

Yılmaz S., Gul O., Yilmaz N. G., Yilmaz T.
KGK-KAUTSCHUK GUMMI KUNSTSTOFFE , no.4, pp.62-67, 2022 (SCI-Expanded, Scopus)

12. Comparative Investigation of Mechanical, Tribological and Thermo-Mechanical Properties of Commonly Used 3D Printing Materials

Yılmaz S.
Avrupa Bilim ve Teknoloji Dergisi , no.32, pp.827-831, 2021 (TRDizin) Creative Commons License

13. Effect of chain extender and terpolymers on tensile and fracture properties of polyamide 6

Yılmaz S., Gül O., Yılmaz T.
POLYMER , vol.65, pp.63-71, 2015 (SCI-Expanded, Scopus)

14. Thermomechanical and Solid Particle Erosion Behaviour of CaCO3 and SGF (Short Glass Fibre) Reinforced ABS/PA6 Composites

Şahin A. E., Yılmaz S., Yılmaz T., Sınmazçelik T.
ACTA PHYSICA POLONICA A , vol.127, no.4, pp.1062-1064, 2015 (SCI-Expanded, Scopus)

15. Effect of CBC and G-POSS on Tribological Behaviour of Polyamide 6 and Short Glass Fiber Reinforced Polyamide 6 Composites

Gül O., Yılmaz S., Yılmaz T.
ACTA PHYSICA POLONICA A , vol.127, no.4, pp.1121-1123, 2015 (SCI-Expanded, Scopus)

16. Effect of POSS and chain extender on tensile and fracture properties of neat and short glass fiber reinforced polyamide 6 composites

Yılmaz S., Yılmaz T.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING , vol.67, pp.274-281, 2014 (SCI-Expanded, Scopus)

17. Essential work of fracture analysis of short glass fiber and/or calcite reinforced ABS/PA6 composites

Yılmaz S., Yılmaz T., Kahraman B.
POLYMER ENGINEERING AND SCIENCE , vol.54, no.3, pp.540-550, 2014 (SCI-Expanded, Scopus)

18. Fracture toughness analysis of O-POSS/PLA composites assessed by essential work of fracture method

Yılmaz S., Kodal M., Yılmaz T., Özkoç G.
COMPOSITES PART B-ENGINEERING , vol.56, pp.527-535, 2014 (SCI-Expanded, Scopus)

19. Effect of annealing process in water on the essential work of fracture response of ultra high molecular weight polyethylene

Yılmaz S., Yılmaz T., Arıcı A. A.
JOURNAL OF MATERIALS SCIENCE , vol.46, no.6, pp.1758-1766, 2011 (SCI-Expanded, Scopus)
Papers Presented at Peer-Reviewed Scientific Conferences 22

1. Tensile and wear behavior of 3D printed ABS and PC/ABS: An experimental study

YILMAZ S.
4th International Conference on Innovative Academic Studies March 12 – 13 in 2024, Konya, Turkey, 12 - 13 March 2024, (Summary Text)

2. Exploring Elasto-Plastic Fracture Behaviour of 3D Printed PC/ ABS Blend

Yılmaz S.
PROCEEDING BOOK OF 3RD INTERNATIONAL CONFERENCE ON SCIENTIFIC AND ACADEMIC RESEARCH ICSAR 2023, Konya, Turkey, 25 - 26 December 2023, vol.1, no.7, pp.978-981, (Full Text)

3. Comparative Investigation of Mechanical, Tribological and Thermo-Mechanical Properties of Commonly Used 3D Printing Materials

YILMAZ S.
RDCONF, International Conference on Design, Research and Development 2021, 31 December 2021, vol.32, pp.827-831, (Summary Text)

4. Study on mechanical/thermal properties and fracture behavior of PLA toughened with PBAT and POSS

YILMAZ S., KODAL M., KILIÇ TÜCCAR N., ÖZKOÇ G.
4 th International Conference on Engineering and Natural Sciences, Kiev, Ukraine, 2 - 06 May 2018, pp.189, (Summary Text)

5. Essential work of fracture toughness analysis of poly(lactic acid) thermoplastic starch blends

YILMAZ S., KODAL M., ÖZKOÇ G.
4 th International Conference on Engineering and Natural Sciences, Kiev, Ukraine, 2 - 06 May 2018, pp.190, (Summary Text)

6. Tribological Performance of Short Carbon Fiber and Pumice Particle Reinforced PPS/PA66 Blend

ŞAHİN A. E., YILMAZ S., SINMAZÇELİK T., YILMAZ T.
The International Conference on Engineering and Natural Sciences (ICENS), 24 - 28 May 2016, (Summary Text)

7. Investigation of Thermal Mechanical Properties and Abrasive Wear Behaviour of Pumice Particle Short Carbon Fibre and POSS Reinforced PPS

YILMAZ S., ŞAHİN A. E., GÜL O., SINMAZÇELİK T., YILMAZ T.
The International Conference on Engineering and Natural Sciences (ICENS-2016), 24 - 28 May 2016, (Summary Text)

8. POMZA TOZU VE KARBON ELYAF TAKVİYELİ POLİFENİLEN SÜLFİD PPS KOMPOZİTLERİN ADHEZİF AŞINMA DAVRANIŞININ İNCELENMESİ

YILMAZ S., ŞAHİN A. E., YILMAZ T., SINMAZÇELİK T.
ULUSLARARASI KATILIMLI III. EGE KOMPOZİT MALZEMELER SEMPOZYUMU, 5 - 07 November 2015, (Full Text) Sustainable Development

9. Pomza Tozu ve Karbon Elyaf Takviyeli Polifenilen Sülfid (PPS) Kompozitlerin Adhezif Aşınma Davranışının İncelenmesi

YILMAZ S., ŞAHİN A. E., YILMAZ T., SINMAZÇELİK T.
Uluslararası Katılımlı III. Ege Kompozit Malzemeler Sempozyumu, Turkey, 5 - 07 November 2015, (Summary Text) Sustainable Development

10. GERİ DÖNÜŞTÜRÜLMÜŞ PET VE POLİKARBONAT HARMANLARININ ÖZELLİKLERİNİN ZİNCİR UZATICI KULLANILARAK İYİLEŞTİRİLMESİ

GÜL O., KARSLI YILMAZ N. G., YILMAZ S., YILMAZ T.
1. Ulusal Plastik Teknolojileri Sempozyumu (UPTS2015), Turkey, 15 - 16 October 2015, (Full Text)

11. Geri Dönüştürülmüş PET Polikarbonat Harmanlarının Özelliklerinin Zincir Uzatıcı Kullanılarak İyileştirilmesi

GÜL O., KARSLI YILMAZ N. G., YILMAZ S., YILMAZ T.
I. Ulusal Plastik Teknolojileri Sempozyumu"Plastikler, Polimer Kompozitler, Şekillendirme Teknolojileri, Turkey, 15 - 16 October 2015, (Full Text)

12. Investigation the Properties of Recycled PET/PC Blends In the Presence of Epoxy Based Chain Extender

GÜL O., YILMAZ S., KARSLI YILMAZ N. G., YILMAZ T.
5th INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS & EXHIBITION, 16 - 19 April 2015, (Summary Text)

13. Essential Work of Fracture Toughness and Mechanical Properties of Recycled PA 6

GÜL O., YILMAZ S., YILMAZ T.
22nd Annual International Conference on Composites or Nano Engineering, ICCE-22, 13 - 19 July 2014, (Full Text)

14. Fracture Toughness Evaluation Of Toughened Polyamide 6 with Lotader And Chain Extenders

YILMAZ S., YILMAZ T.
ICCE-22 Twenty Second Annual International Conference on Composites/Nano Engineering, 13 - 19 July 2014, (Full Text)

15. The Twenty second Annual International Conference on COMPOSITES NANO ENGINEERING ICCE 22

GÜL O., YILMAZ S., YILMAZ T.
4. The International Advances In Applied Physics And Materials Science CongressExhibition, APMAS 2014, 24 - 27 April 2014, (Summary Text)

16. Investigation of Tribological Performance of Polyamide 6 PA6 Short Fiber Reinforced PA6 Composites

GÜL O., YILMAZ S., YILMAZ T.
4. The International Advances In Applied Physics And Materials Science Congress&Exhibition, APMAS 2014, 24 - 27 April 2014, (Summary Text)

17. Thermomechanical and Solid Particle Erosion Behavior of CaCO3 and SGF (Short Glass Fibre) Reinforced ABS/PA6 Composites

ŞAHİN A. E., YILMAZ S., YILMAZ T., YILDIRAN Y., AVCU E., SINMAZÇELİK T.
4th International Advances in Applied Physics and Materials Science Congress&Exhibition (APMAS 2014), 24 - 27 April 2014, (Summary Text)

18. FARKLI KALIP SICAKLIKLARINDA ÜRETİLEN POSS KATKILI PA 6 MATRİSLİ KOMPOZİTLERİN KIRILMA DAVRANIŞLARININ ESAS KIRILMA İŞİ METODU İLE KARAKTERİZASYONU

YILMAZ S., GÖR A., YILMAZ T.
II. Ulusal Ege Kompozit Malzemeler Sempozyumu - KOMPEGE 2013, Turkey, 7 - 09 November 2013, (Summary Text)

19. Farklı Kalıp Sıcaklıklarında Üretilen POSS Katkılı PA6 Matrisli Kompozitlerin Kırılma Davranışlarının Esas Kırılma İşi Metodu ile Karakterizasyonu

YILMAZ S., GÖR A., YILMAZ T.
II. Ulusal Ege Kompozit Malzemeler Sempozyumu, Turkey, 7 - 09 November 2013, (Full Text)

20. Fracture Behavior of O-POSS/PLA Composites by Using the Essential Work of Fracture Method

YILMAZ S., KODAL M., YILMAZ T., ÖZKOÇ G.
4th International Conference on Biodegradable and Biobased Polymers-BIOPOL, Italy, 2 - 04 October 2013, (Full Text)

21. Cam Elyafı ve Kalsit Takviyeli ABS/PA6 Kompozitlerin Kırılma Davranışlarının Esas Kırılma İşi Yöntemi ile İncelenmesi

KAHRAMAN B., YILMAZ S., YILMAZ T.
4. Ulusal Polimer Bilim ve Teknoloji Kongresi, Turkey, 5 - 08 September 2012, (Summary Text)

22. Hidrotermal Yaşlandırmanın Çok Yüksek Molekül Ağırlıklı Polietilen Malzemenin Kırılma Davranışına Etkisi

YILMAZ S., ARICI A. A., YILMAZ T.
3. Ulusal Polimer Bilim ve Teknoloji Kongresi, Turkey, 12 - 14 May 2010, (Full Text)
Books 1

1. FFF-BASED 3D PRINTING OF METALS: A BRIEF REVIEW

YILMAZ S.
in: INTERNATIONAL STUDIES IN ENGINEERING, ÖZALP COŞKUN, BARDAK SELAHATTİN, Editor, Serüven Yayınevi, Ankara, pp.131-139, 2024
Metrics

Publication

45

Publication (WoS)

16

Publication (Scopus)

16

Citation (WoS)

220

H-Index (WoS)

9

Citation (Scopus)

206

H-Index (Scopus)

9

Citation (Scholar)

259

H-Index (Scholar)

10

Project

8

Thesis Advisory

2

Open Access

4
UN Sustainable Development Goals
SDG 3: GOAL 3: GOOD HEALTH AND WELL-BEING
SDG 9: GOAL 9: INDUSTRIAL INNOVATION AND INFRASTRUCTURE