Yayınlar & Eserler

Yayın Ağı
Makaleler 84
Tümü (84)
SCI-E, SSCI, AHCI (67)
SCI-E, SSCI, AHCI, ESCI (72)
Scopus (75)
TRDizin (2)
Diğer Yayınlar (7)

1. Effect of thermo-mechanical treatments on the structural properties and tribological behavior of precipitation hardenable Cu-4Ti (wt%) alloy

Konieczny J., Labisz K., Atapek Ş. H., Fidan S., Bora M. Ö., Ürgün S.
TRIBOLOGY INTERNATIONAL , cilt.214, 2026 (SCI-Expanded) identifier

2. Determination of upper limits of crack formation in surface hardening of Ti6Al4V by low power fiber laser parameter optimization in air and nitrogen environment

Akman E., Bora M. Ö., Fidan S.
OPTICS AND LASER TECHNOLOGY , cilt.192, 2025 (SCI-Expanded) identifier identifier

3. Tribological Performance of Glass/Kevlar Hybrid Epoxy Composites: Effects of Pressurized Water-Immersion Aging Under Reciprocating Sliding Wear

Özsoy M. İ., Bora M. Ö., Ürgün S., Fidan S., Güleç E.
Polymers , cilt.17, sa.21, ss.1-32, 2025 (Hakemli Dergi) Creative Commons License

4. Effect of laser induced remelting on the scratch behavior of spark plasma sintered nickel aluminide alloy

Aktaş Çelik G., Aksu F., Yılmaz Güler F. B., Ürgün S., Fidan S., Bora M. Ö., et al.
Materials Chemistry and Physics , cilt.345, 2025 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

5. Stabilizing effect of sepiolite in the preparation of flame-resistant expanded perlite/semi-rigid polyurethane foam composites

Guliyev R., TEKİN N., BORA M. Ö., Yağcı Y. E.
Polymer International , cilt.74, sa.11, ss.1014-1025, 2025 (SCI-Expanded) identifier identifier

6. Scratch Resistance and Tribological Enhancement of Epoxy Composites Reinforced with Chopped Glass Fiber and Nano Silica Through Taguchi Analysis

Ozun E., Ceylan R., Bora M. Ö., Fidan S., Ürgün S., Özsoy M. İ., et al.
POLYMERS , cilt.17, sa.2550, ss.1-20, 2025 (Scopus)

7. Tribological Response of Glass Fiber/Polyester Composites After Pressurized Water-Immersion Aging Assessed by Reciprocating and Ball-on-Disc Wear Testing

Fidan S., Ürgün S., Özsoy M. İ., Bora M. Ö., Güleç E.
Polymers , cilt.1, sa.1, ss.1-36, 2025 (Scopus) identifier identifier identifier

8. Machinability of Basalt and Glass Fiber Hybrid Composites in Dry Drilling Using TiN/TiAlN-Coated Drill Bits

Özsoy M. İ., Ürgün S., Fidan S., Yarar E., Güleç E., Bora M. Ö.
Polymers , cilt.17, sa.2172, ss.1-33, 2025 (Scopus) Creative Commons License identifier identifier identifier

9. Improvement of Mechanical and Thermal Properties of Semirigid Polyurethane Foam by the Addition of Cellulose Sulfate

Guliyev R., TEKİN N., BORA M. Ö., Yagci Y. E.
POLYMER ENGINEERING AND SCIENCE , cilt.65, ss.3940-3950, 2025 (SCI-Expanded) identifier identifier

10. Characterization of laser surface burns generated with different fiber laser parameters: the role of air and nitrogen environments

Yüşen A., Fidan S., Ürgün S., Bora M. Ö., Atapek Ş. H.
MATERIALS RESEARCH EXPRESS , cilt.12, sa.7, 2025 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

11. Comprehensive Sliding Wear Analysis of 3D-Printed ABS, PLA, and HIPS: ANOVA, SEM Examination, and Wear Volume Measurements with Varying Layer Thickness

Fidan S., Ürgün S., Şahin A. E., Bora M. Ö., Yılmaz T., Özsoy M. İ.
Polymers , cilt.17, ss.1-22, 2025 (Scopus) Creative Commons License

12. The Effect of Pre-Cyclic Thermal Loads on the Buckling Performance of Glass Fiber-Reinforced Polymer Composites Without Post-Curing Treatment: Experimental and Numerical Investigation

SÜSLER S., BORA M. Ö., Ucan C., Türkmen H. S.
POLYMER COMPOSITES , 2025 (SCI-Expanded) identifier identifier

13. Drilling Machinability of Glass, Basalt, and Hybrid Epoxy Composites: Thrust Force, Thermal Load, and Hole Quality

Yarar E., Özsoy M. İ., Fidan S., Ürgün S., Bora M. Ö.
POLYMERS , cilt.17, sa.12, ss.1-27, 2025 (Scopus) Creative Commons License identifier identifier identifier

14. Flame retardant effect of cellulose xanthate additive on semi-rigid polyurethane foam by hybrid application method

Guliyev R., TEKİN N., BORA M. Ö., Yagci Y. E.
POLYMER ENGINEERING AND SCIENCE , cilt.65, ss.2930-2943, 2025 (SCI-Expanded) identifier identifier

15. Stacking Sequence Effect of Basalt/Carbon Hybrid Laminated Composites on Solid Particle Erosion Behavior: From Ambient to Elevated Temperatures

Özsoy M. İ., Fidan S., Bora M. Ö., Ürgün S.
Polymers , cilt.17, sa.10, ss.1-22, 2025 (Scopus) identifier identifier identifier

16. Modelling of Hardness and Electrical Conductivity of Cu-4Ti (wt.%) Alloy and Estimation of Aging Parameters Using Metaheuristic Algorithms

Konieczny J., Labisz K., Ürgün S., Yiğit H., Fidan S., Bora M. Ö., et al.
MATERIALS , cilt.18, sa.10, 2025 (SCI-Expanded, Scopus) identifier identifier identifier

17. Decomposition of matrix in basalt fiber-reinforced composites using laser processing parameters for clear unveiling of fibers without damage

Ürgün S., Fidan S., Ozsoy M. I., Bora M. Ö.
POLYMER COMPOSITES , sa.5, ss.4281-4301, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

18. Enhancing Wear Resistance and Adhesion of Primer Coatings on Laser-Textured Milled Carbon Fiber-Filled Basalt Composites

Coşkun Ö., Fidan S., Özsoy M. İ., Bora M. Ö., Ürgün S., Şahin A. E., et al.
Polymers , cilt.17, sa.9, ss.1-26, 2025 (Scopus) Creative Commons License

19. Metaheuristics Algorithm-Based Optimization for High Conductivity and Hardness CuNi2Si1 Alloy

Konieczny J., Labisz K., ÜRGÜN S., YİĞİT H., FİDAN S., BORA M. Ö., et al.
MATERIALS , cilt.18, sa.5, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier identifier

20. Understanding the Damage Mechanisms of Basalt/Carbon Fiber Hybrid Composites Under Quasi-Static and Dynamic Loadings

Özsoy M. İ., Fidan S., Bora M. Ö., Ürgün S.
Polymers , cilt.7, sa.17, ss.1-28, 2025 (Scopus) identifier identifier identifier

21. Scratch load and indenter type dependent scratch evaluation of milled carbon fiber filled basalt fiber/epoxy composites with factorial design

Fidan S., Ürgün S., Bora M. Ö., Özsoy M. I.
POLYMER COMPOSITES , cilt.46, sa.3, ss.2826-2846, 2025 (SCI-Expanded, Scopus) identifier identifier

22. On the surface characterization of laser treated DIN 1.2379 tool steel

Uçakkuş Ö. E., Zeren A., Ürgün S., Fidan S., Atapek Ş. H., Ceylan R., et al.
JOURNAL OF LASER APPLICATIONS , cilt.37, sa.1, 2025 (SCI-Expanded) identifier identifier

23. Effect of expanded perlite as an environmentally friendly flame-retardant in semi-rigid polyurethane foam

Guliyev R., TEKİN N., BORA M. Ö., Yagci Y. E.
JOURNAL OF APPLIED POLYMER SCIENCE , cilt.142, sa.2, 2025 (SCI-Expanded) identifier identifier

24. Investigation of surface structuring and oxidation performance of Inconel 718 superalloy by laser remelting with different patterns

FİDAN S., ÜRGÜN S., ATAPEK Ş. H., Celik G. A., CANEL T., SINMAZÇELİK T., et al.
ENGINEERING FAILURE ANALYSIS , cilt.167, 2025 (SCI-Expanded, Scopus) identifier identifier

25. Determination of the Optimum Laser Processing Parameters Required to Obtain a Stable Hydrophobic Surface on the Surface of AA1050 Aluminum Alloy

ÜRGÜN S., BORA M. Ö., FİDAN S., TOSUNOĞLU Ş., CANEL T.
Natural and Applied Sciences Journal , cilt.7, sa.2, ss.69-85, 2024 (Hakemli Dergi)

26. Comparative evaluation of solid particle erosion resistance in milled carbon fiber-reinforced basalt fiber epoxy composites: Impact of abrasive shape variations

Ürgün S., Özsoy M. İ., Bora M. Ö., Fidan S.
POLYMER COMPOSITES , cilt.45, sa.16, ss.15356-15379, 2024 (SCI-Expanded, Scopus) identifier identifier

27. Effect of solid lubricant additives on solid particle erosion characteristics of rigid and toughened epoxy resins

Toker P. O., KORKUSUZ O. B., Ozun E., Ceylan R., FİDAN S., YARAR E., et al.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY , cilt.30, sa.6, ss.1468-1484, 2024 (SCI-Expanded, Scopus) identifier identifier

28. Advanced hybrid composites: A comparative study of glass and basalt fiber reinforcements in erosive environments

Fidan S., Özsoy M. İ., Bora M. Ö., Ürgün S.
POLYMER COMPOSITES , cilt.45, sa.13, ss.12071-12091, 2024 (SCI-Expanded, Scopus) identifier identifier

29. Scratch resistance of glass-basalt fiber reinforced epoxy hybrid composites: A comparative study

FİDAN S., Ozsoy M. I., ÜRGÜN S., BORA M. Ö.
POLYMER COMPOSITES , cilt.45, sa.13, ss.11940-11959, 2024 (SCI-Expanded, Scopus) identifier identifier

30. Understanding the effect of solid lubricants on scratch behavior in epoxy resins: An experimental and statistical approach

Ceylan R., Ozun E., ÖZZAİM TOKER P., KORKUSUZ O. B., YARAR E., FİDAN S., et al.
POLYMER COMPOSITES , cilt.45, sa.8, ss.7346-7363, 2024 (SCI-Expanded, Scopus) identifier identifier

31. Investigation of Groove Width Created by Fiber Laser on ST52 Steel

ÜRGÜN S., BORA M. Ö., FİDAN S., CANEL T.
NATURAL & APPLIED SCIENCES JOURNAL , cilt.7, sa.1, ss.45-60, 2024 (Hakemli Dergi) Creative Commons License

32. Investigation of the effect of thermal aging and wear test parameters on the wear behavior of glass fiber (GF) reinforced epoxy composites

Sahin A. E., Yarar E., Bora M. O., Yilmaz T.
POLYMER COMPOSITES , cilt.45, sa.9, ss.7820-7832, 2024 (SCI-Expanded, Scopus) identifier identifier

33. Effects of Double and Triple Hybrid Nanomaterial Reinforcements on Mechanical Performance of Aluminium Adhesive Joints

Ozun E., Ceylan R., BORA M. Ö., ÇOBAN O., KUTLUK T.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.33, sa.9, ss.4392-4407, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

34. Thermal aging effect on mechanical properties of polyamide 6 matrix composites produced by TFP and compression molding

Yarar E., Şahin A. E., Kara H., Çep E. B., Bora M. Ö.
POLYMER COMPOSITES , cilt.45, sa.3, ss.2869-2884, 2024 (SCI-Expanded) identifier identifier

35. Thermal aging effect of polyamide 6 matrix composites produced by Tailor Fiber Placement (TFP) under compression molding on sliding wear properties

Sahin A. E., Yarar E., Kara H., Cep E. B., Bora M. Ö., Yilmaz T.
POLYMER COMPOSITES , cilt.45, sa.1, ss.98-110, 2024 (SCI-Expanded, Scopus) identifier identifier

36. Exploring the effects of thermal aging on scratch resistance of carbon fiber reinforced composite materials: A comprehensive study

Bulçak T. D., Bora M. Ö., Fidan S., Yarar E., Akagündüz E.
POLYMER COMPOSITES , cilt.44, sa.10, ss.7084-7101, 2023 (SCI-Expanded, Scopus) identifier identifier

37. Comparison of low‐velocity impact behavior of thick laminated composite structure with experimental and modeling technique

Başoğlu F., Yakar E. C., Bora M. Ö., Tuna V.
POLYMER COMPOSITES , cilt.44, sa.11, ss.7657-7673, 2023 (SCI-Expanded) identifier identifier

38. The effect of surface treatments on the interlaminar shear failure of GLARE laminate included AA6061-T6 layers by comparing failure characteristics

Süsler S., Bora M. Ö., Ucan C., Türkmen H. S.
COMPOSITE INTERFACES , cilt.30, sa.6, ss.627-643, 2023 (SCI-Expanded) identifier identifier

39. The effect of hygrothermal aging on the adhesion performance of nanomaterial reinforced aluminium adhesive joints

Ceylan R., Ozun E., ÇOBAN O., BORA M. Ö., KUTLUK T.
International Journal of Adhesion and Adhesives , cilt.121, 2023 (SCI-Expanded, Scopus) identifier identifier

40. Combined effect of surface pretreatment and nanomaterial reinforcement on the adhesion strength of aluminium joints

Ozun E., Ceylan R., Bora M. Ö., ÇOBAN O., KUTLUK T.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.119, 2022 (SCI-Expanded, Scopus) identifier identifier

41. The effect of surface treatments on the interlaminar shear failure of GLARE laminates subjected to pre-cyclic thermal loads

SÜSLER S., BORA M. Ö., Ucan C., Türkmen H. S.
POLYMER COMPOSITES , cilt.43, sa.12, ss.9040-9053, 2022 (SCI-Expanded) identifier identifier

42. Topology Optimization and Additive Manufacturing Application for Check Form Tool on Aviation Industry

Yurduseven S., BORA M. Ö., Abacı B.
Aspects in Mining & Mineral Science (AMMS) , cilt.7, sa.4, ss.847-850, 2021 (Hakemli Dergi)

43. Effect of Liquid Rubbers on The Mechanical and Dispersibility Properties of The Tire Skim Compound

Kılıç E., çeltik f., BORA M. Ö., Altuncu E.
Academic Perspective Procedia , cilt.4, sa.1, ss.129-141, 2021 (Hakemli Dergi)

44. Effect Of Liquid Rubbers On The Thermal And Adhesion Properties Of The Tire Skim Compound

Çeltik F., Kılıç E., BORA M. Ö., Altuncu E.
Academic Perspective Procedia , cilt.4, sa.1, ss.101-110, 2021 (Hakemli Dergi)

45. The Investigation of Damage Mechanisms of Thermally Aged 4/3 Glare with Cone Beam Computed Tomography

FİDAN H., BORA M. Ö., ÇOBAN O., AKAGÜNDÜZ E.
Polymer Science: Peer Review Journal , cilt.2, sa.1, ss.1-7, 2021 (Hakemli Dergi)

46. Laser-induced groove optimization for Al/CFRP adhesive joint strength

Akman E., Bora M. Ö., Çoban O., Oztoprak B.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.107, 2021 (SCI-Expanded) identifier identifier

47. Comparison of novel surface treatments of Al 2024 alloy for al/cfrp adhesive bonded joints

Özgür Bora M. Ö., ÇOBAN O., AKMAN E., Oztoprak B., KUTLUK T.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.103, 2020 (SCI-Expanded, Scopus) identifier identifier

48. Investigation of the differences between photochemical and photothermal laser ablation on the shear strength of CFRP/CFRP adhesive joints

AKMAN E., Erdogan Y., BORA M. Ö., ÇOBAN O., Oztoprak B., Demir A.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.98, 2020 (SCI-Expanded) identifier identifier

49. Laser surface treatment of CFRP composites for a better adhesive bonding owing to the mechanical interlocking mechanism

Çoban O., Akman E., Bora M. Ö., Oztoprak B., Demir A.
POLYMER COMPOSITES , cilt.40, sa.9, ss.3611-3622, 2019 (SCI-Expanded) identifier identifier

50. The Effect of CO2 Laser-Induced Microhole Formations on Adhesive Bonding Strength of CFRP/CFRP Joints

Bora M. Ö., Akman E., Çoban O., Oztoprak B., Demir A.
POLYMER COMPOSITES , cilt.40, ss.2891-2900, 2019 (SCI-Expanded) identifier identifier

51. The use of volcanic particles in HDPE offers alternative filling material against CaCO3. Part II—scratch properties

Bora M. Ö., Çoban O., Kutluk T., Akagündüz E.
Polymer Composites , cilt.40, ss.2564-2572, 2019 (SCI-Expanded, Scopus) identifier identifier

52. Investigation of accumulated laser fluence and bondline thickness effects on adhesive joint performance of CFRP composites

Akman E., Erdoğan Y., Bora M. Ö., Çoban O., Oztoprak B., Demir A.
International Journal of Adhesion and Adhesives , cilt.89, ss.109-116, 2019 (SCI-Expanded) identifier identifier

53. Mechanical and Thermal Properties of Volcanic Particle Filled PLA/PBAT Composites

ÇOBAN O., BORA M. Ö., KUTLUK T., ÖZKOÇ G.
POLYMER COMPOSITES , cilt.39, 2018 (SCI-Expanded, Scopus) identifier identifier

54. Comparative Study of Volcanic Particle and Calcium Carbonate Filler Materials in HDPE for Thermal and Mechanical Properties

ÇOBAN O., BORA M. Ö., KUTLUK T.
POLYMER COMPOSITES , cilt.39, 2018 (SCI-Expanded, Scopus) identifier identifier

55. Heat Treatment Effect on Solid Particle Erosion Properties of Polyphenylene Sulfide Composites Reinforced With Silane Coupled Volcanic Ash Particles

ÇOBAN O., BORA M. Ö., FİDAN S., KUTLUK T., SINMAZÇELİK T.
POLYMER COMPOSITES , cilt.39, sa.5, ss.1638-1646, 2018 (SCI-Expanded, Scopus) identifier identifier

56. The Influence of Heat Treatment Process on Mechanical Properties of Surface Treated Volcanic Ash Particles/Polyphenylene Sulfide Composites

BORA M. Ö., ÇOBAN O., KUTLUK T., FİDAN S., SINMAZÇELİK T.
POLYMER COMPOSITES , cilt.39, sa.5, ss.1604-1611, 2018 (SCI-Expanded, Scopus) identifier identifier

57. Heat Treatment Effect on Thermal and Thermomechanical Properties of Polyphenylene Sulfide Composites Reinforced With Silane-Treated Volcanic Ash Particles

ÇOBAN O., BORA M. Ö., KUTLUK T., FİDAN S., SINMAZÇELİK T.
POLYMER COMPOSITES , cilt.39, sa.5, ss.1612-1619, 2018 (SCI-Expanded, Scopus) identifier identifier

58. Damage characterization of three point bended honeycomb sandwich structures under different temperatures with cone beam computed tomography technique

AKATAY A., BORA M. Ö., FİDAN S., ÇOBAN O.
POLYMER COMPOSITES , cilt.39, sa.1, ss.46-54, 2018 (SCI-Expanded, Scopus) identifier identifier

59. Experimental investigation of single and repeated impacts for repaired honeycomb sandwich structures

BALCI O., ÇOBAN O., BORA M. Ö., Akaguduz E., YALÇİN E. B.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.682, ss.23-30, 2017 (SCI-Expanded) identifier identifier

60. The Scratch Behavior of Accelerated Aged Carbon Fiber-Reinforced Epoxy Matrix Composite

FİDAN S., BORA M. Ö., ÇOBAN O., Akagunduz E.
POLYMER COMPOSITES , cilt.37, sa.12, ss.3527-3534, 2016 (SCI-Expanded, Scopus) identifier identifier

61. Thermal, viscoelastic and mechanical properties' optimization of polyphenylene sulfide via optimal processing parameters using the Taguchi method

Çoban O., Kıvanç T., Bora M. Ö., Özcan Türkkan B., Sınmazçelik T., Fidan S.
JOURNAL OF APPLIED STATISTICS , cilt.43, sa.14, ss.2661-2680, 2016 (SCI-Expanded, Scopus) identifier identifier

62. Effect of Mixed Size Particles Reinforcing on the Thermal and Dynamic Mechanical Properties of Al2O3/PPS Composites

ÇOBAN O., BORA M. Ö., SINMAZÇELİK T.
POLYMER COMPOSITES , cilt.37, sa.11, ss.3219-3227, 2016 (SCI-Expanded) identifier identifier

63. Surface Modification Effect of Volcanic Ash Particles Using Silane Coupling Agent on Mechanical Properties of Polyphenylene Sulfide Composites

BORA M. Ö., ÇOBAN O., FİDAN S., KUTLUK T., SINMAZÇELİK T.
ACTA PHYSICA POLONICA A , cilt.129, sa.4, ss.495-497, 2016 (SCI-Expanded, Scopus) identifier identifier

64. Effect of Silane as Coupling Agent on Dynamic Mechanical Properties of Volcanic Ash Filled PPS Composites

ÇOBAN O., BORA M. Ö., KUTLUK T., FİDAN S., SINMAZÇELİK T.
ACTA PHYSICA POLONICA A , cilt.129, sa.4, ss.492-494, 2016 (SCI-Expanded, Scopus) identifier identifier

65. Silane Coupling Efficiency on Thermal Properties of Volcanic Ash Filled PPS Composites

KUTLUK T., ÇOBAN O., BORA M. Ö., FİDAN S., SINMAZÇELİK T.
ACTA PHYSICA POLONICA A , cilt.129, sa.4, ss.498-500, 2016 (SCI-Expanded, Scopus) identifier identifier

66. The influence of different circular hole perforations on interlaminar shear strength of a novel fiber metal laminates

BORA M. Ö., ÇOBAN O., SINMAZÇELİK T., CÜRGÜL I.
POLYMER COMPOSITES , cilt.37, sa.3, ss.963-973, 2016 (SCI-Expanded) identifier identifier

67. Damage Characterization of Repeatedly Impacted Glass Fiber Reinforced Polyester-Armor Steel Composites With Cone Beam Computed Tomography Technique

FİDAN S., BORA M. Ö., ÇOBAN O., TUNA V.
POLYMER COMPOSITES , cilt.37, sa.2, ss.583-593, 2016 (SCI-Expanded, Scopus) identifier identifier

68. Scratch behavior of glass fiber reinforced polyester matrix composite after solid particle erosion

BORA M. Ö., FİDAN S., ÇOBAN O., YÜCEL Z.
POLYMER COMPOSITES , cilt.36, sa.11, ss.1958-1966, 2015 (SCI-Expanded, Scopus) identifier identifier

69. The influence of low velocity repeated impacts on residual compressive properties of honeycomb sandwich structures

Akatay A., BORA M. Ö., ÇOBAN O., FİDAN S., TUNA V.
COMPOSITE STRUCTURES , cilt.125, ss.425-433, 2015 (SCI-Expanded, Scopus) identifier identifier

70. Evaluation of Volcanic Ash Concentration Effect on Mechanical Properties of Poly(Vinyl Chloride) Composites

Bora M. Ö.
ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1004-1006, 2015 (SCI-Expanded) identifier identifier

71. The influence of heat treatment on scratch behavior of polymethylmethacrylate (PMMA)

Bora M. Ö.
TRIBOLOGY INTERNATIONAL , cilt.78, ss.75-83, 2014 (SCI-Expanded) identifier identifier

72. Possible Use of Volcanic Ash as a Filler in Polyphenylene Sulfide Composites: Thermal, Mechanical, and Erosive Wear Properties

AVCU E., ÇOBAN O., BORA M. Ö., FİDAN S., SINMAZÇELİK T., ERSOY O.
POLYMER COMPOSITES , cilt.35, sa.9, ss.1826-1833, 2014 (SCI-Expanded, Scopus) identifier identifier

73. The Effect of TIO2 Filler Content on the Mechanical, Thermal, and Tribological Properties of TiO2/PPS Composites

BORA M. Ö., ÇOBAN O., AVCU E., FİDAN S., SINMAZÇELİK T.
POLYMER COMPOSITES , cilt.34, sa.10, ss.1591-1599, 2013 (SCI-Expanded, Scopus) identifier identifier

74. Solid Particle Erosive Wear Behavior of Glass Mat Reinforced PPS Composites: Influence of Erodent Particle Size, Pressure, Particle Impingement Angle, and Velocity

AVCU E., FİDAN S., BORA M. Ö., ÇOBAN O., TAŞKIRAN I., SINMAZÇELİK T.
ADVANCES IN POLYMER TECHNOLOGY , cilt.32, 2013 (SCI-Expanded, Scopus) identifier identifier

75. Flexural and erosive properties of aviation composites

BORA M. Ö., ÇOBAN O., AVCU E., FİDAN S., SINMAZÇELİK T.
Society of Plastics Engineers (SPE) , ss.1-4, 2013 (Hakemli Dergi)

76. The Influence of Annealing on the Crystallization and Tribological Behavior of MWNT/PEEK Nanocomposites

ÇOBAN O., BORA M. Ö., AVCU E., SINMAZÇELİK T.
POLYMER COMPOSITES , cilt.32, sa.11, ss.1766-1771, 2011 (SCI-Expanded) identifier identifier

77. A review: Fibre metal laminates, background, bonding types and applied test methods

SINMAZÇELİK T., AVCU E., BORA M. Ö., ÇOBAN O.
MATERIALS & DESIGN , cilt.32, sa.7, ss.3671-3685, 2011 (SCI-Expanded) identifier identifier

78. Düşük Hızlı Darbe Yüklemeleri Sonucu Kompozit Malzemelerde Ortaya Çıkan Hasar Mekanizmaları

FİDAN S., SINMAZÇELİK T., BORA M. Ö., ÇOBAN O.
Mühendis ve Makina , 2011 (Hakemli Dergi)

79. Instrumented indentation and scratch testing evaluation of tribological properties of tin-based bearing materials

BORA M. Ö., ÇOBAN O., SINMAZÇELİK T., GÜNAY V., ZEREN M.
MATERIALS & DESIGN , cilt.31, sa.6, ss.2707-2715, 2010 (SCI-Expanded) identifier identifier

80. Effect of Fiber Orientation on Scratch Resistance in Unidirectional Carbon-Fiber-Reinforced Polymer Matrix Composites

BORA M. Ö., ÇOBAN O., SINMAZÇELİK T., GÜNAY V.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.29, sa.10, ss.1476-1490, 2010 (SCI-Expanded) identifier identifier

81. Effect of Fiber Orientation on Viscoelastic Properties of Polymer Matrix Composites Subjected to Thermal Cycles

ÇOBAN O., BORA M. Ö., SINMAZÇELİK T., GÜNAY V.
POLYMER COMPOSITES , cilt.31, sa.3, ss.411-416, 2010 (SCI-Expanded) identifier identifier

82. Fracture morphology and deformation characteristics of repeatedly impacted thermoplastic matrix composites

Çoban O., Bora M. Ö., Sınmazçelik T., Cürgül I., Günay V.
MATERIALS & DESIGN , cilt.30, sa.3, ss.628-634, 2009 (SCI-Expanded) identifier identifier

83. On the life time prediction of repeatedly impacted thermoplastic matrix composites

Bora M. Ö., Çoban O., Sınmazçelik T., Cuerguel I., Guenay V.
MATERIALS & DESIGN , cilt.30, sa.1, ss.145-153, 2009 (SCI-Expanded) identifier identifier

84. The effects of thermal cycles on the impact fatigue properties of thermoplastic matrix composites

SINMAZÇELİK T., ÇOBAN O., Bora M. Ö., Guenay V., Cuerguel I.
APPLIED COMPOSITE MATERIALS , cilt.15, sa.2, ss.99-113, 2008 (SCI-Expanded) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 115

1. Influence of Pressurized Water Aging on the Reciprocating Wear of Basalt-Fiber-Reinforced Polymer Composites: COF, Wear-Track Profilometry, and Mass Change

Bora M. Ö., Ürgün S., Fidan S., Özsoy M. İ.
3RD INTERNATIONAL CONFERENCE ON RECENT AND INNOVATIVE RESULTS IN ENGINEERING AND TECHNOLOGYICRIRET 2025, Konya, Türkiye, 15 - 16 Kasım 2025, cilt.1, sa.1, ss.50-57, (Tam Metin Bildiri) Creative Commons License

2. Reciprocating Tribological Response of Basalt/Carbon Hybrid FiberReinforced Composites under Hertzian Contact

Ürgün S., Bora M. Ö., Fidan S., Özsoy M. İ.
3RD INTERNATIONAL CONFERENCE ON RECENT AND INNOVATIVE RESULTS IN ENGINEERING AND TECHNOLOGYICRIRET 2025, Konya, Türkiye, 15 - 16 Kasım 2025, cilt.1, sa.1, ss.58-65, (Tam Metin Bildiri) Creative Commons License

3. Synergistic Tribology of Laser-Textured 316L Stainless Steel with Spin-Coated TiO2 Films under Reciprocating Sliding

FİDAN S., BORA M. Ö., ÜRGÜN S., ÖZSOY M. İ., KUTLUK T.
7th International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 25 - 26 Ekim 2025, ss.89-101, (Tam Metin Bildiri)

4. Parametric Study of Fiber-Laser Circular Microtextures on AA2024-T3: Influence of Scale Factor and Scan Speed on Wettability and Roughness

ÇOŞKUN Ö., FİDAN S., BORA M. Ö., ÜRGÜN S., ÖZSOY M. İ.
Proceeding Book of 3rd International Conference on Pioneer and Innovative Studies ICPIS 2025, Konya, Türkiye, 6 - 07 Ekim 2025, sa.2, ss.156-165, (Tam Metin Bildiri)

5. Fiber-Laser Square Texturing of AA2024-T3: Scale Factor and Scanning Speed Effects on Contact Angle and Surface Profilometry

ÇOŞKUN Ö., FİDAN S., BORA M. Ö., ÜRGÜN S., ÖZSOY M. İ.
3rd International Conference on Pioneer and Innovative Studies, Konya, Türkiye, 6 - 07 Ekim 2025, sa.1, ss.147-155, (Tam Metin Bildiri)

6. Reciprocating Sliding Wear Behavior of the 316l Stainless Steel Under Various Test Parameters

ÖZSOY M. İ., FİDAN S., ÜRGÜN S., BORA M. Ö.
6th International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 23 - 24 Haziran 2025, ss.108-118, (Tam Metin Bildiri) Creative Commons License

7. Effect of Fiber Laser Parameters on the Frictional Behavior of Ti6Al4V Alloy under Reciprocating Sliding Conditions

ÖZSOY M. İ., FİDAN S., ÜRGÜN S., BORA M. Ö.
6th International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 23 - 24 Haziran 2025, ss.119-128, (Tam Metin Bildiri) Creative Commons License

8. AYNI SIKIM YÖNTEMİNE SAHİP BONDİNG KABLOLARININ TİTREŞİM ALTINDAKİ PERFORMANS KARŞILAŞTIRMASI

SUNGURAY C., ÜRGÜN S., FİDAN S., BORA M. Ö.
15th INTERNATIONAL CONGRESS ON ENGINEERING, ARCHITECTURE AND DESIGN, İstanbul, Türkiye, 21 - 22 Haziran 2025, ss.123-130, (Tam Metin Bildiri)

9. HAVACILIK UYGULAMALARINDA BONDİNG KABLOLARININ TERMİNAL SIKMA YÖNTEMLERİ VE PERFORMANS ANALİZİ

SUNGURAY C., ÜRGÜN S., FİDAN S., BORA M. Ö.
15th INTERNATIONAL CONGRESS ON ENGINEERING, ARCHITECTURE AND DESIGN, İstanbul, Türkiye, 21 - 22 Haziran 2025, ss.131-138, (Tam Metin Bildiri)

10. Optimizing Laser-Textured Surface Patterns for Hydrophobic and Hydrophilic Control of 316L Steel in Air and Nitrogen

FİDAN S., ÜRGÜN S., BORA M. Ö., ÖZSOY M. İ.
Proceeding Book of 6th International Conference on Scientific and Academic Research ICSAR 2025, Konya, Türkiye, 19 - 20 Mart 2025, sa.1, ss.206-217, (Tam Metin Bildiri)

11. Laser Surface Treatment Effect on the Wettability of 5754 Aluminum Alloys Under Various Gas Atmosphere

FİDAN S., BORA M. Ö., ÜRGÜN S., ÖZSOY M. İ.
Proceeding Book of 6th International Conference on Scientific and Academic Research ICSAR 2025, Konya, Türkiye, 19 - 20 Mart 2025, sa.1, ss.231-242, (Tam Metin Bildiri)

12. Effect of Laser Surface Texturing Under Controlled Atmospheres on the Wettability of Ti6Al4V Alloy

FİDAN S., ÜRGÜN S., BORA M. Ö., ÖZSOY M. İ.
Proceeding Book of 6th International Conference on Scientific and Academic Research ICSAR 2025, Konya, Türkiye, 19 - 20 Mart 2025, sa.1, ss.218-230, (Tam Metin Bildiri)

13. Experimental Investigation of Surface Roughness in 316L Rolled Stainless Steel After Fiber Laser Engraving Using Design of Experiments Approach

ÜRGÜN S., BORA M. Ö., FİDAN S., ÖZSOY M. İ.
PROCEEDING BOOK OF 6TH INTERNATIONAL CONFERENCE ON INNOVATIVE ACADEMIC STUDIES ICIAS 2025, Konya, Türkiye, 12 - 13 Mart 2025, cilt.1, sa.17, ss.127-138, (Tam Metin Bildiri)

14. Curved Surface Fiber Laser Texturing of Ti6Al4V (Grade 5) Titanium Alloy and the Influence of Laser Parameters on Surface Morphology and Roughness Characteristics

FİDAN S., BORA M. Ö., ÜRGÜN S., ÖZSOY M. İ.
PROCEEDING BOOK OF 6TH INTERNATIONAL CONFERENCE ON INNOVATIVE ACADEMIC STUDIES ICIAS 2025, Konya, Türkiye, 12 - 13 Mart 2025, cilt.1, sa.18, ss.139-150, (Tam Metin Bildiri)

15. 1.2379 SOĞUK İŞ TAKIM ÇELİĞİNİN LAZER YÜZEY DOKULAMA YÖNTEMİ VE YÜZEY ÇİZİK TESTİ KULLANILARAK SÜRTÜNME KATSAYISININ İNCELENMESİ

OKCU M., KURT S., BORA M. Ö., FİDAN S., ÜRGÜN S., Ceylan R., et al.
9. INTERNATIONAL MARMARA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, İstanbul, Türkiye, 2 - 03 Şubat 2025, ss.70-83, (Tam Metin Bildiri)

16. AA2024-T3 ALÜMİNYUM ALAŞIMININ FİBER LAZER YÜZEY MODİFİKASYONU İLE KATAFOREZ KAPLAMA TUTUNMA PERFORMANSININ DEĞERLENDİRİLMESİ

KOLUKIRIK B., USTA Z., BORA M. Ö., ÜRGÜN S., FİDAN S., CEYLAN R., et al.
9. INTERNATIONAL MARMARA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, İstanbul, Türkiye, 2 - 03 Şubat 2025, ss.116-131, (Tam Metin Bildiri)

17. 1.2379 SOĞUK TAKIM ÇELİĞİ FİBER LAZER İŞLEME PARAMETRELERİNİN ETKİSİ VE TAGUCHİ YÖNTEMİ İLE OPTİMİZASYONU

KURT S., OKCU M., BORA M. Ö., FİDAN S., ÜRGÜN S., CEYLAN R., et al.
9. INTERNATIONAL MARMARA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, İstanbul, Türkiye, 2 - 03 Şubat 2025, ss.84-101, (Tam Metin Bildiri)

18. AA2024-T3 ALÜMİNYUM ALAŞIMI YÜZEYİNDE FİBER LAZER İŞLEME PARAMETRELERİNİN ETKİSİ VE TAGUCHİ YÖNTEMİ İLE OPTİMİZASYONU

USTA Z., KOLUKIRIK B., BORA M. Ö., FİDAN S., ÜRGÜN S., CEYLAN R., et al.
9. INTERNATIONAL MARMARA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, İstanbul, Türkiye, 2 - 03 Şubat 2025, ss.102-115, (Tam Metin Bildiri)

19. Laser Surface Texturing of AA1050 Aluminum Alloy: Optimization of Geometric Patterns and Laser Parameters for Enhanced Surface Characteristics

Pilavcı Ç., ÜRGÜN S., FİDAN S., BORA M. Ö., ÜRGÜN D.
4th International Symposium on Characterization, Sakarya, Türkiye, 16 - 18 Ekim 2024, (Tam Metin Bildiri) Creative Commons License

20. Effect of Laser Sintering Parameters: Including Hatch Distance and Scanning Angle on Surface Characteristics of 6061-T6 Aluminum Alloy on Curved Surfaces

FİDAN S., ÜRGÜN S., BORA M. Ö., ÖZSOY M. İ.
2nd International Conference on Trends in Advanced Research (ICTAR), Konya, Türkiye, 22 - 23 Kasım 2024, ss.431-444, (Tam Metin Bildiri) Creative Commons License

21. Effect of Fiber Laser Parameters on Surface Roughness, Line Morphology and Surface Topography of 6061-T6 Aluminum Alloy on Curved Surfaces

FİDAN S., ÜRGÜN S., BORA M. Ö., ÖZSOY M. İ.
2nd International Conference on Trends in Advanced Research (ICTAR), Konya, Türkiye, 22 - 23 Kasım 2024, ss.445-458, (Tam Metin Bildiri) Creative Commons License

22. AN EXAMINATION OF THE IMPACT OF RECYCLED MATERIALS ON THE MECHANICAL PROPERTIES OF MULTILAYER FLEXIBLE MONO POLYETHYLENE FILMS

EKİNLİ B., TEKİN C., BORA M. Ö.
13TH INTERNATIONAL İSTANBUL SCIENTIFIC RESEARCH CONGRESS, İstanbul, Türkiye, 1 - 03 Ekim 2024, cilt.1, ss.1305-1322, (Tam Metin Bildiri)

23. THE EFFECT OF AGING PROCESS ON THE SEALING PROPERTIES OF PACKAGING CONTAINING RECYCLABLE POLYETHYLENE

Tekin C., Ekinli B., Bora M. Ö.
13TH INTERNATIONAL İSTANBUL SCIENTIFIC RESEARCH CONGRESS, İstanbul, Türkiye, 1 - 03 Ekim 2024, ss.926-928, (Özet Bildiri)

24. THE EFFECT OF AGING PROCESS ON THE SEALING PROPERTIES OF PACKAGING CONTAINING RECYCLABLE POLYETHYLENE

Ekinli B., Tekin C., Bora M. Ö.
13TH INTERNATIONAL İSTANBUL SCIENTIFIC RESEARCH CONGRESS, İstanbul, Türkiye, 1 - 03 Ekim 2024, ss.1305-1322, (Tam Metin Bildiri)

25. Investigation of the Effects of CO2 Laser Processing Parameters on Kerf Width and Depth in Basalt Fiber Reinforced Epoxy Composites

Ürgün S., Fidan S., Özsoy M. İ., Bora M. Ö.
6th International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 25 - 26 Eylül 2024, cilt.1, ss.272-281, (Tam Metin Bildiri) Creative Commons License

26. Fiber Laser Peening of Ti6Al4V Alloy Considering the Effects of Laser Power, Scan Speed and Overlap Rate on Surface Morphology and Roughness

Ürgün S., Fidan S., Özsoy M. İ., Bora M. Ö.
6th International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 25 - 26 Eylül 2024, cilt.1, ss.119-129, (Tam Metin Bildiri) Creative Commons License

27. Fiber Laser Induced Texturing Geometric Effects on 316L Stainless Steel: Surface Morphology and Roughness Assessment

Fidan S., Ürgün S., Özsoy M. İ., Bora M. Ö.
3rd International Conference on Scientific and Innovative Studies, Konya, Türkiye, 11 - 12 Eylül 2024, cilt.1, ss.446-458, (Tam Metin Bildiri) Creative Commons License

28. Laser Surface Texturing Parameters and Their Influence on Surface Roughness in Basalt Fiber Reinforced Epoxy Composites

Fidan S., Ürgün S., Bora M. Ö., Özsoy M. İ.
3rd International Conference on Scientific and Innovative Studies, Konya, Türkiye, 11 - 12 Eylül 2024, cilt.1, ss.236-245, (Tam Metin Bildiri) Creative Commons License

29. Advanced Smoke Detection Technique in Laser Surface Texturing of Basalt Fiber Reinforced Epoxy Composites

Ürgün S., Fidan S., Bora M. Ö., Özsoy M. İ.
5TH INTERNATIONAL CONFERENCE ON ENGINEERING AND APPLIED NATURAL SCIENCES ICEANS 2024, Konya, Türkiye, 25 - 26 Ağustos 2024, cilt.1, sa.1, ss.864-873, (Tam Metin Bildiri) Creative Commons License

30. ENHANCED SURFACE ANALYSIS OF AVIATION-GRADE 4330 STEEL PROCESSED WITH FIBER LASER: A COMPARATIVE STUDY USING BARKHAUSEN NOISE AND GRAYSCALE IMAGE HISTOGRAM METHODS

Yüşen A., Fidan S., Ürgün S., Bora M. Ö.
2. INTERNATIONAL BLACKSEA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Trabzon, Türkiye, 29 - 30 Haziran 2024, cilt.1, sa.1, ss.349-365, (Tam Metin Bildiri)

31. 35ncd16 Low Alloy Steel Fiber Laser-Induced Burn Damage Analysis With The Barkhausen Noise Method

Yüşen A., Fidan S., Bora M. Ö., Ürgün S.
35ncd16 Low Alloy Steel Fiber Laser-Induced Burn Damage Analysis With The Barkhausen Noise Method, Trabzon, Türkiye, 29 - 30 Haziran 2024, cilt.1, sa.1, ss.334-348, (Tam Metin Bildiri)

32. Removal of Epoxy Primer and Acrylic Paint from the Surface of 2024-T3 Alloys Using Fiber Laser: Effects on Surface Morphology and Roughness

Coşkun Ö., Fidan S., Bora M. Ö., Ürgün S.
2. INTERNATIONAL BLACKSEA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Trabzon, Türkiye, 29 - 30 Haziran 2024, cilt.1, sa.1, ss.515-530, (Tam Metin Bildiri)

33. INVESTIGATION OF THE EFFECT OF CUTTING PARAMETERS ON SURFACE ROUGHNESS IN THE MANUFACTURING OF HARDOX 450 MATERIAL BY MILLING METHOD

Turan Z., Ürgün S., Fidan S., Bora M. Ö.
3rd INTERNATIONAL CONGRESS ON ENGINEERING AND SCIENCES, İstanbul, Türkiye, 10 - 11 Mayıs 2024, cilt.1, sa.1, ss.245-255, (Tam Metin Bildiri)

34. DETERMINATION OF THE VARIATION OF ABSORPTION ENERGY AND DAMAGE AREA IN THICK LAYERED COMPOSITES UNDER DROP WEIGHT IMPACT LOADING BY MODELLING THE SYMMETRY OF THE FULL MODEL

Başoğlu F., Bora M. Ö., Yakar E. C.
MAS 19th INTERNATIONAL EUROPEAN CONFERENCE ON MATHEMATICS, ENGINEERING, NATURAL & MEDICAL SCIENCES, Mingachevir, Azerbaycan, 17 - 18 Nisan 2024, cilt.1, sa.1, ss.141-149, (Tam Metin Bildiri)

35. Poliviniliden Florür (PVDF) Yarı Kristalin Floropolimer Malzemede İletken Karbon Siyahı Katkısının Termal Özelliklere Etkisinin Eriyik Yığma Modelleme (Fused Deposition Modeling - FDM) 3B Baskı Prosesinde İşlenme Öncesi ve Sonrası Termogravimetrik Analiz Yöntemi ile İncelenmesi

Arıkan N., Mutlu İ., Yağcı Y. E., Bora M. Ö.
2nd International Conference on Scientific and Innovative Studies, Konya, Türkiye, 18 - 19 Nisan 2024, cilt.1, sa.1, ss.828-833, (Tam Metin Bildiri)

36. 1.2379 SOĞUK İŞ TAKIM ÇELİĞİNDE TEKRARLI CO2 LAZER HATTI İŞLEMLERİNDEN KAYNAKLANAN YÜZEY MORFOLOJİSİ DEĞİŞİKLİKLERİNİN KARAKTERİZASYONU

Uçakkuş Ö. E., Zeren A., Fidan S., Bora M. Ö., Ürgün S., Ceylan R., et al.
9. INTERNATIONAL SCIENCES AND INNOVATION CONGRESS, Şanlıurfa, Türkiye, 16 - 17 Mart 2024, ss.95-108, (Tam Metin Bildiri)

37. CO2 LAZER İŞLEME PARAMETRELERİNİN 1.2379 SOĞUK İŞ TAKIM ÇELİĞİ YÜZEYLERİ ÜZERİNDEKİ ETKİLERİNİN İNCELENMESİ

Uçakkuş Ö. E., Zeren A., Ürgün S., Fidan S., Bora M. Ö., Ceylan R., et al.
9. INTERNATIONAL SCIENCES AND INNOVATION CONGRESS, Şanlıurfa, Türkiye, 16 - 17 Mart 2024, ss.109-125, (Tam Metin Bildiri)

38. Determination of Processing Parameters of a Custom-made Injection Molding /Extrusion Grade Electrically Conductive Polyvinylidene Fluoride (PVDF) Polymer-Based Composite as a Feeding Material in the Fused Deposition Modeling (FDM) Process

Arıkan N., Mutlu İ., Yağcı Y. E., Bora M. Ö.
4th International Conference on Innovative Academic Studies (ICIAS), Konya, Türkiye, 12 - 13 Mart 2024, ss.1056-1061, (Tam Metin Bildiri) Creative Commons License

39. Nano Silika Takviyesinin Epoksi Reçinenin Sürtünme Katsayısı Değerlerine Etkilerinin İncelenmesi

Ozun E., Ceylan R., FİDAN S., BORA M. Ö.
13. Uluslararası Bilimsel Çalışmalar Kongresi (UBCAK), 27 - 28 Şubat 2024, ss.243-244, (Özet Bildiri)

40. Cam Fiber Takviyeli Epoksi Reçinelerin Çizilme Performanslarının İncelenmesi

OZUN E., Ceylan R., FİDAN S., BORA M. Ö.
13. Uluslararası Bilimsel Çalışmalar Kongresi (UBCAK), 27 - 28 Şubat 2024, ss.172-173, (Özet Bildiri)

41. EFFECT OF KAOLINITE ON THE PHYSICOCHEMICAL PROPERTIES AND FLAME RETARDANT BEHAVIOR OF SEMI-RIGID POLYURETHANE FOAM

GULİYEV R., TEKİN N., YAĞCI Y. E., BORA M. Ö.
15th INTERNATIONAL CONGRESS SCIENTIFIC RESEARCH, CHINA TO ADRIATIC, Baku, Azerbaycan, 7 - 09 Ocak 2024, ss.28-29, (Özet Bildiri)

42. SURFACE HARDENING OF TI6AL4V TI ALLOY WITH LOW‐POWER FIBER LASER IN AIR

YILMAZ F., AKMAN E., FİDAN S., BORA M. Ö.
12. ULUSLARARASI MÜHENDİSLİK, MİMARLIK VE TASARIM KONGRESİ, İstanbul, Türkiye, 23 Aralık 2023, ss.587-596, (Tam Metin Bildiri)

43. Investigation of the Fire Resistance of Semi-Rigid Polyurethane Foam with Eggshell Powder by Experimental Methods

GULİYEV R., TEKİN N., YAĞCI Y. E., BORA M. Ö.
6 th INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES, Antalya, Türkiye, 2 - 05 Kasım 2023, ss.65-72, (Tam Metin Bildiri)

44. EXPERIMENTAL INVESTIGATION OF THE EFFECT OF BENTONITE ADDITION ON THE FIRE RESISTANCE OF SEMI-RIGID POLYURETHANE FOAM

GULİYEV R., TEKİN N., YAĞCI Y. E., BORA M. Ö.
5TH INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS, Rize, Türkiye, 8 - 10 Kasım 2023, ss.557-564, (Tam Metin Bildiri)

45. INVESTIGATION OF THE FLAME RESISTANCE OF RIGID AND SEMI-RIGID POLYURETHANE FOAM WITH CLINOPTILOLITE ADDITIVES BY EXPERIMENTAL METHODS

GULİYEV R., TEKİN N., YAĞCI Y. E., BORA M. Ö.
EGE 8th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, İzmir, Türkiye, 2 - 04 Haziran 2023, ss.8-10, (Özet Bildiri)

46. IMPROVING OF THE FLAME RESISTANCE OF RIGID AND SEMI-RIGID POLYURETHANE FOAM WITH KYTOSAN ADDITIVES

GULİYEV R., TEKİN N., BORA M. Ö., YAĞCI Y. E.
EGE 8th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, İzmir, Türkiye, 2 - 04 Haziran 2023, ss.45-53, (Tam Metin Bildiri)

47. FARKLI DÜŞÜK HIZLI DARBE ENERJİLERİNE MARUZ BIRAKILMIŞ KALIN TABAKALI KOMPOZİTLERİN ENERJİ DAVRANIŞLARININ DENEYSEL VE MODELLEME TEKNİĞİ İLE KARŞILAŞTIRILMASI

BAŞOĞLU F., BORA M. Ö., YAKAR E. C., TUNA V.
5. INTERNATIONAL PALANDOKEN SCIENTIFIC STUDIES CONGRESS, Erzurum, Türkiye, 18 Mart 2023, ss.918-929, (Tam Metin Bildiri)

48. THE EFFECTS OF HIGH SOLID SYNTHESIS ON THE RHEOLOGICAL AND THERMAL PROPERTIES OF HIGH VISCOSITY STYRENE CO-BUTYL ACRYLATE POLYMERIZATION

KILIÇ S., BORA M. Ö., KARABIYIK B., YILMAZ ADIGÜZEL Ö., EREN M.
10. ULUSLARARASI MÜHENDİSLİK MİMARLIK VE TASARIM KONGRESİ, Ankara, Türkiye, 24 Aralık 2022, ss.1397-1403, (Tam Metin Bildiri)

49. THE SCRATCH PERFORMANCE OF THERMALLY AGED CARBON FIBER REINFORCED EPOXY MATRIX COMPOSITES

DEMİRCİOĞLU BULÇAK T., BORA M. Ö., FİDAN S., AKAGÜNDÜZ E.
9. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, Ankara, Türkiye, 14 Mayıs 2022, ss.952-959, (Tam Metin Bildiri)

50. THE EFFECT OF LASER FLUENCES ON THE SURFACE RESISTANCE OF ANODIZED AA2024-T3 ALUMINUM ALLOYS

AKBAŞ M. M., AKMAN E., BORA M. Ö., AKAGÜNDÜZ E.
9. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, Ankara, Türkiye, 14 Mayıs 2022, ss.865-872, (Tam Metin Bildiri)

51. LAZERLE İŞLENEN AISI316L KODLU PASLANMAZ ÇELİK MALZEME YÜZEYLERİNİN FONKSİYONELLEŞTİRİLMESİ

MERAY D., GENÇ ÖZTOPRAK B., AKMAN E., BORA M. Ö., AKAGÜNDÜZ E.
9. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, Ankara, Türkiye, 14 Mayıs 2022, ss.96-103, (Tam Metin Bildiri)

52. THE INFLUENCE OF HOLDING TIME ON THE IMPACT AND FLEXURAL PROPERTIES OF TFP PRODUCED GF-PA6 COMPRESSION MOLDING PROCESS

KARA H., BORA M. Ö., BAŞ E.
16. MAS INTERNATIONAL EUROPEAN CONFERENCE ON MATHEMATICS, ENGINEERING, NATURAL & MEDICAL SCIENCES, Mardin, Türkiye, 22 Şubat 2022, ss.54-65, (Tam Metin Bildiri)

53. Investigation of adhesive shear strength for various nanomaterial reinforced AA7075-T6 adhesive joints

Ceylan R., Ozun E., BORA M. Ö., ÇOBAN O., KUTLUK T.
3rd International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2021), Ankara, Türkiye, 15 Aralık 2021, ss.598-605, (Tam Metin Bildiri)

54. Effect of mechanical and chemical surface pretreatments on the shear strength of MWCNT-COOH reinforced aluminium adhesive joints

Ozun E., Ceylan R., Bora M. Ö., Çoban O., Kutluk T.
3rd International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2021), Ankara, Türkiye, 15 Aralık 2021, ss.606-613, (Tam Metin Bildiri)

55. Study on the Influence of Kaolinite Filler Concentration on the Mechanical and Thermal Properties of Nylon 66 Composites

GÜLER M. C., YAĞCI Y. E., BORA M. Ö.
6th International Mediterranean SCIENCE AND ENGINEERING CONGRESS (IMSEC 2021), Antalya, Türkiye, 25 - 27 Kasım 2021, cilt.1, ss.405, (Özet Bildiri)

56. The effect of holding time on the mechanical properties of TFP produced thermoplastic matrix composites under compression molding process

KARA H., BORA M. Ö., BAŞ E.
International Conferences on Science and Technology Engineering Sciences and Technology ICONST EST 2021, Budva, Karadağ, 08 Eylül 2021, ss.203-213, (Tam Metin Bildiri)

57. INVESTIGATION OF INTERLAMINAR STRENGTH OF FIBER METAL LAMINATES INCLUDING 6061-T4 ALUMINUM SHEET SURFACES PROCESSED WITH FIBER LASER TECHNIQUE

AKSÜT R., BORA M. Ö., AKMAN E.
7th International Congress on Engineering, Architecture and Design, Ankara, Türkiye, 21 - 22 Mayıs 2021, ss.789-797, (Tam Metin Bildiri)

58. DESIGN AND ANALYSIS OF THERMOPLASTIC PREPREG BASED HEAVY COMMERCIAL VEHICLE SEAT

BİRÇİÇEK S., BORA M. Ö., ARKIN E., YAKAR B., ERTÜRK E., GÖDEK E.
International Conference on Technology, Engineering and Science (IConTES), Antalya, Türkiye, 29 Ekim - 01 Kasım 2020, cilt.11, ss.98-105, (Tam Metin Bildiri)

59. EFFECT OF THERMAL CYCLES ON FLEXURAL BEHAVIOR OF AL/AL HONEYCOMB SANDWICH STRUCTURES

KURT E., BORA M. Ö., SÜSLER S., TÜRKMEN H. S., AKAGÜNDÜZ E.
International Conference on Technology, Engineering and Science (IConTES), Antalya, Türkiye, 29 Ekim - 01 Kasım 2020, cilt.11, ss.89-97, (Tam Metin Bildiri)

60. INVESTIGATION OF THE EFFECT OF VARYING LASER SCRIBE SIZES ON THE ADHESION PERFORMANCE OF THE AA2024-T3/CFRP JOINTS DEPENDING ON THE NUMBER OF LASER SCAN REPEATS

aybalık s., ÇOBAN O., BORA M. Ö., AKMAN E., GENÇ ÖZTOPRAK B.
International Conference on Technology, Engineering and Science (IConTES), 29 Ekim - 01 Kasım 2020, (Tam Metin Bildiri)

61. The Effect of Cataphoresis Coating on Fatigue Behaviour of Control Arms under Corrosion Environment

UÇAN C., BORA M. Ö., ÇOBAN O.
IConTES 2019: International Conference on Technology, Engineering and Science, Antalya, Türkiye, 26 - 29 Ekim 2019, cilt.7, ss.212-219, (Tam Metin Bildiri)

62. Shear Strength Performance Evaluation of Al/CFRP Adhesive Bonded Joints with Various Silane Treatments at Aluminum Surfaces

BORA M. Ö., ÇOBAN O., KUTLUK T., AKMAN E., GENÇ ÖZTOPRAK B.
International Conference on Engineering Technologies (ICENTE’xx19), Konya, Türkiye, 25 - 27 Ekim 2019, ss.270-273, (Tam Metin Bildiri)

63. FPL Etching Parameter Optimization for Adhesion Performance of Al/CFRP Adhesive Joints

ÇOBAN O., BORA M. Ö., GENÇ ÖZTOPRAK B., AKMAN E., KUTLUK T.
International Conference on Engineering Technologies (ICENTE’xx19), Konya, Türkiye, 25 - 27 Ekim 2019, ss.280-284, (Tam Metin Bildiri)

64. Evaluation of Different Surface Treatment Methods Applied to Improve the Chemical Adhesion Mechanism of Al/CFRP Adhesive Bonding

GENÇ ÖZTOPRAK B., ÇOBAN O., AKMAN E., BORA M. Ö., KUTLUK T.
International Conference on Engineering Technologies (ICENTE’xx19), Konya, Türkiye, 25 - 27 Ekim 2019, ss.274-279, (Tam Metin Bildiri)

65. Surface Preparation of the Al 2024 Alloy for Adhesive Bonding of Al/ CFRP Using Fiber Laser Treatment

AKMAN E., BORA M. Ö., ÇOBAN O., GENÇ ÖZTOPRAK B.
International Conference on Engineering Technologies (ICENTE’xx19), Konya, Türkiye, 25 - 27 Ekim 2019, ss.285-288, (Tam Metin Bildiri)

66. IMPROVING INTERFACE BETWEEN POLYESTER CORD AND RUBBER COMPOUND BY USING REACTIVE LIQUID RUBBERS

çeltik f., ersoy t., erenkaya m., BORA M. Ö., KARAAĞAÇ B.
Physical Organic Chemistry (GRS) Gordon Research Seminar, Understanding and Exploiting Structure, Function and Theory in Organic Chemistry, 22 - 23 Haziran 2019

67. NOVEL SURFACE STRUCTURING OF CFRPS FOR ADHESIVE BONDING: EFFECT OF LASER INDUCED SCRIBE PATTERN ANGLE ON ADHESION STRENGTH

ÇOBAN O., AKMAN E., BORA M. Ö., GENÇ ÖZTOPRAK B., DEMİR A.
II INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND INNOVATION, 7 - 11 Mart 2018, ss.12, (Özet Bildiri)

68. EFFECTS OF THE LASER WAVELENGTH ON THE PRE-TREATMENT OF CARBON FIBER-REINFORCED PLASTICS FOR ADHESIVE JOINT

ÇOBAN O., ERDOĞAN Y., AKMAN E., BORA M. Ö., GENÇ ÖZTOPRAK B., DEMİR A.
II INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND INNOVATION, 7 - 11 Mart 2018, ss.11, (Özet Bildiri)

69. EFFECT OF MECHANICAL INTERLOCKING WITH VARIOUS MICRO HOLE FORMATIONS ON THE ADHESIVE BONDING STRENGTH OF CFRP/CFRP JOINTS

BORA M. Ö., ERDOĞAN Y., AKMAN E., ÇOBAN O., GENÇ ÖZTOPRAK B., DEMİR A.
II INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND INNOVATION, 7 - 11 Mart 2018, ss.10, (Özet Bildiri)

70. SPECTROSCOPIC SURFACE INVESTIGATION OF LASER TREATED CFRPS TO ACHIEVE OPTIMUM ADHESIVE BONDING

BORA M. Ö., GENÇ ÖZTOPRAK B., AKMAN E., ÇOBAN O., DEMİR A.
THEINTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY ANDINNOVATION, 7 - 11 Mart 2018, ss.9, (Özet Bildiri)

71. The effect of flexural strain rates on the flexural behavior of 4/3 GLARE fiber metal laminated composites

FİDAN h., BORA M. Ö., ÇOBAN O., AKAGÜNDÜZ e.
5th INTERNATIONAL POLYMERIC COMPOSITES SYMPOSIUM AND WORKSHOPS, 2 - 04 Kasım 2017, ss.194-200, (Tam Metin Bildiri)

72. Laser Structuring of CFRP Surface for Adhesive Bonding Using Michelson Interferometer and Laser Beam

ERDOĞAN Y., AKMAN E., ÇOBAN O., BORA M. Ö., GENÇ ÖZTOPRAK B., DEMİR A.
Turkish Physical Society 33rd International Physics Congress, 6 - 10 Eylül 2017, ss.512, (Özet Bildiri)

73. Study Of Laser Induced Micro-Hole Configuration In Order To Exploit Mechanical Interlocking Effect On Adhesive Bonding

BORA M. Ö., AKMAN E., ÇOBAN O., GENÇ ÖZTOPRAK B., DEMİR A.
III INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS), 3 - 07 Mayıs 2017, ss.864-869, (Tam Metin Bildiri)

74. Effect of Bondline Thickness on Adhesive Bonding of Laser Treated Carbon Fiber Reinforced Composites

AKMAN E., ERDOĞAN Y., BORA M. Ö., ÇOBAN O., GENÇ ÖZTOPRAK B., DEMİR A.
III INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS), 3 - 07 Mayıs 2017, ss.1080-1083, (Tam Metin Bildiri)

75. Investigation of laser induced line pattern surface structuring effect on adhesive bonding of CFRP aircraft composites

ÇOBAN O., AKMAN E., BORA M. Ö., GENÇ ÖZTOPRAK B., DEMİR A.
III INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS), 3 - 07 Mayıs 2017, ss.1084-1089, (Tam Metin Bildiri)

76. Analysis of Laser Treated CFRP Surfaces by Laser-InducedBreakdown Spectroscopy

GENÇ ÖZTOPRAK B., AKMAN E., ÇOBAN O., BORA M. Ö., DEMİR A.
CSI XL - IX EMSLIBS, 11 - 16 Haziran 2017, ss.257, (Özet Bildiri)

77. Scratch Deformation Characteristics of Calcium Carbonate Filled High Density Polyethylene Composites

BORA M. Ö., ÇOBAN O., KUTLUK T., AKAGÜNDÜZ E.
ICAIE International Conference on Advances and Innovations in Engineering, 10 - 12 Mayıs 2017, ss.852-855, (Tam Metin Bildiri)

78. A study on thermal behavior of volcanic particle filled high-density polyethylene

ÇOBAN O., BORA M. Ö., KUTLUK T.
ICAIE International Conference on Advances and Innovations in Engineering, 10 - 12 Mayıs 2017, ss.848-851, (Tam Metin Bildiri)

79. A STUDY ON THERMAL PROPERTIES OF VOLCANIC PARTICLE FILLED POLY LACTIC ACID POLY BUTYLENE ADIPATE COTEREPHTHALATE COMPOSITE

KUTLUK T., ÇOBAN O., BORA M. Ö., ÖZKOÇ G.
16th International Materials Symposium (IMSP’2016), 12 - 14 Ekim 2016, ss.109-116, (Tam Metin Bildiri)

80. THE INFLUENCE OF REPEATED LOW VELOCITY IMPACTS ONHONEYCOMB SANDWICH STRUCTURES

AKTAŞ M., BORA M. Ö., ÇOBAN O., AKAGÜNDÜZ E., YALÇİN E. B.
16th International Materials Symposium (IMSP’2016), 12 - 14 Ekim 2016, ss.1623-1629, (Tam Metin Bildiri)

81. A NUMERICAL INVESTIGATION ON THERMAL CONDUCTIVITYOF SILICONE NITRATE SILICONE RUBBER COMPOSITE

BİLGİN F., ARICI M., BORA M. Ö., ÇOBAN O.
IMSP’201616th International Materials Symposium, 12 - 14 Ekim 2016, ss.79-86, (Tam Metin Bildiri)

82. THE INFLUENCE OF VOLCANIC PARTICLES ON MECHANICAL PROPERTIES OF POLY LACTIC ACID POLY BUTYLENE ADIPATE COTEREPHTHALATE BLENDS

BORA M. Ö., ÇOBAN O., KUTLUK T., ÖZKOÇ G.
16th International Materials Symposium (IMSP’2016), 12 - 14 Ekim 2016, ss.1638-1645, (Tam Metin Bildiri)

83. IMPACT BEHAVIOR OF SINGLE IMPACTED HONEYCOMBSANDWICH STRUCTURES

AKTAŞ M., BORA M. Ö., ÇOBAN O., AKAGÜNDÜZ E., YALÇİN E. B.
16th International Materials Symposium (IMSP’2016), 12 - 14 Ekim 2016, ss.874-881, (Tam Metin Bildiri)

84. THE INFLUENCE OF SINGLE LOW VELOCITY IMPACTS ONREPAIRED HONEYCOMB SANDWICH STRUCTURES

BALCI O., ÇOBAN O., BORA M. Ö., AKAGÜNDÜZ E., YALÇİN E. B.
16th International Materials Symposium (IMSP’2016), 12 - 14 Ekim 2016, ss.1630-1637, (Tam Metin Bildiri)

85. THE EFFECT OF REPEATEDLY IMPACTS ON IMPACTPROPERTIES OF REPAIRED HONEYCOMB SANDWICHSTRUCTURES

BALCI O., ÇOBAN O., BORA M. Ö., AKAGÜNDÜZ E., YALÇİN E. B.
16th International Materials Symposium (IMSP’2016), 12 - 14 Ekim 2016, ss.1603-1610, (Tam Metin Bildiri)

86. A Study On Thermal Propertıes Of Volcanıc Partıcle Fılled Poly Lactıc Acıd Poly Butylene Adıpate Co Terephthalate Composıte

KUTLUK T., ÇOBAN O., BORA M. Ö., ÖZKOÇ G.
16th International Materials Symposium, 12 - 14 Ekim 2016, (Tam Metin Bildiri)

87. The Influence Of Volcanıc Partıcles On Mechanıcal Propertıes Of Poly Lactıc Acıd Poly Butylene Adıpate Coterephthalate Blends

ÇOBAN O., BORA M. Ö., KUTLUK T., ÖZKOÇ G.
16th International Materials Symposium, 12 - 14 Ekim 2016, (Tam Metin Bildiri)

88. The influence of volcanic particles on mecchanical properties of PLA PBAT Blends

ÇOBAN O., BORA M. Ö., KUTLUK T., ÖZKOÇ G.
16th internatioanl materials symposium, Denizli, Türkiye, 12 - 14 Ekim 2016, (Tam Metin Bildiri)

89. A study on thermal properties of volcanic particle filled PLA PBAT composites

KUTLUK T., ÇOBAN O., BORA M. Ö., ÖZKOÇ G.
16th International materials symposium, Denizli, Türkiye, 12 - 14 Ekim 2016, (Tam Metin Bildiri)

90. Erosive Wear Of Volcanic Ash Reinforced Polyphenylene Sulfide Composites

FİDAN S., ÇOBAN O., BORA M. Ö., SINMAZÇELİK T.
ICEAF 4th International Conference of Engineering Against Failure, 24 - 26 Haziran 2015, (Tam Metin Bildiri)

91. Micro Computed Tomography Characterization of Volcanic Ash Particles Used as Reinforcement in Polyphenylene Sulfide Composites

FİDAN S., ÇOBAN O., BORA M. Ö., SINMAZÇELİK T.
4th International Conference of Engineering Against Failure (ICEAF IV), 24 - 26 Haziran 2015, ss.85-90, (Tam Metin Bildiri)

92. Micro computed tomography characteriazation of volcanic ash particles used as reinforcement in poyphenylenesulphide composites

FİDAN S., ÇOBAN O., BORA M. Ö., SINMAZÇELİK T.
4 th International conference of engineering against failure (ICEAF IV) Skiathos, Greece, 24 - 26 Haziran 2015, (Tam Metin Bildiri)

93. Erosive wear of volcanic ash reinforced polypropylene sulphide composites

FİDAN S., ÇOBAN O., BORA M. Ö., SINMAZÇELİK T.
4 th International conference of engineering against failure (ICEAF IV) skiathos, greece, 24 - 26 Haziran 2015, (Tam Metin Bildiri)

94. Thermal and Dynamic Mechanical Properties of Volcanic Ash Reinforced Polyphenylene sulfide Composites

ÇOBAN O., BORA M. Ö., FİDAN S., SINMAZÇELİK T.
4th International Conference of Engineering Against Failure (ICEAF IV), 24 - 26 Haziran 2015, ss.105-112, (Tam Metin Bildiri)

95. Influence of Volcanic Ash Filler Content on Mechanical Properties of Polyphenylene Sulfide Composites

BORA M. Ö., ÇOBAN O., FİDAN S., SINMAZÇELİK T.
4th International Conference of Engineering Against Failure (ICEAF IV), 24 - 26 Haziran 2015, ss.76-84, (Tam Metin Bildiri)

96. Influence of volcanic ash filler content on mechanical properties of Polyphenylene Sulphide Composites

BORA M. Ö., ÇOBAN O., FİDAN S., SINMAZÇELİK T.
4 th International conference of engineering against failure (ICEAF IV) Skiathos, Greece, 24 - 26 Haziran 2015, (Tam Metin Bildiri)

97. Erosive Wear of Volcanic Ash Reinforced Polypropelene Sulfide Composites

FİDAN S., ÇOBAN O., BORA M. Ö., SINMAZÇELİK T.
4th International Conference of Engineering Against Failure (ICEAF IV), Skiathos, Yunanistan, 24 - 26 Haziran 2015, ss.62-67, (Tam Metin Bildiri)

98. Thermal and dynamic mechanical properties of volcanic ash reinforced polyphenylene sulphide composites

ÇOBAN O., BORA M. Ö., FİDAN S., SINMAZÇELİK T.
4 th International conference of engineering against failure (ICEAF IV) Skiathos, Greece, 24 - 26 Haziran 2015, (Tam Metin Bildiri)

99. Silane Coupling Efficiency on Thermal Properties of Volcanic Ash Filled PPS Composites

KUTLUK T., ÇOBAN O., BORA M. Ö., FİDAN S., SINMAZÇELİK T.
5. International Advances in Applied Physics and Materials Science Congress&Exhibition (APMAS2015), Fethiye, Türkiye, 16 - 19 Nisan 2015, ss.108, (Özet Bildiri)

100. Effect of Silane as Coupling Agent on Dynamic Mechanical Properties of Volcanic Ash Filled PPS Composites

ÇOBAN O., BORA M. Ö., KUTLUK T., FİDAN S., SINMAZÇELİK T.
5. International Advances in Applied Physics and Materials Science Congress&Exhibition (APMAS2015), Fethiye, Türkiye, 16 - 19 Nisan 2015, ss.105, (Özet Bildiri)

101. Surface Modification Effect of Volcanic Ash Particles Using Silane Coupling Agent on Mechanical Properties of Polyphenylene Sulfide Composites

BORA M. Ö., ÇOBAN O., FİDAN S., KUTLUK T., SINMAZÇELİK T.
5. International Advances in Applied Physics and Materials Science Congress&Exhibition (APMAS2015), Fethiye, Türkiye, 16 - 19 Nisan 2015, ss.106, (Özet Bildiri)

102. Surface modification Effect of Volcanic Ash Particles Using Silane Coupling Agent on Mechanical Properties of Polyphenylenesulphide composites

BORA M. Ö., ÇOBAN O., FİDAN S., KUTLUK T., SINMAZÇELİK T.
5 th International Advances in Applied and Materials Science Congress & Exhibition (APMAS 2015), 16 - 19 Nisan 2015, (Özet Bildiri)

103. Silan coupling agent effect on solid particle erosion behavior of volcanic ash filled PPS composites

FİDAN S., ÇOBAN O., BORA M. Ö., KUTLUK T., SINMAZÇELİK T.
5 th International advances in Applied Physics and Materials Science Congress & Exhibition (APMAS2015), 16 - 19 Nisan 2015, (Özet Bildiri)

104. Silane Coupling Agent Effect on Solid Particle Erosion Behavior of VolcanicAsh Filled PPS Composites

SİNAN F., ÇOBAN O., BORA M. Ö., KUTLUK T., SINMAZÇELİK T.
5th International Advances in Applied Physics and Materials Science Congress & Exhibition (APMAS2015), 16 - 19 Nisan 2014, (Özet Bildiri)

105. Process Optimization of PPS by Using Taguchi Method for Erosive Behavior Microcompounding and İnjection Molding

FİDAN S., ÇOBAN O., BORA M. Ö., ÖZCAN B., SINMAZÇELİK T., BORA M. Ö.
15 th International Materials Symposium, 15 - 17 Ekim 2014, (Tam Metin Bildiri)

106. Process Optimization of PPS by Using Taguchi Method for Thermomechanical Properties Microcompounding and Injection Molding

AYMERGEN V., ÇOBAN O., BORA M. Ö., FİDAN S., ÖZCAN B., SINMAZÇELİK T.
15 th International Materials Symposium, 15 - 17 Ekim 2014, (Tam Metin Bildiri)

107. Process Optimization of PPS by Using Taguchi Method for Thermal Properties Microcompounding and Injection Molding

AYMERGEN V., ÇOBAN O., BORA M. Ö., FİDAN S., ÖZCAN B., SINMAZÇELİK T.
15 th International Materials Symposium, 15 - 17 Ekim 2014, (Tam Metin Bildiri)

108. Process Optimization of PPS by Using Taguchi Method for Flexural Properties Microcompounding and İnjection Molding

ABDULKADİR K., ÇOBAN O., BORA M. Ö., FİDAN S., ÖZCAN B.
15 th International Materials Symposium, 15 - 17 Ekim 2014, (Tam Metin Bildiri)

109. Computerized tomography characterization of low velocity impact damage in glass fiber reinforced polyester composite

AVCU E., FİDAN S., BORA M. Ö., ÇOBAN O., SINMAZÇELİK T.
14th International Materials Symposium (IMSP’2012), 10 - 12 Ekim 2012, (Tam Metin Bildiri)

110. Detecting Impact Damages In An Aramid/Glass Fiber Reinforced Hybrid Composite With Micro Tomography

FİDAN S., SINMAZÇELİK T., AVCU E., BORA M. Ö., ÇOBAN O.
14th International Conference on Advances in Materials and Processing Technologies (AMPT), İstanbul, Türkiye, 13 - 16 Temmuz 2011, cilt.445, ss.9-10, (Tam Metin Bildiri) identifier identifier

111. Solid particle erosive wear behavior of ductile, semi-ductile and brittle materials: Influence of particle impingement angle and velocity

AVCU E., FİDAN S., BORA M. Ö., ÇOBAN O., SINMAZÇELİK T., Taskiran I.
9th International Conference on Advances and Trends in Engineering Materials and their Applications, AES-ATEMA'2011, Montreal, Kanada, 1 - 05 Ağustos 2011, ss.123-133, (Tam Metin Bildiri) identifier

112. Cam keçe takviyeli polifenilen sülfid matrisli kompozitlerin katı partikül erozyon davranışları partikül çarpma açısının ve hızının etkileri

AVCU E., ŞAHİN A. E., FİDAN S., SINMAZÇELİK T., Taşkıran İ., BORA M. Ö., et al.
I. Ulusal Ege Kompozit Malzemeler Sempozyumu, Türkiye, 17 - 19 Kasım 2011, (Tam Metin Bildiri)

113. Process optimization by design of experiments micro compounding and injection molding of PPS composites

ÇOBAN O., BORA M. Ö., ÖZCAN B., AVCU E., SINMAZÇELİK T.
International Conference on Advances in Materials and Processing Technologies (AMPT), 13 - 16 Temmuz 2011, (Tam Metin Bildiri)

114. Process Optimization by Design of Experiments Micro compounding and Injection Molding of PPS Composit

ÇOBAN O., BORA M. Ö., ÖZCAN B., AVCU E., SINMAZÇELİK T.
International Conference on Advances in Materials and Processing Technologies, 13 - 16 Temmuz 2011, (Tam Metin Bildiri)

115. Solid particle erosive wear behavior of glass mat reinforced thermoplastics influence of erodent particle size particle impingement angle and pressure

AVCU E., FİDAN S., BORA M. Ö., ÇOBAN O., Taşkıran İ., SINMAZÇELİK T.
International Workshop on Thermoplastic Matrix Composites THEPLAC, 23 - 24 Haziran 2011, (Tam Metin Bildiri)
Kitaplar 1

1. Fiber Reinforcement: Continuous Fibers

Sınmazçelik T., Bora M. Ö., Çoban O., Avcu E., Arıcı A. A.
Wiley Encyclopedia of Composites, Luigi Nicolais,Assunta Borzacchiello, Editör, John Wiley & Sons, West Sussex, UK , Oxford, ss.966-980, 2012
Metrikler

Yayın

201

Yayın (WoS)

73

Yayın (Scopus)

77

Atıf (WoS)

1689

H-İndeks (WoS)

18

Atıf (Scopus)

1945

H-İndeks (Scopus)

19

Atıf (Scholar)

2355

H-İndeks (Scholar)

20

Atıf (Sobiad)

78

H-İndeks (Sobiad)

4

Proje

29

Fikri Mülkiyet

1

Tez Danışmanlığı

13

Açık Erişim

17
BM Sürdürülebilir Kalkınma Amaçları