Publications & Works

Published journal articles indexed by SCI, SSCI, and AHCI

Hot Oxidation Resistance of a Novel Cast Iron Modified by Nb and Al Addition for Exhaust Manifold Applications

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.53, no.6, pp.1991-2003, 2022 (Journal Indexed in SCI) identifier identifier

SIMULATION AND ANALYSIS OF THE SOLIDIFICATION CHARACTERISTICS OF A Si-Mo DUCTILE IRON

JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, vol.57, no.1, pp.53-62, 2021 (Journal Indexed in SCI) identifier identifier

Thermal and microstructural characterization of a novel ductile cast iron modified by aluminum addition

International Journal of Minerals, Metallurgy and Materials, vol.27, no.2, pp.190-199, 2020 (Journal Indexed in SCI) identifier identifier

Effect of Single and Duplex Thin Hard Film Coatings on the Wear Resistance of 1.2343 Tool Steel

Transactions of the Indian Institute of Metals, vol.71, no.2, pp.411-419, 2018 (Journal Indexed in SCI Expanded) identifier identifier

Tribological behavior of CrN-coated Cr–Mo–V steels used as die materials

International Journal of Minerals, Metallurgy and Materials, vol.24, no.12, pp.1394-1402, 2017 (Journal Indexed in SCI Expanded) identifier identifier

Microstructural and mechanical characterization of the parabolic spring steel 51CrV4

Materialpruefung/Materials Testing, vol.59, no.11-12, pp.997-1002, 2017 (Journal Indexed in SCI Expanded) identifier identifier

A case study of a stress corrosion cracking failure in an AA5083 mold material used for curing rubber compounds

Protection of Metals and Physical Chemistry of Surfaces, vol.52, no.6, pp.1100-1105, 2016 (Journal Indexed in SCI) identifier identifier

TRIBO-CORROSION BEHAVIOR OF CAST AND SELECTIVE LASER MELTED Co-Cr ALLOY FOR DENTAL APPLICATIONS

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURING, no.12, pp.61-64, 2016 (Journal Indexed in SCI Expanded) Creative Commons License

Fractographical analysis of fatigue failed Cu-2.55Ni-0.55Si alloy

Theoretical and Applied Fracture Mechanics, vol.83, pp.60-66, 2016 (Journal Indexed in SCI Expanded) identifier identifier

Wear behavior of surface treated X45MoCrV5-3-l tool steel at room and elevated temperatures

Acta Physica Polonica A, vol.127, no.4, pp.1221-1224, 2015 (Journal Indexed in SCI Expanded) identifier identifier

Growth of biomimetic films - influences of polymer topography and phase structure

BIOINSPIRED BIOMIMETIC AND NANOBIOMATERIALS, vol.3, no.3, pp.146-159, 2014 (Journal Indexed in SCI) identifier identifier

A study of wear of high-chromium cast iron under dry friction

METAL SCIENCE AND HEAT TREATMENT, vol.55, no.3-4, pp.181-183, 2013 (Journal Indexed in SCI) identifier identifier

Effect of tempering temperature and microstructure on the corrosion behavior of a tempered steel

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, vol.49, no.2, pp.240-246, 2013 (Journal Indexed in SCI) identifier identifier

Effect of matrix toughness and grain morphology on fracture of steels

METAL SCIENCE AND HEAT TREATMENT, vol.54, no.11-12, pp.648-653, 2013 (Journal Indexed in SCI) identifier identifier

Wear Behaviour of Heat Treated 100Cr6 Steels

MATERIALS TESTING, vol.55, no.4, pp.290-293, 2013 (Journal Indexed in SCI) identifier identifier

Effect of zinc oxide type on ageing properties of Styrene Butadiene Rubber compounds

MATERIALS & DESIGN, vol.31, no.3, pp.1533-1539, 2010 (Journal Indexed in SCI) identifier identifier

A SMALL-ANGLE NEUTRON-SCATTERING STUDY OF THE KINETICS OF PHASE-SEPARATION IN A SUPERSATURATED NI-12.5 AT-PCT SI ALLOY

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.20, no.4, pp.699-710, 1989 (Journal Indexed in SCI) identifier identifier

A SMALL-ANGLE NEUTRON-SCATTERING STUDY OF DECOMPOSITION DYNAMICS IN NI87.5SI12.5

JOURNAL OF APPLIED CRYSTALLOGRAPHY, vol.21, pp.878-882, 1988 (Journal Indexed in SCI) identifier identifier

OBSERVATION OF DIFFUSE STREAKS IN AU-FE ALLOYS UTILIZING SYNCHROTRON RADIATION

SCRIPTA METALLURGICA, vol.21, no.5, pp.619-623, 1987 (Journal Indexed in SCI) identifier identifier identifier

SPATIAL CORRELATION OF GAMMA-PRIME PRECIPITATES IN A NI-SI ALLOY

SCRIPTA METALLURGICA, vol.20, no.12, pp.1739-1744, 1986 (Journal Indexed in SCI) identifier identifier identifier

THE EARLY STAGE OF GAMMA-PRIME PRECIPITATION IN A NICKEL-SILICON ALLOY

SCRIPTA METALLURGICA, vol.18, no.12, pp.1395-1399, 1984 (Journal Indexed in SCI) identifier identifier identifier

DECOMPOSITION OF A BETA-1-PHASE CU-AL-NI ALLOY AT ELEVATED-TEMPERATURE

SCRIPTA METALLURGICA, vol.17, no.11, pp.1333-1336, 1983 (Journal Indexed in SCI) identifier identifier identifier

Articles Published in Other Journals

Fatigue behavior of precipitation strengthened Cu–Ni–Si alloy modified by Cr and Zr addition

International Journal of Structural Integrity, vol.11, no.6, pp.861-873, 2020 (Journal Indexed in ESCI) identifier identifier

Characterization of Ferritic Ductile Cast Irons Modified by W and Nb Additions

Bayburt Üniversitesi Fen Bilimleri Dergisi, vol.1, no.1, pp.15-21, 2018 (Other Refereed National Journals)

Solid Particle Erosion Behavior of SiMo Ductile Cast Iron

Bayburt Üniversitesi Fen Bilimleri Dergisi, vol.1, pp.22-27, 2018 (Other Refereed National Journals)

Tribological Characterization of Al-bronzes Used as Mold Materials

Archives of Foundry Engineering, vol.17, no.4, pp.7-12, 2017 (Refereed Journals of Other Institutions) Creative Commons License identifier identifier

Antibakterielle und knochenwachstumfördernde Beschichtungen für Bandscheibenimplantate

Galvanotechnik, vol.108, pp.1872-1881, 2017 (Refereed Journals of Other Institutions)

Metallographic Examinations on Quenched and Tempered Steels Subjected to Ballistic Impact

Journal of Dynamic Behavior of Materials, vol.3, no.3, pp.426-435, 2017 (Refereed Journals of Other Institutions) identifier

Su bazlı Si3N4 süspansiyonlarda dispersan miktarının optimizasyonu

Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, vol.31, no.ÖS2, pp.27-32, 2016 (National Refreed University Journal)

51CrV4 yay çeliğinin yüzey özelliklerinin incelenmesi

Metal Dünyası, no.277, pp.93-97, 2016 (National Non-Refereed Journal)

Characterization of the fracture behaviour of X42 microalloyed pipeline steel

INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY, vol.6, no.5, pp.567-577, 2015 (Journal Indexed in ESCI) identifier identifier

Balistik koruma amaçlı polimer esaslı malzemeler ve özellikleri

Military Science and Intelligence, no.77, pp.50-57, 2012 (National Non-Refereed Journal)

Seramik ve seramik matriksli kompozitlerin balistik özellikleri

Military Science and Intelligence, no.75, pp.38-44, 2012 (National Non-Refereed Journal)

Balistik malzemelere bir alternatif sıvı zırh

Military Science and Intelligence, no.78, pp.72-75, 2012 (National Non-Refereed Journal)

Biyometalik malzemelerde mikroyapısal incelemeler

MakinaTek, no.172, pp.388-392, 2012 (National Non-Refereed Journal)

Toz metalurjik bir çeliğin metalografisi ve ısıl işlem etkisi II

Makinatek, no.162, pp.176-178, 2011 (National Non-Refereed Journal)

Toz metalurjik bir çeliğin metalografisi ve ısıl işlem etkisi I

MakinaTek, no.161, pp.258-264, 2011 (National Non-Refereed Journal)

Lastik karışımlarında kullanılan çinko oksit miktarının azaltılması

Kauçuk Dergisi, no.41, pp.16-19, 2011 (National Non-Refereed Journal)

Demir dışı metallerin ve metal matriksli kompozitlerin koruyucu malzeme olarak kullanımı

Military Science and Intelligence, no.74, pp.38-45, 2011 (National Non-Refereed Journal)

Lastik karışımlarında yaşlanma etkilerinin incelenmesi

Pagev Plastik Dergisi, no.106, pp.124-128, 2010 (National Non-Refereed Journal)

Temperlenmiş beynitik bir çeliğin aşınma davranışı

Metal Makina Dergisi, pp.330-334, 2010 (National Non-Refereed Journal) Sustainable Development

Karbon nanotüpler

Pagev Plastik Dergisi, no.96, pp.122-128, 2008 (National Non-Refereed Journal)

Polimer kil nano kompozitleri

Pagev Plastik Dergisi, no.83, pp.144-149, 2005 (National Non-Refereed Journal)

Nano malzemelerin kullanım alanları ve geleceği

Pagev Plastik Dergisi, no.79, pp.92-96, 2005 (National Non-Refereed Journal)

Refereed Congress / Symposium Publications in Proceedings

Effect of zinc oxide level on curing, physical and cord-rubber adhesion properties of tire belt skim compound

Uluslararası Katılımlı VIII. Polimer Bilim ve Teknoloji Kongresi, Malatya, Turkey, 20 - 23 June 2022, pp.78

Rubber-metal adhesion systems

1st International Conference on Applied Engineering and Natural Sciences, Konya, Turkey, 1 - 03 November 2021, pp.572-578

Failure analysis of carbon fiber reinforced PA11 produced by SLS

Additive Manufacturing Conference (AMCTURKEY), Turkey, 17 - 18 October 2019

Thermodynamic modelling of 3C-6Si-1W-1Al ductile cast iron

Metallurgical and Materials Engineering Congress of South-Easr Europe, Belgrade, Serbia, 5 - 07 June 2019, pp.28

Microstructural and thermal characterization of 3.2C-5Si-1W novel ductile cast iron

Metallurgical and Materials Engineering Congress of South-East Europe, Belgrade, Serbia, 5 - 07 June 2019, pp.52

3.2C-5Si-1W yeni nesil sünek dökme demirin mikroyapısal ve mekanik karakterizasyonu

Uluslararası Marmara Fen ve Sosyal Bilimleri Kongresi, 26 - 28 April 2019, pp.1093-1907

Ion plasma nitriding of ferritic steel AISI 430 F

XV. International Scientific Congress Machines, Technologies, Materials 2018, 12 - 15 September 2018

Characterization of medieval glazed ceramics of the East Plain Cilicia Survey

24th EAA - European Association of Archaeologists Annual Meeting, Barselona, Spain, 5 - 08 September 2018, vol.1, pp.259

Characterization of fatigue failed aged Cu-Ni-Si alloys

5th International Conference of Engineering Against Failure, ICEAF-V 2018, Chios, Greece, 20 - 22 June 2018, vol.188 Creative Commons License identifier

Tribological behavior of heat treated CuCrZr alloy

5th International Conference of Engineering Against Failure, ICEAF-V 2018, Chios, Greece, 20 - 22 June 2018, vol.188 Creative Commons License identifier

The effect of layer architecture on the tribological behaviour of coatings

5th International Conference of Engineering Against Failure, Sakız Adası, Greece, 20 - 22 June 2018, vol.188, pp.4016 Creative Commons License identifier

Failure behavior of PA12 based SLS lattice structure with macro-porosity

5th International Conference of Engineering Against Failure, Sakız Adası, Greece, 20 - 22 June 2018, vol.188, pp.3007 Creative Commons License identifier

Characterization of the high temperature oxidation behavior of iron based alloys used as exhaust manifolds

5th International Conference of Engineering Against Failure, ICEAF-V 2018, Chios, Greece, 20 - 22 June 2018, vol.188 Creative Commons License identifier

Tribological properties of copper-chromium-zirconium alloys

VIII. International Metallurgical Congress, Ohrid, Macedonia, 30 May - 03 June 2018, pp.1-5 Creative Commons License

Zırh çeliklerinde balistik darbe nedenli oluşan adyabatik kayma bantlarının incelenmesi

23. Elektron Öikroskopi Kongresi (EMK 2017), Antalya, Turkey, 19 - 21 May 2017, pp.82-83

Tribological behavior of cast CF3 and CF3M austenitic stainless steels

18. International Metallurgy and Materials Congress, 29 September - 01 October 2016

Solid particle erosion behavior of cast CuCrZr alloy

18. International Metallurgy and Materials Congress, 29 September - 01 October 2016

Microstructure and Properties of Age HardenableCu 2 55Ni 0 55Si Alloy

18. International Metallurgy and Materials Congress, 29 September - 01 January 2016

Fractography of aged Cu 2 55Ni 0 55Si 0 25Zr 0 25Cr alloy

1. International Mediterranean Science and Engineering Congress, 26 - 28 October 2016

Su bazlı Si3N4 süspansiyonlarda dispersan miktarının optimizasyonu

1st International Mediterranean Science and Engineering Congress, 26 - 28 October 2016, pp.4250

The Effect of Doping Ag with Pt on the Antibacterial Activity of Biomimetic Functionally Graded Thin Films

3rd International Conference on Bioinspired and Biobased Chemistry and Materials, 16 - 19 October 2016

Improving Osteoconductivity and Antibacterial Properties of PEEK by Coating with Layered Thin Films

3rd International Conference on Bioinspired and Biobased Chemistry and Materials, 16 - 19 October 2016

Nano wrinkling of diamond like carbon thin films on amorphous polycarbonate and semicrystalline polyethylene terephthalate

4th International Congress in Advances in Applied Physics and Materials Science (APMAS 2014), Fethiye, Turkey, 24 - 26 April 2014 Creative Commons License identifier identifier

The Effect of Platinum Doping on the Morphology of Coatings on PEEK

22nd National (Electron) Microscopy Congress (EMK 2015), Turkey, 2 - 04 September 2015

Physical and Mechanical Properties of Rubber Compounds Reinforced by Carbon Fibers Sized with Different Emulsion Agents

4th International Conference of Engineering Against Failure (ICEAF IV)24-26 June 2015, Skiathos, Greece, Volos, Greece, 24 - 26 June 2015

Influence of Doping of Metal Coatings on PEEK to Tribological Behaviour

4th International Conference of Engineering Against Failure, 24 - 26 June 2015

An investigation on the fatigue behaviour of Cu 2 55Ni 0 55Si alloy

IV. International Conference of Engineering Against Fracture, 24 - 26 June 2015

Wear behaviour of hard thin film coated DIN 1 2367 steels used as die materials

IV. International Conference of Engineering Against Fracture, 24 - 26 June 2015

Deprem mühendisliğinde kullanılan şekil hafızalı alaşımlar için fiziksel metalurjik yaklaşımlar

IV. İleri Teknolojiler Çalıştayı, İstanbul, Turkey, 14 - 16 October 2014, vol.1, pp.182-191

AlTiN kaplanmış DIN 1.2999 çeliğinin tribolojisi üzerine kaplama öncesi nitrasyon işleminin etkisi

IV. İleri Teknolojiler Çalıştayı, İstanbul, Turkey, 14 - 16 October 2014, vol.1, pp.167-181

CrMoV çeliği ile A6080 alaşım çiftinin yüksek sıcaklık tribolojik karakteristikleri

IV. İleri Teknolojiler Çalıştayı, İstanbul, Turkey, 14 - 16 October 2014, vol.1, pp.206-217

Evaluation of physical and microstructural properties of a precipitation hardened CuCoNiBe Alloy

VI. International Congress of Metallurgists of Macedonia, 29 May - 01 June 2014, pp.53

Effect of sintering temperature on alumina ceramics produced by tape casting

VI. International Congress of Metallurgists of Macedonia, 25 August 2013 - 01 June 2014, pp.148

Mechanical and microstructural characterization of a precipitation hardened CuCrZr alloy

VI. International Congress of Metallurgists of Macedonia, 29 May - 01 June 2014, pp.54

The characterization of electric arc furnace slag for recycling purposes

VI. International Congress of Metallurgists of Macedonia, 29 May - 01 June 2014, pp.134

Comparison of the structures properties and wear characteristics of heat treated hot work tool steels used as die materials

VI. International Congress of Metallurgist of Macedonia, Ohrid, Macedonia, 30 May - 03 June 2014, vol.1, pp.52

High temperature wear characteristics of surface treated AISI H11 tool steel

6. International Congress of Metallurgist of Macedonia, Ohrid, Macedonia, 30 May - 03 June 2014, vol.1, pp.43

Investigation of the wear performance of nitrided CrN coated DIN 1.2343 hot work tool steels

3rd European Symposium on Friction, Wear and Wear Protection, Karlsruhe, Germany, 6 - 08 May 2014

The Correlation between Elastic Properties and AFM Images of Nanocoatings on Polymers

4th International Advances in Applied Physics and Materials Science Congress & Exhibition, 24 - 27 April 2014

Wear behavior of surface treated X45MoCrV5-3-1 tool steel at room and elevated temperatures

IV. International Advances in Applied Physics and Materials Science Congress and Exhibition, Muğla, Turkey, 24 - 27 April 2014

Investigation of Heat Treatment Effect on the Wear Resistance of AISI H11 Hot Work Tool Steels

7th International Advanced Technologies Symposium (IATS’13), İstanbul, Turkey, 30 October - 01 November 2013, pp.368-373

Wear behavior of new generation powder metallurgical cold work tool steels

Microscopy Congress (MC2013), Regensburg, Germany, 25 - 30 August 2013, pp.684-685

Characterization of the fracture behaviour of X42 microalloyed pipeline steel

III. International Conference of Engineering Against Fracture, Patra, Greece, 23 - 28 June 2013, pp.133-142

A failure analysis of AA5083 mold material used for curing rubber compounds

3rd International Conference of Engineering Against Fracture (ICEAF III), Patra, Greece, 26 - 28 June 2013, pp.143-150

A metallographic study on quenched and tempered steels perforated by ballistic impact

3rd International Conference of Engineering Against Fracture, 26 - 28 June 2013, pp.98-107

Investigation of Dry Sliding Wear Mechanism of GG20 and GG25 Cast Iron Materials Used For Valves

3rd International Conference of Engineering Against Failure (ICEAF III), Kos (İstanköy), Greece, 26 - 28 June 2013, pp.407-413 identifier

THE EFFECT OF HEAT TREATMENTS ON THE WEAR BEHAVIOR OF AISI H11 HOT WORK TOOL STEEL

3. INTERNATIONAL CONFERENCE OF ENGINEERING AGAINST FRACTURE, PROCEEDINGS, Kastoria, Greece, 26 - 28 June 2013, vol.1, pp.117-125

A Study on the Wear Behavior of CuSn10 Cast Bronze Materials Produced by Different Casting Techniques

3rd International Conference of Engineering Against Failure (ICEAF III), Kos (İstanköy), Greece, 26 - 28 June 2013, pp.108-115 identifier

Characterization of Tensile Fracture of a Ferritic Pearlitic Dual Phase Steel Processed in Different Conditions

3rd International Conference of Engineering Against Failure (ICEAF III), Kos (İstanköy), Greece, 26 - 28 June 2013, pp.415-420 identifier

Çökelti sertleştirilmiş Cu Cr Zr alaşımının mikroyapısal karakterizasyonu

21. Ulusal Elektron Mikroskopi Kongresi, Turkey, 28 - 31 May 2013, pp.2

Yeni nesil toz metalurjik soğuk iş takım çeliklerinin aşınma davranışı

III. İleri Teknoloji Çalıştayı (İTÇ2012), İstanbul, Turkey, 4 - 06 October 2012, pp.383-394 Sustainable Development

AISI H11 sıcak iş takım çeliğinin aşinma davranışı üzerine ısıl işlem ve mikroyapı etkisi

III. İleri Teknolojiler Çalıştayı (İTÇ2012), İstanbul, Turkey, 4 - 06 October 2012, pp.279-290 Sustainable Development

Microstructural Characterization of Carbides in a Cast High Speed Steel using Different Metallographic Techniques

21st International Conference on Metallurgy and Materials, Conference Proceedings, Brno, Czech Republic, 23 - 25 May 2012

A microstructural study on CuSn10 bronze produced by sand and investment casting techniques

XXI. International Conference on Metallurgy and Materials (METAL 2012), Brno, Czech Republic, 23 - 25 May 2012

Gas nitriding of a hot work tool steel and its characterization

International Iron Steel Symposium, Karabük, Turkey, 2 - 04 April 2012, pp.257-263

Wear behavior of heat treated DIN 100Cr6 steels

International Iron Steel Symposium, Karabük, Turkey, 02 April 2012, pp.181-186

Wear behavior of heat treated hot work tool steels under dry sliding condition

International Iron Steel Symposium, Karabük, Turkey, 2 - 04 April 2012, pp.196-202

Effect of Matrix Toughness and Grain Orientation on the Fracture Behavior of Steels

II. International Conference on Engineering Against Fracture, 21 - 24 June 2011

Temper beynitik çeliklerin düşük sıcaklık kırılması üzerine fraktografik bir çalışma

IX. Uluslararası Kırılma Konferansı, İstanbul, Turkey, 19 - 21 October 2011, pp.433-441

Mikroalaşımlı X42 boru çeliğinin kırılma davranışı

IX. Uluslararası Kırılma Konferansı, İstanbul, Turkey, 19 - 21 October 2011, pp.621-632

Su verilmiş ve temperlenmiş çeliklerde kırılmaya mikroyapı, kalıntı ve birincil karbür etkisi

IX. Uluslararası Kırılma Konferansı, İstanbul, Turkey, 19 - 21 October 2011, pp.442-452

Kaynaklanmış temper beynitik bir çelikte hasar analizi

IX. Uluslararası Kırılma Konferansı, İstanbul, Turkey, 19 - 21 October 2011, pp.462-472

An examination of cobalt effect on heat treated powder metallurgical tool steels

VI. International Powder Metallurgy Conference , Ankara, Turkey, 5 - 09 October 2011, pp.193-198

Microstructural characterization of powder metallurgical tool steels etched by different techniques

VI. International Powder Metallurgy Conference & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.94-100

Effect of heat treatment on the mechanical properties and corrosion behavior of a low boron steel

17th International Symposium on Boron, Borides and Related Materials, 11 - 17 September 2011, pp.142

A transmission electron microscope study on a dynamically loaded low boron sheet steel

17th International Symposium on Boron, Borides and Related Materials, İstanbul, Turkey, 11 - 17 September 2011, pp.127

The effects of microstructure and processing defects on the tensile and impact fracture behavior of a welded bainitic steel

2nd International Conference of Engineering Against Fracture (ICEAF II), Patras, Greece, 22 - 24 June 2011

Elektrod ark kaynak yöntemi ile kaynaklanmış temper beynitik bir çelikte mikroyapısal ve fraktografik incelemeler

VI. Uluslararası İleri Teknolojiler Sempozyumu, Elazığ, Turkey, 16 - 18 May 2011, vol.8, pp.492-497

Gaz nitrasyon ile yüzeyleri sertleştirilmiş AISI 4140 ve DIN 1 2344 çeliklerinde mikroyapısal karakterizasyon

VI. Uluslararası İleri Teknolojiler Sempozyumu, Elazığ, Turkey, 16 - 18 May 2011, vol.8, pp.498-502

Elektrik ark fırını curufunun grit malzemesi olarak geri kazanımı

V. Demir Çelik Kongresi, Karabük, Turkey, 1 - 03 April 2011, pp.81-89

A wear study on high chromium alloy cast iron under dry sliding conditions

5th International Conference on Advances in Mechanical Engineering and Mechanics (ICAMEM 2010), Tunis, Tunisia, 18 - 20 December 2010, pp.1-6

Effect of hardness on wear behavior of a tempered bainitic steel

15th International Metallurgy & Materials Congress, 11 - 13 November 2010, pp.1211-1219

Corrosion behavior of a tempered bainitic steel a study on microstructural changes

15th International Metallurgy & Materials Congress, İstanbul, Turkey, 11 - 13 November 2010, pp.429-438

Çinko oksit tipinin stiren butadien kauçuk SBR karışımlarının yaşlanma özellikleri üzerine etkisi

3.Ulusal Polimer Bilim ve Teknoloji Kongresi ve Sergisi, Turkey, 12 - 14 May 2010, pp.44-52

Etilen propilen dien monomer EPDM kauçuk karışımlarının yaşlanma özellikleri

3.Ulusal Polimer Bilim ve Teknoloji Kongresi ve Sergisi, Turkey, 12 - 14 May 2010, pp.61-69

Çökelti sertleştirilmiş bir çelikte sertliğin aşınma üzerine etkisi

İleri Teknolojiler Çalıştayı ve Sergisi, Kocaeli, Turkey, 30 April 2010, pp.31-36 Sustainable Development

Utilization of ultrafine dispersed diamond for enhancement of ballistic performance of vinyl ester glass fiber composite

International Conference on Nanomaterials and Nanosystems, İstanbul, Turkey, 10 - 13 August 2009, pp.24

Elektrik ark fırını curufunun grit malzemesi olarak kullanımı için karakterizasyonu

Uluslararası Katılımlı 19.Ulusal Elektron Mikroskopi Kongresi, Trabzon, Turkey, 22 - 25 June 2009, pp.73

Utilization of ultrafine dispersed diamond as a rubber reinforcing material

4th Nanoscience and Nanotechnology Conference, İstanbul, Turkey, 9 - 13 June 2008, pp.135

Utilization of nanocrystalline diamond powder in rubber compounds as a novel reinforcing material

13th International Conference on Applied Mechanics and Mechanical Engineering, Kahire, Egypt, 27 - 29 May 2008, pp.1-7

Nano kristalin elmas tozunun lastik karışımlarında takviye amaçlı kullanımı

3.Savunma Teknolojileri Kongresi, Turkey, 29 - 30 June 2006, pp.513-523

Nano kristalin elmas tozunun özellikleri ve elastomer teknolojisinde kullanımı

4. Uluslararası Toz Metalurjisi Konferansı, Sakarya, Turkey, 18 - 22 May 2005, pp.487-494

Dynamical scaling of a Ni Si alloy undergoing phase separation

International Symposium on Dynamics of Ordering Processes in Condensed Matter, Kyoto, Japan, 01 January 1988, pp.245-250

Kinetics of phase separation and dynamical scaling in a supersaturated Ni-Si alloy

International Conference on Phase Transformations, Cambridge, England, 5 - 10 July 1987

In situ x ray diffraction study of the kinetics of ordering in the alloy CuAu

TMS-AIME Fall Meeting, Toronto, Canada, 13 - 17 October 1985, pp.7

A small angle neutron scattering study of decomposition dynamics in Ni87.5Si12.5

American Crystallographic Association Annual Meeting, California, United States Of America, 18 - 23 August 1985

In situ x ray diffraction study of diffusion controlled coarsening kinetics in an Ni Si alloy

TMS-AIME Fall Meeting, Detroit, United States Of America, 16 - 20 September 1984, pp.26

Diffusion examined by diffraction

TMS-AIME Fall Meeting, Detroit, United States Of America, 16 - 20 September 1984, pp.36

Books & Book Chapters

Antibakterielle und knochenwachstumsfördernde Beschichtungen für Bandscheibenimplantate

in: Jahrbuch Oberflaechentechnik, Timo Sörgel, Editor, Leuze Verlag, Ulm, pp.211-220, 2016

Expert Reports

Hasar Analizi

Uzer Makina ve Kalıp San. A.Ş., pp.7, Kocaeli, 2019

Yüzey Analizi

Uzer Makina ve Kalıp San. A.Ş., pp.8, Kocaeli, 2019

Metallurgical Analyses

Castolin Kaynak Ltd., pp.4, İstanbul, 2017

Hasar Analizi

Teknorot Otomotiv Ürünleri San. ve Tic. A.Ş, pp.9, Düzce, 2017

Metalurjik Analiz

Sağlam Metal San. ve Tic. A.Ş., pp.6, Kocaeli, 2016

Hasar Analizi

TT ÇELİKYAY Otomotiv Dış Ticaret A.Ş , pp.6, Düzce, 2016

Termal Analiz

Sağlam Metal San. ve Tic. A.Ş., pp.4, Kocaeli, 2016

Hasar Analizi

TT ÇELİKYAY Otomotiv Dış Ticaret A.Ş , pp.7, Düzce, 2016

Mekanik ve Metalurjik Analiz

Sincanlı Oto ve Traktör Grç. Tic. ve San. A.Ş., pp.8, Sakarya, 2016

Metalurjik Analiz

TT ÇELİKYAY Otomotiv Dış Ticaret A.Ş , pp.8, Düzce, 2016

Metalurjik Analiz

TT ÇELİKYAY Otomotiv Dış Ticaret A.Ş , pp.8, Düzce, 2016

Hasar Analizi

Otokar Otomotiv ve Savunma Sanayi A.Ş., pp.30, Sakarya, 2016

Metalurjik Analiz

Sincanlı Oto ve Traktör Grç. Tic. ve San. A.Ş., pp.2, Sakarya, 2015

Failure Analysis

Makyay Makine ve Yay San. Tic. Ltd. Şti, pp.7, İstanbul, 2015

Metallurgical Analyses

Castolin Kaynak Ltd., pp.10, Kocaeli, 2015

Mekanik ve Metalurjik Analiz

Arçelik A.Ş Çamaşır Makinası İşletmesi, pp.4, İstanbul, 2015

Metalurjik Analiz

Arçelik A.Ş Çamaşır Makinası İşletmesi, pp.6, İstanbul, 2015

Hasar Analizi

Teknorot Otomotiv Ürünleri San. ve Tic. A.Ş., pp.9, Düzce, 2015

Hasar Analizi

Teknorot Otomotiv Ürünleri San. ve Tic. A.Ş, pp.7, Düzce, 2015

Hasar Analizi

TT Çelikyay Otomotiv Dış Tic. San. A.Ş., pp.8, Düzce, 2014