Biyografi
Dr. Soylu was born in 1968, in Kayseri, Turkey. After receiving his B.S. degree from Gazi University in 1988, he worked as Internal Combustion Engine Instructor for the Ministry of National Education and National Defense in Turkey until 1994. Then, he went to Iowa State University, U.S.A. for his M.S. and Ph.D education in Mechanical Engineering under supervision of Prof. Dr. Jon Van Gerpen. His M.S. and Ph.D. research works focused on alternative fuels (natural gas and bio-diesel) for internal combustion engines, emission measurement, thermodynamic engine modeling and autoignition modeling that were supported by John Deere Product Engineering Center, and many other Industrial and State organizations in the US. Through end of his Ph.D. study, Dr. Soylu worked for Caterpillar Inc. as an Analytical Engineer in Peoria, IL for the development of the advanced diesel engines from 2000 to 2001. After receiving his Ph.D. degree in 2001, Dr. Soylu joined to Sakarya University, Turkey as an Assistant Professor.
His research works at Sakarya University centered on the development of environmentally friendly road transport vehicles by means of improving the efficiency and reducing emissions. He performed research specifically on alternative fuels (natural gas, bio-diesel, bio-gas, and hydrogen) and advance engine/vehicle technologies. The courses that he taught were mainly thermal science courses which were Thermodynamics, Heat Transfer, Air Pollution and Control.
As Dr. Soylu was selected as independent expert by European Commission in the field of Energy and Transport in 2003, he started evaluating and reviewing the FP6 and FP7 projects on behalf of the European Commission. Then Dr. Soylu moved to Italy to work as a Senior/Visiting Scientist in the Joint Research Center of European Commission for a year from November 2004 to November 2005 to provide technical and scientific support to the European Commission for their legislative works. His work, in the Joint Research Center, focused on fuels and additives for internal combustion engines, portable emission measurement systems, and small engines.
After returning to Sakarya University, he clearly indicated his vision and leadership qualities as he coordinated a collaborative research project, that is Sakarya Air Quality Protection and Improvement (SAHAKK-I), with partners from Industry, Sakarya Municipality and Sakarya Governorship to solve real world Transport and Air Pollution problems of Sakarya. The overall goal of SAHAKK-I research project was to provide technical and scientific support to the policymakers and relevant stakeholders for sustainable development. After that he became an Associate Professor of Sakarya University and his scientific and leadership qualities were further strengthened as he coordinated the Hybrid City Bus project in which the first Hybrid City Bus of Turkey was developed and tested under real world urban driving conditions. During this period, he has supervised many graduate students, all of whom have completed their M.S. degrees, and produced several peer-reviewed publications.
Dr. Soylu was promoted to full professor and department head position at Bilecik S. Edebali University in 2015. He had been appointed various administrative duties such as Department Head, Member of Faculty Administration Committee and Member University Administration Committee. His research in Bilecik S. Edebali University mostly focused on multidisciplinary research projects which focus on the development of particle filters for Internal Combustion Engines. Starting from spring 2020 semester, he has been a faculty of Kocaeli University. He is currently a teaching thermal science courses and performing research on mainly IC Engines and Hybrid Vehicles.
As a result, Dr. Soylu has the expertise, leadership, training, and motivation necessary to successfully carry out energy and automotive related research projects and teach thermal science courses. He has a broad background in mechanical engineering, with specific training and expertise in thermal science and automotive engineering.
Duyurular & Dokümanlar
Dosya İndir
Eğitim Bilgileri
1996 - 2001
1996 - 2001Doktora
Iowa State University of Science and Technology, Engineering Faculty, Mechanical Engineering, Amerika Birleşik Devletleri
1994 - 1996
1994 - 1996Yüksek Lisans
Iowa State University of Science and Technology, Engineering Faculty, Mechanical Engineering, Amerika Birleşik Devletleri
1984 - 1988
1984 - 1988Lisans
Gazi Üniversitesi, Teknik Eğitim Fakültesi, Otomotiv, Türkiye
Yabancı Diller
C2 Ustalık
C2 Ustalıkİngilizce
Araştırma Alanları
Mühendislik ve Teknoloji
Otomotiv
Konvansiyonel Motorlu Taşıtlar
İçten Yanmalı Motorlar
Yakıtlar ve Yanma
Emisyonlar ve Hava Kirliliği
Hibrit ve Elektrikli Taşıtlar
Gaz Türbinleri
Akademik Ünvanlar / Görevler
2020 - Devam Ediyor
2020 - Devam EdiyorProf. Dr.
Kocaeli Üniversitesi, Mühendislik Fakültesi, Makina Mühendisliği
2015 - 2020
2015 - 2020Prof. Dr.
Bilecik Şeyh Edebali Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
2008 - 2015
2008 - 2015Doç. Dr.
Sakarya Üniversitesi, Mühendislik Fakültesi
2005 - 2008
2005 - 2008Yrd. Doç. Dr.
Sakarya Üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği Bölümü
2004 - 2005
2004 - 2005Yrd. Doç. Dr.
Çevre ve Sürdürülebilirlik Enstitüsü
2001 - 2004
2001 - 2004Yrd. Doç. Dr.
Sakarya Üniversitesi, Teknik Eğitim Fakültesi, Makine Eğitimi Bölümü
1994 - 2001
1994 - 2001Araştırma Görevlisi
Iowa State University of Science and Technology, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
Yönetimsel Görevler
2020 - Devam Ediyor
2020 - Devam EdiyorAnabilim/Bilim Dalı Başkanı
Kocaeli Üniversitesi, Mühendislik Fakültesi, Makina Mühendisliği
2015 - 2020
2015 - 2020Üniversite Yönetim Kurulu Üyesi
Bilecik Şeyh Edebali Üniversitesi, Mühendislik Fakültesi, Makine Ve İmalat Mühendisliği Bölümü
2015 - 2018
2015 - 2018Bölüm Başkanı
Bilecik Şeyh Edebali Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
Akademi Dışı Deneyim
2004 - 2005
2004 - 2005Visiting Scientist
European Commission Joint Research Center, Visiting Scientist
2000 - 2001
2000 - 2001Analitik Mühendis
Şirket, Caterpillar inc., Peoria , IL, USA, Technology Center, Analitik Mühendis
2000 - 2001
2000 - 2001Makine Mühendisi
Caterpillar Inc., Makine Mühendisi
1994 - 2001
1994 - 2001Araştırma Görevlisi
Iowa Devlet Üniversitesi, Araştırma Görevlisi
Makaleler
2018
20181. Microstructural Characterization, Mechanical, Physical and Thermal Properties of a Diesel Particulate Filter
Acikbas N. C., Ture Y., Gurlek E., Ozcan S., Soylu Ş., Acikbas G., et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
, cilt.43, sa.3, ss.1383-1394, 2018 (SCI-Expanded, Scopus)
2015
20152. Development of PN emission factors for the real world urban driving conditions of a hybrid city bus
Soylu Ş.
APPLIED ENERGY
, cilt.138, ss.488-495, 2015 (SCI-Expanded, Scopus)
2014
20143. The effects of urban driving conditions on the operating characteristics of conventional and hybrid electric city buses
Soylu Ş.
APPLIED ENERGY
, cilt.135, ss.472-482, 2014 (SCI-Expanded, Scopus)
2014
20144. EXAMINATION OF PN EMISSIONS AND SIZE DISTRIBUTIONS OF A HYBRID CITY BUS UNDER REAL WORLD URBAN DRIVING CONDITIONS
Soylu Ş.
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY
, cilt.15, sa.3, ss.369-376, 2014 (SCI-Expanded, Scopus)
2014
20145. EXAMINATION OF THE BRAKING ENERGY RECOVERY POTENTIALS OF A CITY BUS UNDER URBAN DRIVING CONDITIONS
Soylu Ş.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY
, cilt.34, sa.2, ss.39-47, 2014 (SCI-Expanded, TRDizin)
2014
20146. COMPARISON OF OPERATING CHARACTERISTICS OF CONVENTIONAL, DIESEL-ELECTRIC AND HYBRID-ELECTRIC CITY BUSSES UNDER REAL WORLD URBAN DRIVING CONDITIONS
Soylu Ş.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY
, cilt.34, sa.2, ss.143-154, 2014 (SCI-Expanded, TRDizin)
2007
20077. Estimation of Turkish road transport emissions
Soylu Ş.
ENERGY POLICY
, cilt.35, sa.8, ss.4088-4094, 2007 (SCI-Expanded, SSCI, Scopus)
2005
20058. Fueling direct injected diesel engines with 2% biodiesel blend
Schumacher L., Soylu Ş., Van Gerpen J., Wetherell W.
APPLIED ENGINEERING IN AGRICULTURE
, cilt.21, sa.2, ss.149-152, 2005 (SCI-Expanded, Scopus)
2005
20059. Prediction of knock limited operating conditions of a natural gas engine
Soylu Ş.
ENERGY CONVERSION AND MANAGEMENT
, cilt.46, sa.1, ss.121-138, 2005 (SCI-Expanded, Scopus)
2005
200510. Examination of combustion characteristics and phasing strategies of a natural gas HCCI engine
Soylu Ş.
ENERGY CONVERSION AND MANAGEMENT
, cilt.46, sa.1, ss.101-119, 2005 (SCI-Expanded, Scopus)
2004
200411. Development of empirically based burning rate sub-models for a natural gas engine
Soylu Ş., Van Gerpen J.
ENERGY CONVERSION AND MANAGEMENT
, cilt.45, sa.4, ss.467-481, 2004 (SCI-Expanded)
2003
200312. Development of an autoignition submodel for natural gas engines
Soylu Ş., Van Gerpen J.
FUEL
, cilt.82, sa.14, ss.1699-1707, 2003 (SCI-Expanded, Scopus)
2000
200013. The speed of sound and isentropic bulk modulus of biodiesel at 21 degrees C from atmospheric pressure to 35 MPa
Tat M. E., Van Gerpen J. H., Soylu Ş., Canakci M., Monyem A., Wormley S.
JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY
, cilt.77, sa.3, ss.285-289, 2000 (SCI-Expanded, Scopus)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler
2025
20251. MODELING EXHAUST ENERGY RECOVERY WITH ORGANIC RANKINE CYCLE IN DIESEL ENGINES
Köybaşı Ö. B., Soylu Ş.
6. INTERNATIONAL TRAKYA SCIENTIFIC RESEARCH CONGRESS 05-06 APRIL 2025 EDİRNE, Edirne, Türkiye, 5 - 06 Nisan 2025, ss.648-661, (Tam Metin Bildiri)
2025
20252. EXHAUST ENERGY RECOVERY IN A DIESEL ENGINE USING THE ORGANIC RANKINE CYCLE
Köybaşı Ö. B., Soylu Ş.
20TH INTERNATIONAL ISTANBUL SCIENTIFIC RESEARCH CONGRESS ON LIFE, ENGINEERING, ARCHITECTURE AND MATHEMATICAL SCIENCES, İstanbul, Türkiye, 21 - 23 Şubat 2025, ss.473, (Özet Bildiri)
2024
20243. NUMERICAL ANALYSIS OF RADIAL TURBO COMPRESSORS WITH BACKWARDCURVED AND STRAIGHT BLADES
Aslan E., Kumru F., Çelik A., Soylu Ş.
SEVENTH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2024), İstanbul, Türkiye, 24 - 26 Aralık 2024, cilt.535, ss.549-556, (Tam Metin Bildiri)
2023
20234. Yüksek Hızlı bir Dizel Motorunda Enerji Dağılımının Artan Motor Hızlarında İncelenmesi
Yazan A. H., Aytimur E. E., Soylu Ş.
The 3rd International Symposium on Automotive Science and Technology, Ankara, Türkiye, 7 - 08 Eylül 2023, ss.394-403, (Tam Metin Bildiri)
2022
20225. Experimental Investigation of Effects of Engine Load and Speed on the Raw Exhaust Noise Characteristic
Tekin M. Ş., Bostancı G., Soylu Ş., Güven E. A.
1st International Conference on Engineering and Applied Natural Sciences, Kocaeli, Türkiye, 10 - 13 Mayıs 2022, ss.380-385, (Tam Metin Bildiri)
2018
20186. İçten Yanmalı Motorlar için Partikül Filtreleri
ÇALIŞ AÇIKBAŞ N., AÇIKBAŞ G., ÖZCAN S., SOYLU Ş.
I. Uluslararası Bilimsel Çalışmalarda Yenilikçi Yaklaşımlar Sempozyumu(ISAS-2018), Antalya, Türkiye, 11 - 13 Nisan 2018, (Özet Bildiri)
2018
20187. Properties of porous silicon nitride bonded-silicon carbide ceramics for diesel particle filter
ÇALIŞ AÇIKBAŞ N., SOYLU Ş., kırcalı Ş., AÇIKBAŞ G., ÖZCAN S.
1stInternational Symposium on Innovative Approaches in Scientific Studies, 11 - 13 Nisan 2018, (Özet Bildiri)
2018
20188. Particulate Filters for Internal Combustion Engines
ÇALIŞ AÇIKBAŞ N., AÇIKBAŞ G., ÖZCAN S., SOYLU Ş.
1stInternational Symposium on Innovative Approaches in Scientific Studies, 11 - 13 Nisan 2018, (Özet Bildiri)
2017
20179. Porous SiC based composite ceramics fabricated by partial reaction sintering method for diesel particle filter
ÇALIŞ AÇIKBAŞ N., SOYLU Ş., Kırcalı Ş.
II. INES International Academic Research Congress, 18 - 21 Ekim 2017, (Özet Bildiri)
2017
201710. Examination of the Energy Saving Potential of a Hybrid City Bus with Regenerative Braking
SOYLU Ş., DEMİR Z.
6th International Conference on Advanced Technology Sciences, 12 - 15 Eylül 2017, (Özet Bildiri)
2017
201711. Talaşlı İmalatta Kullanılan Sialon Esaslı Kesici Uçların Mikroyapı Tasarımı
ÇALIŞ AÇIKBAŞ N., AÇIKBAŞ G., YAMAN B., SOYLU Ş.
2 International Congress On Engineering Architecture And Design (UMMTK), 12 - 13 Mayıs 2017, (Özet Bildiri)
2017
201712. KATALİZÖR MİKTARININ POLİMER MATRİSLİ KOMPOZİT MALZEME ÖZELLİKLERİ ÜZERİNE ETKİSİ
AÇIKBAŞ G., ÇALIŞ AÇIKBAŞ N., YAMAN B., SOYLU Ş.
2. ULUSLARARASI MÜHENDİSLİK MİMARLIK VE TASARIM KONGRESİ, 12 - 13 Mayıs 2017, (Özet Bildiri)
2017
201713. TALAŞLI İMALATTA KULLANILAN SiAlON ESASLI KESİCİ UÇLARIN MİKROYAPI TASARIMI
ÇALIŞ AÇIKBAŞ N., AÇIKBAŞ G., YAMAN B., SOYLU Ş.
2. ULUSLARARASI MÜHENDİSLİK MİMARLIK VE TASARIM KONGRESİ, 12 - 13 Mayıs 2017, (Özet Bildiri)
2017
201714. SiC DİZEL PARTİKÜL FİLTRE ÜRETİMİ VE KARAKTERİZASYONU
Çetintaş B., SOYLU Ş., ÇALIŞ AÇIKBAŞ N.
4. UNİKOP Proje Pazarı Etkinliği, Türkiye, 17 - 18 Mayıs 2017, (Tam Metin Bildiri)
2017
201715. Katalizör Miktarının Polimer Matrisli Kompozit Malzeme Özellikleri Üzerine Etkisi
AÇIKBAŞ G., ÇALIŞ AÇIKBAŞ N., YAMAN B., SOYLU Ş.
2 International Congress On Engineering Architecture And Design (UMMTK), 12 - 13 Mayıs 2017, (Özet Bildiri)
2016
201616. Structural and Chemical Characterization of Commercial Catalytic Converter
TÜRE Y., Gürlek E., ÇALIŞ AÇIKBAŞ N., SOYLU Ş.
1ST INTERNATIONAL BLACK SEA CONGRESS ON ENVIRONMENTAL SCIENCES (IBCESS), 31 Ağustos - 03 Eylül 2016, (Tam Metin Bildiri)
2016
201617. Characterization of Commercial Diesel PArticle Filter
TÜRE Y., Gürlek E., ÇALIŞ AÇIKBAŞ N., SOYLU Ş.
1st international Black Sea Congress on Environmental Sciences, 31 Ağustos - 03 Eylül 2016, (Özet Bildiri)
2016
201618. Dizel Partikül Filtre Karakterizasyonu
Gürlek E., TÜRE Y., ÇALIŞ AÇIKBAŞ N., SOYLU Ş., Güdü T.
OTEKON16, Türkiye, 23 - 24 Mayıs 2016, (Tam Metin Bildiri)
2016
201619. CHARACTERIZATION OF CATALYTIC CONVERTER
TÜRE Y., Gürlek E., ÇALIŞ AÇIKBAŞ N., SOYLU Ş., Güdü T.
NCC6- 6th Catalysis Conference, 27 - 30 Nisan 2016, (Özet Bildiri)
2015
201520. Sapanca lake air pollution originating from transportation investigatıon of heavy metal emissions
Demirel H., Ates A., SOYLU Ş.
International Conference on Engineering and Natural Science, 15 - 19 Mayıs 2015
2014
201421. Examination of operating characteristics of a Conventional and a Hybrid Electric Bus under real world urban driving conditions
SOYLU Ş.
1st International Symposium on Energy Challenges and Mechanics, Aberden, 8 - 10 Temmuz 2014, (Özet Bildiri)
2012
201222. Real world PN emissions from a hybrid city bus under urban driving conditions
SOYLU Ş.
19th International Transport and Air Pollution Conference 2012, 26 - 28 Kasım 2012, (Tam Metin Bildiri)
2012
201223. Examination of Particle Number Emissions of a Hybrid City Bus
SOYLU Ş.
International Conference on Energy and Automotive Technologies, İstanbul, 12 Ekim 2012, (Tam Metin Bildiri)
2012
201224. Examınatıon of fuel economy and NOx emissions of a hybrid city bus under real world urban driving conditions
SOYLU Ş., Hulya S.
OTEKON 2012, Türkiye, 4 - 05 Haziran 2012, (Tam Metin Bildiri)
2010
201025. Examination of Real World Operating Conditions and Emissions of a Hybrid City Bus İstanbul
SOYLU Ş., Hulya S., Bal A.
International Conference on energy and Automotive Technologies, İstanbul, 05 Kasım 2010, (Tam Metin Bildiri)
2009
200926. Adapazarı şehir içi trafik karakteristikleri ve ulaştırma kaynaklı emisyonların saatlik incelenmesi
SOYLU Ş., Semercioglu H., Bal A., Ay E.
9. Hava Kirliliği ve Kontrolü Sempozyumu, ODTÜ KKM – ANKARA, Türkiye, 25 - 27 Ekim 2009, (Tam Metin Bildiri)
2010
201027. 5 Otomotiv Teknolojileri Kongresi Bursa
SOYLU Ş., Bal A., Hulya S., Ay E.
Şehir Otobüslerinin Gerçek Dünya Koşullarında Motor Çalışma Şartlarının ve NOx Emisyonlarının İncelenmesi, Otekon 2010 5. Otomotiv Teknolojileri Kongresi, Türkiye, 7 - 10 Haziran 2010, (Tam Metin Bildiri)
2004
200428. Otomobiller için alternatif enerji kaynaklarının incelenmesi
SOYLU Ş., Murat K., ERMİŞ K.
II. Ulusal Ege Enerji Sempozyumu, Türkiye, 26 - 28 Mayıs 2004, (Tam Metin Bildiri)
2008
200829. Monitoring of urban transport sourced pollutants by using GIS istanbul
SOYLU Ş., Mahnaz G.
5th International Conference on Geographic Information Systems, İstanbul, 2 - 05 Temmuz 2008, (Tam Metin Bildiri)
2007
200730. Analysis of urban transport sourced emissions Adapazari case study Konya
SOYLU Ş., Gumrukcuoglu M.
Uluslararası Küresel İklim Değişikliği ve Çevresel Etkileri Konferansı, Konya, 18 - 20 Ekim 2007, (Tam Metin Bildiri)
2004
200431. Examination of Knock Limits of a Spark Ignited Natural Gas Engine
SOYLU Ş.
Proceedings of ICEF04 ASME Internal Combustion Engine Division 2004 Fall Technical Conference Long Beach, CA, USA, 24 - 27 Ekim 2004, (Tam Metin Bildiri)
2004
200432. Examination of Combustion Characteristics of an HCCI Engine
SOYLU Ş.
The Sixth International Symposium on Diognostics and Modeling of Combustion in Internal Combustion Engines, Yokohoma, Japan, 02 Ağustos 2004 - 05 Ağustos 2005, (Tam Metin Bildiri)
2003
200333. Combustion analysis of a natural gas engine
SOYLU Ş.
ICES2003-563 ASME spring conference ICED 2003, Salzburg, Austria, 11 - 14 Mayıs 2003, (Tam Metin Bildiri)
2002
200234. Simple Modeling of Combustion for Natural Gas Engines
SOYLU Ş.
SAE Paper no: 2002-01-2733, 21 Ekim 2002, (Tam Metin Bildiri)
2002
200235. Prediction of Knock Limited Operating Conditions of a Natural Gas Engine
SOYLU Ş.
Automotive Technologies Congress, June 24-26, 2002, Uludağ Universitesi, Bursa, 24 - 26 Haziran 2002, (Tam Metin Bildiri)
1999
199936. Evaluation of the Lubricity of Soybean Oil based Additives in Diesel Fuel
SOYLU Ş., Jon V. G., Tata M. E.
American Society of Agricultural Engineers 1999 Annual Meeting, Toronto, Canada, 18 - 21 Temmuz 1999, (Tam Metin Bildiri)
1998
199837. Fueling Direct Injected Diesel Engines with 2 Biodiesel Blend
SOYLU Ş., LG S., Jon V. G., Wetherell W.
American Society of Agricultural Engineers , ASAE 98-6084, Orlando, Florida, 13-15 July 1998, 13 - 15 Temmuz 1998, (Tam Metin Bildiri)
1998
199838. Fuel Effects on the Knocking Limit of a Heavy Duty Natural Gas Engine
SOYLU Ş., Jon V. G.
SAE Meeting, Paper No 981401, 01 Mayıs 1998, (Tam Metin Bildiri)
1997
199739. Determination of Knock sensor Location on a Heavy duty Natural Gas engine SAE Paper No 971705
SOYLU Ş., Jon V. G.
SAE Meeting 1997, 01 Mayıs 1997, (Tam Metin Bildiri)
Kitaplar
2009
20091. Development of an autoignition model for natural gas engines an experimental and modeling study
SOYLU Ş.
VDM Verlag Dr. Müller Aktiengesellschaft & Co. KG, Dudweiler Landstr. 99, 66123 Saarbrücken, Deutschland, 2009
Desteklenen Projeler
2023 - Devam Ediyor
2023 - Devam Ediyorİçten yanmalı ve mikrojet motorlar için radyal kompresör test sistemi tasarımı ve kurulumu
Yükseköğretim Kurumları Destekli Proje , BAP Alt Yapı
SOYLU Ş. (Yürütücü), Sarıtaş B. C., Yılmaz S., Çelik A., BAHAR Z., MAKARACI M., et al.
2023 - 2024
2023 - 2024Motorlu ve Hibrit Elektrikli Taşıtların Performans Testlerinin Sarf Malzeme İhtiyacının Karşılanması Projesi
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
SOYLU Ş. (Yürütücü), DÜLGER Z., ASLAN E., GÜVEN E. A., AYTİMUR E. E., BOLAT F. Ç.
2021 - 2023
2021 - 2023İçten Yanmalı Motorlar için Susturucu Tasarımı
Yükseköğretim Kurumları Destekli Proje , BAP Diğer
GÜVEN E. A. (Yürütücü), TEKİN M. Ş., SOYLU Ş., AYTİMUR E. E., BOSTANCI G., YILDIRIM K. U., et al.
Bilimsel Danışmanlıklar
2018 - Devam Ediyor
2018 - Devam EdiyorBilimsel Projeler İçin Yapılan Danışmanlık
Tubitak MAM, TÜLOMSAŞ
Bilecik Şeyh Edebali Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Türkiye