SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
Development of bone chip-vacuum system in orthopedic drilling process
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING
, cilt.43, sa.4, 2021 (SCI-Expanded)
Evaluation of new hip prosthesis design with finite element analysis
AUSTRALASIAN PHYSICAL & ENGINEERING SCIENCES IN MEDICINE
, cilt.42, ss.1033-1038, 2019 (SCI-Expanded)
Fatigue Performance Evaluations of Vehicle Toroidal Liquefied Petroleum Gas Fuel Tanks
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
, cilt.139, sa.4, 2017 (SCI-Expanded)
Development of a new driller system to prevent the osteonecrosis in orthopedic surgery applications
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING
, cilt.37, sa.2, ss.549-558, 2015 (SCI-Expanded)
Failure analysis of support during profile cutting process using horizontal milling machine
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
, cilt.70, ss.1169-1179, 2014 (SCI-Expanded)
Burst Pressure Determination of Vehicle Toroidal Oval Cross-Section LPG Fuel Tanks
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
, cilt.133, sa.3, 2011 (SCI-Expanded)
Comparison of 3D and 2D models editing process in pre osteotomy planning
Journal Of Biomechanics
, cilt.44, ss.18, 2011 (SCI-Expanded)
Minimum material design for propane cylinder end closures
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
, cilt.130, sa.1, 2008 (SCI-Expanded)
Bottom end-closure design optimization of DOT-39 non-refillable refrigerant cylinders
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
, cilt.127, sa.2, ss.112-118, 2005 (SCI-Expanded)
Determination of burst pressure and location of the DOT-39 refrigerant cylinders
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
, cilt.123, sa.2, ss.240-247, 2001 (SCI-Expanded)
Diğer Dergilerde Yayınlanan Makaleler
Determination of The Hip Stem Loosening Using Vibration Method
European Journal of Engineering and Natural Sciences
, cilt.3, sa.1, ss.73-77, 2019 (Hakemli Dergi)
Ön Kol Kaslarında Kavrama Esnasında Oluşan Kuvvetin EMG Sinyalleri ile Belirlenmesi ve Analizi
Düzce ÜniversitesiBilim ve Teknoloji Dergisi
, cilt.5, sa.2, ss.455-465, 2017 (Hakemli Dergi)
Mandibula Kırıklarında Kullanılan I Tipi Plakların Tespit Konumlarının Karşılaştırılması
Düzce Üniversitesi Bilim ve Teknoloji Dergisi
, cilt.2, ss.207-2014, 2014 (Hakemli Dergi)
EFFECTS OF SALTER PELVIC OSTEOTOMY ANGLE ON CONTACT AREA AND PRESSUREDISTRIBUTION IN THE HIP JOINT: AN EXPERIMENTAL STUDY
Süleyman Demirel ÜniversitesiMühendislik Bilimleri ve Tasarım Dergisi
, cilt.2, sa.2, ss.243-245, 2014 (Hakemli Dergi)
Lag Vidasının Farklı Sabitleme Pozisyonunda Dinamik Kalça Çivisi ile Tedavi Edilen İntertrokanterik Femoral Kırıklarının Kararlılığı
Düzce Üniversitesi Bilim ve Teknoloji Dergisi
, cilt.1, sa.1, ss.120-129, 2013 (Hakemli Dergi)
The rotational loading capacity and effects of fibula on lower exterimity
Journal of Engineering Research and Applied Science
, cilt.2, ss.138-141, 2013 (Hakemli Dergi)
Cerrahi Öncesi Planlamada Üç Boyutlu Simülasyon ve İki Boyutlu Resim Editörü Programlarının Karşılaştırılması
İleri Teknoloji Bilimleri Dergisi
, cilt.1, ss.80-86, 2012 (Hakemli Dergi)
Comparation of three Dimensional Simulation and Dimensional Image Editor Softwares at the pre Surgery Planning
Journal of Advanced Technology Sciences
, cilt.1, ss.80-86, 2012 (Hakemli Dergi)
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar
Experimental Investigation of the Effect of Screw Production Method on Mechanical Resistance In Different Materials
2. INTERNATIONAL ENERGY AND ENGINEERING CONFERENCE 2017, 12 - 13 Ekim 2017
The Effect of Cement on Hip Stem Fixation A Biomechanical Study
Uluslararası Katılımlı 8. Ulusal Biyomekanik Kongresi, Ankara, Türkiye, 19 - 23 Ekim 2016
EFFECTS OF SALTER PELVIC OSTEOTOMY ANGLE ON CONTACT AREA AND PRESSURE DISTRIBUTION IN THE HIP JOINT: AN EXPERIMENTAL STUDY
VII. National Biomechanics Congress with International Participation, Isparta, Türkiye, 16 - 18 Ekim 2014
Mekanik testlerin Biyomekanik Uygulamalar İçin Değerlendirilmesi
2. Ulusal Tasarım İmalat ve Analiz Kongresi - TİMAK", Türkiye, 11 - 12 Kasım 2010
Ooferektomi uygulanan sıçanlara Travmatik Beyin Hasarının etkisinin araştırılması Deneysel Çalışma
Ulusal Türk Ortopedi ve Travmatoloji Kongresi XXI, Çeşme, Türkiye, 3 - 08 Kasım 2009
Effects of Fibula and Talus on the Tibial Stress Distribution
EnginSoft International Conference 2009, Bergamo, İtalya, 1 - 02 Ekim 2009
Effects of botox on fracture healing after traumatic brain injury An experimental study on rats
10TH EFORT CONGRESS (10th Congress of The European Federation of Nat. Associations of Orthopaedics and Traumatology), Vienna, Avustralya, 3 - 06 Haziran 2009
SONLU ELEMANLAR TABANLI ANALİZ İÇİN BİYOMEKANİK MODEL OLUŞTURMA TEKNİKLERİ
5. Uluslararası İleri Teknolojiler Sempozyumu (IATS’09), 13 - 15 Mayıs 2009
KIRIK YLESMES SONRASI SIÇAN UYLUK KEMGNN MUKAVEMET KONTROLÜ
FIGES 13th Conference for Computer Aided Engineering and System Modeling with Exhibition, Antalya, Türkiye, 6 - 07 Kasım 2008
Sıçanlarda Travmatik Beyin Hasarının Kırık İyileşmesine Etkisi
IV. ULUSAL BİYOMEKANİK KONGRESİ, Erzurum, Türkiye, 16 - 17 Ekim 2008