Assoc. Prof. MUSTAFA ÖZGÜR BORA

International Conferences on Science and Technology Engineering Sciences and Technology ICONST EST 2021, Budva, Montenegro, 08 September 2021, pp.203-213

INVESTIGATION OF INTERLAMINAR STRENGTH OF FIBER METAL LAMINATES INCLUDING 6061-T4 ALUMINUM SHEET SURFACES PROCESSED WITH FIBER LASER TECHNIQUE

AKSÜT R., BORA M. Ö., AKMAN E.

7th International Congress on Engineering, Architecture and Design, Ankara, Turkey, 21 - 22 May 2021, pp.789-797

DESIGN AND ANALYSIS OF THERMOPLASTIC PREPREG BASED HEAVY COMMERCIAL VEHICLE SEAT

BİRÇİÇEK S., BORA M. Ö., ARKIN E., YAKAR B., ERTÜRK E., GÖDEK E.

International Conference on Technology, Engineering and Science (IConTES), Antalya, Turkey, 29 October - 01 November 2020, vol.11, pp.98-105

EFFECT OF THERMAL CYCLES ON FLEXURAL BEHAVIOR OF AL/AL HONEYCOMB SANDWICH STRUCTURES

KURT E., BORA M. Ö., SÜSLER S., TÜRKMEN H. S., AKAGÜNDÜZ E.

International Conference on Technology, Engineering and Science (IConTES), Antalya, Turkey, 29 October - 01 November 2020, vol.11, pp.89-97

INVESTIGATION OF THE EFFECT OF VARYING LASER SCRIBE SIZES ON THE ADHESION PERFORMANCE OF THE AA2024-T3/CFRP JOINTS DEPENDING ON THE NUMBER OF LASER SCAN REPEATS

aybalık s., ÇOBAN O., BORA M. Ö., AKMAN E., GENÇ ÖZTOPRAK B.

International Conference on Technology, Engineering and Science (IConTES), 29 October - 01 November 2020

The Effect of Cataphoresis Coating on Fatigue Behaviour of Control Arms under Corrosion Environment

UÇAN C., BORA M. Ö., ÇOBAN O.

IConTES 2019: International Conference on Technology, Engineering and Science, Antalya, Turkey, 26 - 29 October 2019, vol.7, pp.212-219

Shear Strength Performance Evaluation of Al/CFRP Adhesive Bonded Joints with Various Silane Treatments at Aluminum Surfaces

BORA M. Ö., ÇOBAN O., KUTLUK T., AKMAN E., GENÇ ÖZTOPRAK B.

International Conference on Engineering Technologies (ICENTE’xx19), Konya, Turkey, 25 - 27 October 2019, pp.270-273

Evaluation of Different Surface Treatment Methods Applied to Improve the Chemical Adhesion Mechanism of Al/CFRP Adhesive Bonding

GENÇ ÖZTOPRAK B., ÇOBAN O., AKMAN E., BORA M. Ö., KUTLUK T.

International Conference on Engineering Technologies (ICENTE’xx19), Konya, Turkey, 25 - 27 October 2019, pp.274-279

Surface Preparation of the Al 2024 Alloy for Adhesive Bonding of Al/ CFRP Using Fiber Laser Treatment

AKMAN E., BORA M. Ö., ÇOBAN O., GENÇ ÖZTOPRAK B.

International Conference on Engineering Technologies (ICENTE’xx19), Konya, Turkey, 25 - 27 October 2019, pp.285-288

FPL Etching Parameter Optimization for Adhesion Performance of Al/CFRP Adhesive Joints

ÇOBAN O., BORA M. Ö., GENÇ ÖZTOPRAK B., AKMAN E., KUTLUK T.

International Conference on Engineering Technologies (ICENTE’xx19), Konya, Turkey, 25 - 27 October 2019, pp.280-284

IMPROVING INTERFACE BETWEEN POLYESTER CORD AND RUBBER COMPOUND BY USING REACTIVE LIQUID RUBBERS

çeltik f., ersoy t., erenkaya m., BORA M. Ö., KARAAĞAÇ B.

Physical Organic Chemistry (GRS) Gordon Research Seminar, Understanding and Exploiting Structure, Function and Theory in Organic Chemistry, 22 - 23 June 2019

SPECTROSCOPIC SURFACE INVESTIGATION OF LASER TREATED CFRPS TO ACHIEVE OPTIMUM ADHESIVE BONDING

BORA M. Ö., GENÇ ÖZTOPRAK B., AKMAN E., ÇOBAN O., DEMİR A.

THEINTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY ANDINNOVATION, 7 - 11 March 2018, pp.9

NOVEL SURFACE STRUCTURING OF CFRPS FOR ADHESIVE BONDING: EFFECT OF LASER INDUCED SCRIBE PATTERN ANGLE ON ADHESION STRENGTH

ÇOBAN O., AKMAN E., BORA M. Ö., GENÇ ÖZTOPRAK B., DEMİR A.

II INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND INNOVATION, 7 - 11 March 2018, pp.12

EFFECTS OF THE LASER WAVELENGTH ON THE PRE-TREATMENT OF CARBON FIBER-REINFORCED PLASTICS FOR ADHESIVE JOINT

ÇOBAN O., ERDOĞAN Y., AKMAN E., BORA M. Ö., GENÇ ÖZTOPRAK B., DEMİR A.

II INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND INNOVATION, 7 - 11 March 2018, pp.11

EFFECT OF MECHANICAL INTERLOCKING WITH VARIOUS MICRO HOLE FORMATIONS ON THE ADHESIVE BONDING STRENGTH OF CFRP/CFRP JOINTS

BORA M. Ö., ERDOĞAN Y., AKMAN E., ÇOBAN O., GENÇ ÖZTOPRAK B., DEMİR A.

II INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND INNOVATION, 7 - 11 March 2018, pp.10

The effect of flexural strain rates on the flexural behavior of 4/3 GLARE fiber metal laminated composites

FİDAN h., BORA M. Ö., ÇOBAN O., AKAGÜNDÜZ e.

5th INTERNATIONAL POLYMERIC COMPOSITES SYMPOSIUM AND WORKSHOPS, 2 - 04 November 2017, pp.194-200

Laser Structuring of CFRP Surface for Adhesive Bonding Using Michelson Interferometer and Laser Beam

ERDOĞAN Y., AKMAN E., ÇOBAN O., BORA M. Ö., GENÇ ÖZTOPRAK B., DEMİR A.

Turkish Physical Society 33rd International Physics Congress, 6 - 10 September 2017, pp.512

Study Of Laser Induced Micro-Hole Configuration In Order To Exploit Mechanical Interlocking Effect On Adhesive Bonding

BORA M. Ö., AKMAN E., ÇOBAN O., GENÇ ÖZTOPRAK B., DEMİR A.

III INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS), 3 - 07 May 2017, pp.864-869

Investigation of laser induced line pattern surface structuring effect on adhesive bonding of CFRP aircraft composites

ÇOBAN O., AKMAN E., BORA M. Ö., GENÇ ÖZTOPRAK B., DEMİR A.

III INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS), 3 - 07 May 2017, pp.1084-1089

Effect of Bondline Thickness on Adhesive Bonding of Laser Treated Carbon Fiber Reinforced Composites

AKMAN E., ERDOĞAN Y., BORA M. Ö., ÇOBAN O., GENÇ ÖZTOPRAK B., DEMİR A.

III INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS), 3 - 07 May 2017, pp.1080-1083

Analysis of Laser Treated CFRP Surfaces by Laser-InducedBreakdown Spectroscopy

GENÇ ÖZTOPRAK B., AKMAN E., ÇOBAN O., BORA M. Ö., DEMİR A.

CSI XL - IX EMSLIBS, 11 - 16 June 2017, pp.257

Scratch Deformation Characteristics of Calcium Carbonate Filled High Density Polyethylene Composites

BORA M. Ö., ÇOBAN O., KUTLUK T., AKAGÜNDÜZ E.

ICAIE International Conference on Advances and Innovations in Engineering, 10 - 12 May 2017, pp.852-855

A study on thermal behavior of volcanic particle filled high-density polyethylene

ÇOBAN O., BORA M. Ö., KUTLUK T.

ICAIE International Conference on Advances and Innovations in Engineering, 10 - 12 May 2017, pp.848-851

THE INFLUENCE OF SINGLE LOW VELOCITY IMPACTS ONREPAIRED HONEYCOMB SANDWICH STRUCTURES

BALCI O., ÇOBAN O., BORA M. Ö., AKAGÜNDÜZ E., YALÇİN E. B.

16th International Materials Symposium (IMSP’2016), 12 - 14 October 2016, pp.1630-1637

IMPACT BEHAVIOR OF SINGLE IMPACTED HONEYCOMBSANDWICH STRUCTURES

AKTAŞ M., BORA M. Ö., ÇOBAN O., AKAGÜNDÜZ E., YALÇİN E. B.

16th International Materials Symposium (IMSP’2016), 12 - 14 October 2016, pp.874-881

A STUDY ON THERMAL PROPERTIES OF VOLCANIC PARTICLE FILLED POLY LACTIC ACID POLY BUTYLENE ADIPATE COTEREPHTHALATE COMPOSITE

KUTLUK T., ÇOBAN O., BORA M. Ö., ÖZKOÇ G.

16th International Materials Symposium (IMSP’2016), 12 - 14 October 2016, pp.109-116

THE INFLUENCE OF REPEATED LOW VELOCITY IMPACTS ONHONEYCOMB SANDWICH STRUCTURES

AKTAŞ M., BORA M. Ö., ÇOBAN O., AKAGÜNDÜZ E., YALÇİN E. B.

16th International Materials Symposium (IMSP’2016), 12 - 14 October 2016, pp.1623-1629

A NUMERICAL INVESTIGATION ON THERMAL CONDUCTIVITYOF SILICONE NITRATE SILICONE RUBBER COMPOSITE

BİLGİN F., ARICI M., BORA M. Ö., ÇOBAN O.

IMSP’201616th International Materials Symposium, 12 - 14 October 2016, pp.79-86

THE INFLUENCE OF VOLCANIC PARTICLES ON MECHANICAL PROPERTIES OF POLY LACTIC ACID POLY BUTYLENE ADIPATE COTEREPHTHALATE BLENDS

BORA M. Ö., ÇOBAN O., KUTLUK T., ÖZKOÇ G.

16th International Materials Symposium (IMSP’2016), 12 - 14 October 2016, pp.1638-1645

THE EFFECT OF REPEATEDLY IMPACTS ON IMPACTPROPERTIES OF REPAIRED HONEYCOMB SANDWICHSTRUCTURES

BALCI O., ÇOBAN O., BORA M. Ö., AKAGÜNDÜZ E., YALÇİN E. B.

16th International Materials Symposium (IMSP’2016), 12 - 14 October 2016, pp.1603-1610

The Influence Of Volcanıc Partıcles On Mechanıcal Propertıes Of Poly Lactıc Acıd Poly Butylene Adıpate Coterephthalate Blends

ÇOBAN O., BORA M. Ö., KUTLUK T., ÖZKOÇ G.

16th International Materials Symposium, 12 - 14 October 2016

A Study On Thermal Propertıes Of Volcanıc Partıcle Fılled Poly Lactıc Acıd Poly Butylene Adıpate Co Terephthalate Composıte

KUTLUK T., ÇOBAN O., BORA M. Ö., ÖZKOÇ G.

16th International Materials Symposium, 12 - 14 October 2016

The influence of volcanic particles on mecchanical properties of PLA PBAT Blends

ÇOBAN O., BORA M. Ö., KUTLUK T., ÖZKOÇ G.

16th internatioanl materials symposium, Denizli, Turkey, 12 - 14 October 2016

A study on thermal properties of volcanic particle filled PLA PBAT composites

KUTLUK T., ÇOBAN O., BORA M. Ö., ÖZKOÇ G.

16th International materials symposium, Denizli, Turkey, 12 - 14 October 2016

Erosive Wear Of Volcanic Ash Reinforced Polyphenylene Sulfide Composites

FİDAN S., ÇOBAN O., BORA M. Ö., SINMAZÇELİK T.

ICEAF 4th International Conference of Engineering Against Failure, 24 - 26 June 2015

Thermal and Dynamic Mechanical Properties of Volcanic Ash Reinforced Polyphenylene sulfide Composites

ÇOBAN O., BORA M. Ö., FİDAN S., SINMAZÇELİK T.

4th International Conference of Engineering Against Failure (ICEAF IV), 24 - 26 June 2015, pp.105-112

Thermal and dynamic mechanical properties of volcanic ash reinforced polyphenylene sulphide composites

ÇOBAN O., BORA M. Ö., FİDAN S., SINMAZÇELİK T.

4 th International conference of engineering against failure (ICEAF IV) Skiathos, Greece, 24 - 26 June 2015

Micro computed tomography characteriazation of volcanic ash particles used as reinforcement in poyphenylenesulphide composites

FİDAN S., ÇOBAN O., BORA M. Ö., SINMAZÇELİK T.

4 th International conference of engineering against failure (ICEAF IV) Skiathos, Greece, 24 - 26 June 2015

Erosive wear of volcanic ash reinforced polypropylene sulphide composites

FİDAN S., ÇOBAN O., BORA M. Ö., SINMAZÇELİK T.

4 th International conference of engineering against failure (ICEAF IV) skiathos, greece, 24 - 26 June 2015

Influence of Volcanic Ash Filler Content on Mechanical Properties of Polyphenylene Sulfide Composites

BORA M. Ö., ÇOBAN O., FİDAN S., SINMAZÇELİK T.

4th International Conference of Engineering Against Failure (ICEAF IV), 24 - 26 June 2015, pp.76-84

Erosive Wear of Volcanic Ash Reinforced Polypropelene Sulfide Composites

FİDAN S., ÇOBAN O., BORA M. Ö., SINMAZÇELİK T.

4th International Conference of Engineering Against Failure (ICEAF IV), Skiathos, Greece, 24 - 26 June 2015, pp.62-67

Micro Computed Tomography Characterization of Volcanic Ash Particles Used as Reinforcement in Polyphenylene Sulfide Composites

FİDAN S., ÇOBAN O., BORA M. Ö., SINMAZÇELİK T.

4th International Conference of Engineering Against Failure (ICEAF IV), 24 - 26 June 2015, pp.85-90

Influence of volcanic ash filler content on mechanical properties of Polyphenylene Sulphide Composites

BORA M. Ö., ÇOBAN O., FİDAN S., SINMAZÇELİK T.

4 th International conference of engineering against failure (ICEAF IV) Skiathos, Greece, 24 - 26 June 2015

Effect of Silane as Coupling Agent on Dynamic Mechanical Properties of Volcanic Ash Filled PPS Composites

ÇOBAN O., BORA M. Ö., KUTLUK T., FİDAN S., SINMAZÇELİK T.

5. International Advances in Applied Physics and Materials Science Congress&Exhibition (APMAS2015), Fethiye, Turkey, 16 - 19 April 2015, pp.105

Silane Coupling Efficiency on Thermal Properties of Volcanic Ash Filled PPS Composites

KUTLUK T., ÇOBAN O., BORA M. Ö., FİDAN S., SINMAZÇELİK T.

5. International Advances in Applied Physics and Materials Science Congress&Exhibition (APMAS2015), Fethiye, Turkey, 16 - 19 April 2015, pp.108

Surface Modification Effect of Volcanic Ash Particles Using Silane Coupling Agent on Mechanical Properties of Polyphenylene Sulfide Composites

BORA M. Ö., ÇOBAN O., FİDAN S., KUTLUK T., SINMAZÇELİK T.

5. International Advances in Applied Physics and Materials Science Congress&Exhibition (APMAS2015), Fethiye, Turkey, 16 - 19 April 2015, pp.106

Silan coupling agent effect on solid particle erosion behavior of volcanic ash filled PPS composites

FİDAN S., ÇOBAN O., BORA M. Ö., KUTLUK T., SINMAZÇELİK T.

5 th International advances in Applied Physics and Materials Science Congress & Exhibition (APMAS2015), 16 - 19 April 2015

Surface modification Effect of Volcanic Ash Particles Using Silane Coupling Agent on Mechanical Properties of Polyphenylenesulphide composites

BORA M. Ö., ÇOBAN O., FİDAN S., KUTLUK T., SINMAZÇELİK T.

5 th International Advances in Applied and Materials Science Congress & Exhibition (APMAS 2015), 16 - 19 April 2015

Silane Coupling Agent Effect on Solid Particle Erosion Behavior of VolcanicAsh Filled PPS Composites

SİNAN F., ÇOBAN O., BORA M. Ö., KUTLUK T., SINMAZÇELİK T.

5th International Advances in Applied Physics and Materials Science Congress & Exhibition (APMAS2015), 16 - 19 April 2014

Process Optimization of PPS by Using Taguchi Method for Erosive Behavior Microcompounding and İnjection Molding

FİDAN S., ÇOBAN O., BORA M. Ö., ÖZCAN B., SINMAZÇELİK T., BORA M. Ö.

15 th International Materials Symposium, 15 - 17 October 2014

Process Optimization of PPS by Using Taguchi Method for Thermomechanical Properties Microcompounding and Injection Molding

AYMERGEN V., ÇOBAN O., BORA M. Ö., FİDAN S., ÖZCAN B., SINMAZÇELİK T.

15 th International Materials Symposium, 15 - 17 October 2014

Process Optimization of PPS by Using Taguchi Method for Flexural Properties Microcompounding and İnjection Molding

ABDULKADİR K., ÇOBAN O., BORA M. Ö., FİDAN S., ÖZCAN B.

15 th International Materials Symposium, 15 - 17 October 2014

Process Optimization of PPS by Using Taguchi Method for Thermal Properties Microcompounding and Injection Molding

AYMERGEN V., ÇOBAN O., BORA M. Ö., FİDAN S., ÖZCAN B., SINMAZÇELİK T.

15 th International Materials Symposium, 15 - 17 October 2014

Computerized tomography characterization of low velocity impact damage in glass fiber reinforced polyester composite

AVCU E., FİDAN S., BORA M. Ö., ÇOBAN O., SINMAZÇELİK T.

14th International Materials Symposium (IMSP’2012), 10 - 12 October 2012

Detecting Impact Damages In An Aramid/Glass Fiber Reinforced Hybrid Composite With Micro Tomography

FİDAN S., SINMAZÇELİK T., AVCU E., BORA M. Ö., ÇOBAN O.

14th International Conference on Advances in Materials and Processing Technologies (AMPT), İstanbul, Turkey, 13 - 16 July 2011, vol.445, pp.9-10

Solid particle erosive wear behavior of ductile, semi-ductile and brittle materials: Influence of particle impingement angle and velocity

AVCU E., FİDAN S., BORA M. Ö., ÇOBAN O., SINMAZÇELİK T., Taskiran I.

9th International Conference on Advances and Trends in Engineering Materials and their Applications, AES-ATEMA'2011, Montreal, Canada, 1 - 05 August 2011, pp.123-133