Metrics
Publication
121
Open Access
5
UN Sustainable Development Goals
Education
1996 - 2003
1996 - 2003Doctorate
Kocaeli University, Fen Bilimleri Enstitüsü, Fizik Anabilim Dalı, Turkey
1993 - 1996
1993 - 1996Postgraduate
Kocaeli University, Fen Bilimleri Enstitüsü, Fizik Anabilim Dalı, Turkey
1987 - 1993
1987 - 1993Undergraduate
Middle East Technical University, Faculty Of Engineering, Fizik Mühendisliği, Turkey
Foreign Languages
B2 Upper Intermediate
B2 Upper IntermediateEnglish
Research Areas
Physics
Interdisciplinary Physics and Related Science and Technology Areas
Materials Science
Intensive Article 2: Electronic Structure, Electric, Magnetic and Optical Properties
Optical Properties, Spectroscopy of Matter
Natural Sciences
Research Areas Based on Academic Activities
Avesis Research Areas
WoS Research Areas
Scopus Research Areas
Academic Positions
1993 - Continues
1993 - ContinuesAssociate Professor
Kocaeli University, Fen Edebiyat Fakültesi, Fizik
Non Academic Experience
2015 - Continues
2015 - ContinuesÖĞRETİM ÜYESİ
FMV IŞIK ÜNİVERSİTESİ, ÖĞRETİM ÜYESİ
Articles
All (48)
SCI-E, SSCI, AHCI (21)
SCI-E, SSCI, AHCI, ESCI (22)
ESCI (1)
Scopus (22)
TRDizin (5)
Other Publications (22)
2026
20261. Optimization of laser-texturing process parameters of Ti6Al4V alloys using metaheuristic algorithms
Ürgün S., Yiğit H., Fidan S., Sınmazçelik T., Canel T.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
, vol.240, no.1, pp.789-801, 2026 (SCI-Expanded, Scopus)
2025
20252. Optimization of Fiber Laser Parameters for Reduced Root Mean Square Deviation along the Surface (Sq) for a Surface with a Smaller Coefficient of Friction
CANEL T.
International Journal on Applied Physics and Engineering , vol.4, pp.111-120, 2025 (Peer-Reviewed Journal)
2025
20253. Optimizing Laser Surface Texturing Parameters with the Taguchi Method to Reduce Heat Tint Formation on ST52 Structural Steel
CANEL T.
Natural and Applied Sciences Journal , vol.3, no.1, 2025 (Peer-Reviewed Journal)
2025
20254. Investigation of the Laser Parameters that Should Be Used to Optimize the Root Mean Square Height Value, One of the Roughness Parameters Required to Obtain a More Hydrophobic Surface
CANEL T., Pilavcı Ç., Tosunoğlu Ş.
NATURAL & APPLIED SCIENCES JOURNAL , vol.3, no.1, 2025 (Peer-Reviewed Journal)
2025
20255. Mathematical modeling and CFD analysis with experimental investigation of the geometry of the grooves created with CO2 laser on the polycarbonate plate
Canel T., Bağlan İ., Karabaş M. O.
International Journal of Advanced Manufacturing Technology
, vol.138, no.3, pp.919-938, 2025 (SCI-Expanded, Scopus)
2025
20256. Investigation of surface structuring and oxidation performance of Inconel 718 superalloy by laser remelting with different patterns
FİDAN S., ÜRGÜN S., ATAPEK Ş. H., Celik G. A., CANEL T., SINMAZÇELİK T., et al.
ENGINEERING FAILURE ANALYSIS
, vol.167, 2025 (SCI-Expanded, Scopus)
2024
20247. Determination of the Optimum Laser Processing Parameters Required to Obtain a Stable Hydrophobic Surface on the Surface of AA1050 Aluminum Alloy
ÜRGÜN S., BORA M. Ö., FİDAN S., TOSUNOĞLU Ş., CANEL T.
Natural and Applied Sciences Journal , vol.7, no.2, pp.69-85, 2024 (TRDizin)
2024
20248. Investigation of the Effects of Carbon Dioxide Laser Texturing Parameters on Roughness and Contact Angle for Dual-Phase Steel (DP 1180)
ÜRGÜN S., CANEL T.
Journal of Materials Engineering and Performance
, vol.33, no.14, pp.6880-6894, 2024 (SCI-Expanded, Scopus)
2024
20249. Investigation of Groove Width Created by Fiber Laser on ST52 Steel
ÜRGÜN S., BORA M. Ö., FİDAN S., CANEL T.
NATURAL & APPLIED SCIENCES JOURNAL
, vol.7, no.1, pp.45-60, 2024 (Peer-Reviewed Journal)
2024
202410. The Effect of Laser Power and Laser Exposure Time for Cavity Created on Al2O3 Ceramic Surface
Pilavcı Ç., Tabak Y., Ürgün S., Canel T.
Kocaeli Journal of Science and Engineering , vol.7, no.1, pp.81-88, 2024 (Peer-Reviewed Journal)
2024
202411. Experimental Investigation and Mathematical Modeling of Heat Distribution on a Laser-Treated PMMA Surface
BAĞLAN İ., CANEL T., BAYRAK M. A.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
, vol.49, no.1, pp.1207-1216, 2024 (SCI-Expanded, Scopus)
2023
202312. Determination of the CO2 Laser Parameters on Dimple Geometry on Al2O3 Ceramic Surface
Pilavcı Ç., TABAK Y., ÜRGÜN S., CANEL T.
Izmir Democracy University , 2023 (Peer-Reviewed Journal)
2023
202313. Using CO2 Laser, Optimization of Laser Power, Exposure Time and Frequency for Cavity Formation on Hardox Steel Plate
CANEL T., ÜRGÜN S.
Izmir Democracy University , 2023 (Peer-Reviewed Journal)
2023
202314. Investigation of the Effects of the Different Laser Powers on the Steel Surface
Canel T.
Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi , vol.16, no.1, pp.1-5, 2023 (Peer-Reviewed Journal)
2023
202315. Optimization with Taguchi Method of Laser Parameters Necessary for Smooth Groove Bottom in ZAMAK 5
Canel T., Bağlan İ.
Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi / Institute of Natural and Applied Science Journal , vol.15, no.2, pp.60-64, 2023 (Peer-Reviewed Journal)
2022
202216. Analysis of Inverse Euler-Bernoulli Equation with periodic boundary conditions
BAĞLAN İ., CANEL T.
Turkish Journal of Science , vol.7, no.3, pp.146-156, 2022 (Peer-Reviewed Journal)
2022
202217. Improvement of reference gas calorimeter to measure the gross calorific value of the reference methane gas having high purity (99.995%) and calculation of uncertainty
Ozcan K., Canel T., Tarcan E.
ACCREDITATION AND QUALITY ASSURANCE
, vol.27, pp.85-91, 2022 (SCI-Expanded, Scopus)
2021
202118. The effects of laser machining parameters on roughness and contact angle for boron carbide ceramic surfaceEinfluss der Laserbearbeitungsparameter auf die Rauigkeit und den Kontaktwinkel von Borkarbid-Keramik-Oberflachen
Canel T., Golbasi F., Gezer Z.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
, vol.52, no.12, pp.1382-1393, 2021 (SCI-Expanded, Scopus)
2021
202119. The Effect of CO2 Laser Scan Speed on the Properties of Groove Created on Stainless Steel Plate
CANEL T., Gölbaşı F., Gezer Z.
Eastern Anatolian Journal of Science , vol.7, no.2, pp.23-27, 2021 (Peer-Reviewed Journal)
2021
202120. Continuous Dependence on Data for a Solution of Higher Order Quasi-Linear Parabolic Equation Using Fourier Method
BAĞLAN İ., CANEL T.
Eastern Anatolian Journal , vol.7, no.2, pp.35-41, 2021 (Peer-Reviewed Journal)
2021
202121. Mathematical Modeling of the Shape of Cavity Created with Laser Using Melting, Boiling Temperature.
CANEL T., BAĞLAN İ.
Turkish Journal of Science , vol.6, no.3, pp.162-166, 2021 (Peer-Reviewed Journal)
2021
202122. Fourier Method for Higher Order Quasi-Linear Parabolic Equation Subject with Periodic Boundary Conditions
BAĞLAN İ., CANEL T.
Turkish Journal of Science , vol.6, no.2, pp.110-121, 2021 (Peer-Reviewed Journal)
2021
202123. Laser process parameter optimization of dimple created on oriented carbon fiber reinforced epoxy composites
Canel T., Kayahan E., Fidan S., Sınmazçelik T.
JOURNAL OF COMPOSITE MATERIALS
, vol.55, no.27, pp.4029-4043, 2021 (SCI-Expanded, Scopus)
2021
202124. Laser parameter optimization for surface texturing of inconel 626Optimierung von Laserstrahlparametern zur Oberflachentexturierung von Inconel 625
FİDAN S., CANEL T., SINMAZÇELİK T.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
, vol.52, no.3, pp.289-307, 2021 (SCI-Expanded, Scopus)
2020
202025. Mathematical Modeling of the Effect of CO2 Laser Power on Texture Size on Polyoxmethylene (POM) Sheet
Canel T., Bağlan İ.
Turkish Journal of Science , vol.5, no.3, pp.252-256, 2020 (Peer-Reviewed Journal)
2020
202026. Continuous Dependence on Data for a Solution of determination of an unknown source of Heat Conduction of Poly(methyl methacrylate) (PMMA)
Bağlan İ., Canel T.
Turkish Journal of Science , vol.5, no.3, pp.214-219, 2020 (Peer-Reviewed Journal)
2020
202027. Mathematical Modeling of the Eect of CO2 Laser Power on TextureSize on Polyoxmethylene (POM) Sheet
CANEL T., BAĞLAN İ.
TURKISH JOURNAL OF SCIENCE , vol.5, no.3, pp.252-256, 2020 (Peer-Reviewed Journal)
2020
202028. An inverse coefficient problem for quasilinear pseudo-parabolic of heat conduction of Poly(methyl methacrylate) (PMMA)
Bağlan İ., Canel T.
Turkish Journal of Science , vol.5, no.3, pp.199-207, 2020 (Peer-Reviewed Journal)
2020
202029. Mathematical Modeling of the Effect of CO2 Laser Parameter on Shape and Geometry of Polymer Plate
Canel T., Bağlan İ.
Turkish Journal of Science , vol.5, no.3, pp.257-261, 2020 (Peer-Reviewed Journal)
2020
202030. Mathematical modeling of heat distribution on carbon fiber Poly(ether-ether-ketone) (PEEK) composite during laser ablation
Canel T., Bağlan İ., Sınmazçelik T.
Optics and Laser Technology
, vol.127, 2020 (SCI-Expanded, Scopus)
2019
201931. Laser parameters optimization of surface treating of Al 6082-T6 with Taguchi method
Canel T., Zeren M., Sınmazçelik T.
OPTICS AND LASER TECHNOLOGY
, vol.120, 2019 (SCI-Expanded, Scopus)
2019
201932. Influence of laser parameters in surface texturing of polyphenylene sulfide composites
CANEL T., KAYAHAN E., CANDAN L., FİDAN S., SINMAZÇELİK T.
Journal of Applied Polymer Science
, vol.136, no.38, 2019 (SCI-Expanded, Scopus)
2019
201933. Mathematical modelling of laser ablation of random oriented short glass fiber reinforced Polyphenylene sulphide (PPS) polymer composite
Canel T., Bağlan İ., Sınmazçelik T.
OPTICS AND LASER TECHNOLOGY
, vol.115, pp.481-486, 2019 (SCI-Expanded, Scopus)
2019
201934. MATHEMATICAL MODELING OF THE DEPENDENCE OF HEAT DISTRIBUTION ON DIRECTION IN SURFACE TEXTURING OF CONTINUOUS CARBON FIBRE REINFORCED EPOXY COMPOSITES BY ND.YAG LASER
CANEL T., BAĞLAN İ.
TWMS JOURNAL OF APPLIED AND ENGINEERING MATHEMATICS
, vol.9, no.1, pp.49-57, 2019 (ESCI, Scopus, TRDizin)
2017
201735. Akdağ Kütlesinde Pleistosen buzullaşmalarının jemorfolojik özellikleri ve optik uyarmalı lüminesans (OSL) ile yaşlandırılması
BAYRAKDAR C., GÜNEÇ KIYAK N., TUROĞLU H., ÖZTÜRK T., CANEL T.
TÜRK COĞRAFYA DERGİSİ
, no.69, pp.27-37, 2017 (TRDizin)
2017
201736. Akdağ Kütlesi’nde (Batı Toroslar) Pleistosen buzullaşmalarının jeomorfolojik özellikleri ve optik uyarmalı lüminesans (OSL) ile yaşlandırılması
Bayrakdar C., CANEL T., Kıyak N. G., Turoğlu H., Öztürk T.
TÜRK COĞRAFYA DERGİSİ , vol.69, pp.27-37, 2017 (TRDizin)
2013
201337. Optimization of parameters for depth resolution of galvanized steel by LIBS technique
CANEL T., DEMIR P., KAÇAR E., OZTOPRAK B., AKMAN E., GUNES M., et al.
OPTICS AND LASER TECHNOLOGY
, vol.54, pp.257-264, 2013 (SCI-Expanded, Scopus)
2013
201338. Age, composition and paleoenvironmental significance of a Late Pleistocene eolianite from the western Black Sea coast of Turkey
Erginal A. E., Kiyak N. G., Ekinci Y. L., DEMİRCİ A., Ertek A., CANEL T.
QUATERNARY INTERNATIONAL
, vol.296, pp.168-175, 2013 (SCI-Expanded, Scopus)
2012
201239. Parameter optimization of nanosecond laser for microdrilling on PVC by Taguchi method
CANEL T., KAYA A. U., CELIK B.
OPTICS AND LASER TECHNOLOGY
, vol.44, no.8, pp.2347-2353, 2012 (SCI-Expanded, Scopus)
2009
200940. Laser welding of Ti6Al4V titanium alloys
Akman E., Demir A., Canel T., Sınmazçelik T.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
, vol.209, no.8, pp.3705-3713, 2009 (SCI-Expanded, Scopus)
2009
200941. Characterization of the drilling alumina ceramic using Nd:YAG pulsed laser
KAÇAR E., MUTLU M., AKMAN E., DEMİR A., CANDAN L., CANEL T., et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
, vol.209, no.4, pp.2008-2014, 2009 (SCI-Expanded, Scopus)
2008
200842. INVESTIGATION OF EFFECT OF DIFFERENT ANODISATION CURRENT ON POROUS SILICON BY STM
CANEL T., Bektöre Y.
SAÜ Fen Edebiyat Dergisi , vol.2, pp.83-92, 2008 (Peer-Reviewed Journal)
2007
200743. Optimization of Nd:YAG Laser Welding of Magnesium
DEMİR A., AKMAN E., CANEL T., Ertuerk S., KAYA A. A., Kenar N., et al.
JOURNAL OF LASER MICRO NANOENGINEERING
, vol.2, no.1, pp.108-113, 2007 (SCI-Expanded, Scopus)
2007
200744. Optimizatin Of Pulsed Nd YAG Laser ParametersFor TitaniumSeam Welding
AKMAN E., CANEL T., DEMİR A., SINMAZÇELİK T.
American Institute of Physics , pp.303-304, 2007 (Peer-Reviewed Journal)
2007
200745. Progresses on the Theoretical and Experimental Studies in Laser Technologies Research and Application Center In Kocaeli
AKMAN E., ATALAY B., CANDAN L., CANEL T., DEMİR A., DEMİR P., et al.
American Institute of Physics , vol.899, pp.331-332, 2007 (Peer-Reviewed Journal)
2006
200646. Equivalent dose in quartz from young samples using the SAR protocol and the effect of preheat temperature
KIYAK N. G., Canel T.
RADIATION MEASUREMENTS
, vol.41, pp.917-922, 2006 (SCI-Expanded, Scopus)
2006
200647. Investigation of effects of double pulse configuration on efficiency of Ni-like and Co-like X-ray resonance lines emitted from laser produced silver plasmas
Canel T., DEMIR A., Kenar N.
CZECHOSLOVAK JOURNAL OF PHYSICS
, vol.56, 2006 (SCI-Expanded, Scopus)
2004
200448. A METHOD OF PRECISE CALIBRATION FOR PIEZOELECTRICAL ACTUATORS
CANEL T., Bektöre Y.
Uludağ University Journal of The Faculty of Engineering , vol.9, no.1, pp.147-152, 2004 (TRDizin)
Papers Presented at Peer-Reviewed Scientific Conferences
2025
20251. Laser–Material Interaction Dynamics and Surface Topography Optimization on ST52 Steel: Correlation Between Friction Coefficient and Maximum Valley Depth (Sv)
Canel T.
2nd KOCAELI SCIENCE CONGRESS (KOSC-2025), Kocaeli, Turkey, 20 - 23 November 2025, pp.1-5, (Full Text)
2025
20252. EFFECTS OF LASER PROCESSING PARAMETERS ON THE ARITHMETIC AVERAGE HEIGHT (SA) AND HYDROPHOBICITY OF ST52 STEEL SURFACE
Pilavcı Ç., Tosunoğlu Ş., CANEL T.
TURKISH PHYSICAL SOCIETY 41 ST INTERNATIONAL PHYSICS CONGRESS, Muğla, Turkey, 01 September 2025, vol.1, (Full Text)
2025
20253. Laser–Material Interaction Dynamics and Surface Topography Optimization on ST52 Steel: Correlation Between Friction Coefficient and Maximum Valley Depth (Sv)
CANEL T.
2nd KOCAELI SCIENCE CONGRESS (KOSC-2025), Kocaeli, Turkey, 19 November 2025, vol.1, (Full Text)
2024
20244. Optimization of the Laser Machining Parameters on Groove’s Shape on S420MC Stainless Steel Surface Obtained with Fiber Laser
Pilavcı Ç., Gezer Z., Canel T.
4th International Symposium on Characterization, Sakarya, Turkey, 16 - 18 October 2024, pp.333-342, (Full Text)
2024
20245. Laser Surface Texturing of AA1050 Aluminum Alloy: Optimization of Geometric Patterns and Laser Parameters for Enhanced Surface Characteristics
Pilavcı Ç., ÜRGÜN S., FİDAN S., BORA M. Ö., ÜRGÜN D.
4th International Symposium on Characterization, Sakarya, Turkey, 16 - 18 October 2024, (Full Text)
2024
20246. OPTIMIZATION OF THE GEOMETRIES OF MICRO-SIZED CAVITIES CREATED BY FIBER LASER ON HARDOX 450 STEEL PLATES BY TAGUCHI METHOD
Canel T.
EGE 11th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, İzmir, Turkey, 1 - 03 June 2024, pp.612-626, (Full Text)
2024
20247. INVESTIGATION of the EFFECT of LASER POWER and LASER SCANNING SPEED on CO2 LASER-GENERATED GROOVES on S700MC PLATES
Canel T.
EGE 11th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, İzmir, Turkey, 1 - 03 June 2024, pp.627-642, (Full Text)
2025
20258. Theoretical Investigation of the Change in Amplitude of Acoustic Waves Passing Through a Pipe with a Micron-Sized Roughened Inner Surface
Pilavcı Ç., GÜVEN E., CANEL T.
2nd KOCAELİ SCIENCE CONGRESS (KOSC-2025), Kocaeli, Turkey, 19 November 2025, (Full Text)
2023
20239. Parameters Optimization for Grooves on Al2O3 Ceramic Surface Using CO2 Laser
Piavcı Ç., Tabak Y., Ürgün S., Canel T.
6th INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES, Antalya, Turkey, 2 November - 05 December 2023, vol.1, no.1, pp.69, (Summary Text)
2023
202310. Investigation of the Effect of Laser Parameters on Grooves Created on S420MC Stainless Steel
Canel T., Gezer Z.
6th INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES, Antalya, Turkey, 2 - 05 November 2023, vol.1, no.1, pp.73, (Summary Text)
2023
202311. CFD Analysis for Heat Distribution on Polycarbonate Plate
Karabaş M. O., Bağlan İ., Canel T.
6th INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES, Antalya, Turkey, 2 - 05 November 2023, vol.1, no.1, pp.77, (Summary Text)
2023
202312. Optimization of Depth and Width Size of Dimple’s Heat Affected Zone Created by CO2 Laser on Polyamide Plate
Canel T., Bağlan İ., Ürgün S.
6th INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES, Antalya, Turkey, 2 November - 05 December 2023, vol.1, no.1, pp.11, (Summary Text)
2023
202313. Investigation of an inverse coefficient problem for semi-linear parabolic heat conduction
Bağlan İ., Canel T.
ICOLES,2023, Antalya, Turkey, 2 - 04 November 2023, pp.15, (Summary Text)
2023
202314. Metal Organic Cage Structures Applications on Quartz Crystal Microbalance Sensor
Pilavcı Ç., Harbeck M., Erol M., Harbeck S., CANEL T.
3rd International Symposium on Characterization (ISC´23), İstanbul, Turkey, 06 September 2023, vol.1, pp.63-69, (Full Text)
2023
202315. OPTIMIZATION OF THE CO2 LASER PARAMETERS ON DIMPLE TO OBTAIN THE DESIRED GEOMETRY ON AL2O3 CERAMIC SURFACE
Pilavcı Ç., TABAK Y., ÜRGÜN S., CANEL T.
TURKISH PHYSICAL SOCIETY 39TH INTERNATIONAL PHYSICS CONGRESS, Muğla, Turkey, 31 August 2023, vol.1, pp.205, (Summary Text)
2022
202216. Solution of Higher Order Quasi-Linear Parabolic Equation Subject to Periodic Boundary Using Fourier Method
Bağlan İ., Canel T.
Icoles 2022, Antalya, Turkey, 19 - 22 May 2022, pp.220-228, (Full Text)
2022
202217. Investigation of the Effects of CO2 Laser Parameters on the Geometry of the Grooves Formed on the Transparent Polycarbonate (PC) Surface
CANEL T., BAĞLAN İ.
icoles,2022, Antalya, Turkey, 19 May 2022, (Full Text)
2022
202218. Solution of Two Dimension Quasi-Linear Parabolic Equation with Inverse Coefficient
BAĞLAN İ., CANEL T.
icoles,2022, Antalya, Turkey, 19 May 2022, (Full Text)
2022
202219. Optimization of Laser Machining Parameters with Taguchi L9 Orthogonal Array
CANEL T., BAĞLAN İ.
icoles,2022, Antalya, Turkey, 19 May 2022, (Full Text)
2022
202220. Mathematical Modelling of Boundary of Dimple Created on ZAMAK 5 plate with Nd:YAG Laser
CANEL T., BAĞLAN İ.
icoles,2022, Antalya, Turkey, 19 May 2022, (Full Text)
2022
202221. Effects of CO2 Laser Powers on the Width of the Grooves Formed on the Acrylic-Poly(methyl methacrylate) (PMMA) Surface
CANEL T.
5TH INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES, Antalya, Turkey, 19 June 2022, pp.188-194, (Full Text)
2021
202122. Investigation of the Change of Molten Zone and Heat Tint Width of the Laser-Created Groove on Dual-Phase Steel with respect to Laser Scanning Speed
Gölbaşı F., Gezer Z., CANEL T.
4th INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES (ICOLES 2021), Online, Turkey, 23 September 2021, pp.37, (Summary Text)
2021
202123. Mathematical Modeling of the Width of Grooves Created with Laser Beam on Dual-Phase Steel Surface
BAĞLAN İ., CANEL T.
icmrs,2021, Turkey, 22 October 2021, (Full Text)
2021
202124. Solution of Higher Order Quasi-Linear Parabolic Equation Subject to Periodic Boundary Conditions Using Fourier Method
BAĞLAN İ., CANEL T.
icmrs,2021, Turkey, 22 October 2021, (Full Text)
2020
202025. Fourier Methods for Determination of An Unknown Heat Source Poly(Methyl Methacrylate) (PMMA) with Periodic Boundary Conditions
BAĞLAN İ., CANEL T.
3rd INTERNATIONAL CONFERENCEON MATHEMATICAL AND RELATED SCIENCES:CURRENT TRENDS AND DEVELOPMENTSICMRS 2020, ONLINE MEETING, Turkey, 20 - 22 November 2020, (Full Text)
2020
202026. Mathematical Modeling of the Effect of Laser Scan Speed on Size of Texture Created on Polyvinyl Chloride (PVC) Plate
Bağlan İ., Canel T.
ICMRS 2020 , Ordu, Turkey, 20 - 22 November 2020, pp.5-20, (Full Text)
2020
202027. Fourier methods for determination of an unknown heat source of Poly(methyl methacrylate) (PMMA) with periodic boundary conditions
Bağlan İ., Canel T.
ICMRS 2020, Ordu, Turkey, 20 - 22 November 2020, pp.12-22, (Full Text)
2020
202028. An inverse coefficient problem for quasilinear pseudo-parabolic of heat conduction of Poly(methyl methacrylate) (PMMA)
Bağlan İ., Canel T.
ICOLES, İstanbul, Turkey, 11 - 13 December 2020, pp.70-71, (Summary Text)
2020
202029. Investigation of the Effect of Laser Scan Speed on Geometry of Grooves on Polyoxmethylene (POM) Sheet
Bağlan İ., Canel T.
ICOLES, İstanbul, Turkey, 11 - 13 December 2020, pp.17-18, (Summary Text)
2019
201930. Investigation of Directional Dependence of Heat Affected Zone Limits on Laser Pulse Energy
Canel T., Bağlan İ.
2nd INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIEN, İstanbul, Turkey, 27 - 29 June 2019, vol.1, no.1, pp.285-291, (Full Text)
2019
201931. Continuous Dependence on Data for a Solution of Heat Conduction of Polymeric Materials for Pseudo-Parabolic Equation
Bağlan İ., Canel T.
2nd INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES, İstanbul, Turkey, 27 - 29 June 2019, vol.1, no.1, pp.165-171, (Full Text)
2019
201932. Mathematical Modelling of the Effect of Laser Pulse Duration on Heat Affected Zone in Fiber Reinforced Polyphenylene Sulphide (PPS)
Canel T., Bağlan İ.
2ND INTERNATIONAL CONFERENCE ON MATHEMATICAL AND RELATED SCIENCES, Antalya, Turkey, 27 - 30 April 2019, pp.146-151, (Full Text)
2019
201933. Directional Dependence of Cavity Geometry on Laser Pulse Duration in Composites
Canel T., Bağlan İ.
2nd INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES, İstanbul, Turkey, 27 - 29 June 2019, vol.1, no.1, pp.277-283, (Full Text)
2019
201934. TWO-DIMENSIONAL INVERSE PROBLEM FOR HEAT DISTRIBUTION WITH PERIODIC BOUNDARY CONDITION
Bağlan İ., Canel T.
2ND INTERNATIONAL CONFERENCE ON MATHEMATICAL AND RELATED SCIENCES, Antalya, Turkey, 27 - 30 April 2019, vol.1, no.1, pp.84-92, (Full Text)
2019
201935. Continuous Dependence on Data for a Solution of Heat Conduction of Polymeric Materials
Bağlan İ., Canel T.
2ND INTERNATIONAL CONFERENCE ON MATHEMATICAL AND RELATED SCIENCES, Antalya, Turkey, 27 - 30 April 2019, vol.1, no.1, pp.138-145, (Full Text)
2019
201936. Analysis for the Inverse Coefficient of the Pseudo-Parabolic Equation with non-Local Boundary Condition
BAĞLAN İ., CANEL T.
ICOLES 2019INTERNATIONAL CONFERENCEON LIFE AND ENGINEERING SCIENCES, İstanbul, Turkey, 27 - 29 June 2019, vol.1, no.1, pp.155-163, (Full Text)
2019
201937. Investigation the Effect of Laser Energy on Heat Affected Zone (HAZ) in Fiber Reinforced Polyphenylene Sulphide (PPS) and Mathematical Simulation of HAZ Formation
CANEL T., BAĞLAN İ.
2 ND INTERNATIONAL CONFERENCE ON MATHEMATICAL AND RELATED SCIENCES, Antalya, Turkey, 27 - 30 April 2019, vol.1, no.1, pp.119-124, (Full Text)
2019
201938. An inverse coefficient problem for quasilinear pseudo-parabolic heat conduction of polymeric materials
Bağlan İ., Canel T.
International Conference on Mathematics and Mathematics Education, Konya, Turkey, 11 - 13 July 2019, vol.1, no.1, pp.208-209, (Summary Text)
2019
201939. Modeling of temperature distribution as a function of laser energy: Parallel to the fiber axis on poly(ether-ether-ketone) composites
Canel T., Bağlan İ.
International Conference on Mathematics and Mathematics Education (ICMME 2019), Konya, Turkey, 11 - 13 July 2019, vol.1, no.1, pp.210-211, (Summary Text)
2019
201940. 980 MPA DUAL FAZ ÇELİĞE PROJEKSİYON KAYNAĞI İLE CIVATA KAYNATILMASI VE TAGUCHİ YÖNTEMİNİ KULLANARAK PARAMETRE OPTİMİZASYONU SAĞLANMASI
Sınmazçelik T., Canel T.
4. ULUSLARARASI MÜHENDISLIK, MIMARLIK VE TASARIM KONGRESI, İstanbul, Turkey, 23 - 24 April 2019, vol.1, no.1, pp.1115-1124, (Full Text)
2018
201841. ND:YAG LASER DRILLING OF CONTINUOUS CARBON FIBRE REINFORCED EPOXY COMPOSITES
CANEL T., ÇETİN B., FİDAN S., SINMAZÇELİK T.
1st International Conference on Life and Engineering Sciences ICOLES 2018, Girne, Cyprus (Kktc), 2 - 06 September 2018, pp.76-93, (Full Text)
2018
201842. Mathematical Modeling of Ablation of Carbon Fiber Reinforced Plastics by Lase
BAĞLAN İ., CANEL T.
International Conference on Mathematics and Mathematics Education, Ordu, Turkey, 26 - 29 June 2018, (Summary Text)
2018
201843. Mathematical Modeling of Ablation of Carbon Fiber Reinforced Plastics by Laser
CANEL T., BAĞLAN İ.
ICMME-2018 International Conference on Mathematics and Mathematics Education, Ordu, Turkey, 27 June 2018, pp.614, (Summary Text)
2017
201744. Investigation of the UV-VIS Spectra of UV-Irradiated CDI2 Particles
CANEL T., Gezer Z., KAYA A. U., GÜNER S.
Turkish Physical Society 33rd International Physics Congress, Muğla, Turkey, 6 - 10 September 2017, pp.623, (Summary Text)
2017
201745. Investigation of the UV-vis Spectra of UV-irradiated CdI2 particals
CANEL T., gezer z., KAYA A. U., GÜNER S.
33. Uluslararası Tfd kongresi, Muğla, Turkey, 6 - 10 September 2017, pp.623, (Summary Text)
2001
200146. Investigations Of Thermo-Optical Propertıes Of Nickel Coated On Glass Based Material Selective Sufraces
Bektöre Y., CANEL T., ERTÜRK K.
First Hellenic-Turkish International Physics Conference, Muğla, Turkey, 6 - 09 September 2001, pp.80, (Summary Text)
2011
201147. Application of LIBS on Automotive Coatings
Canel T., Genç Öztoprak B., Akman E., Güneş M., Demir A.
6th Euro Mediterranean Symposium on Laser Induced Breakdown Spectroscopy, İzmir, Turkey, 11 September 2011, pp.157, (Full Text)
2011
201148. The Effects Of Nanosecond Pulsed Laser Parameters On The Cavity Which Was Formed On Polymer
Çelik B., CANEL T., KAYA A. U.
Turkish Physical Society 28th International Physics Congress, Muğla, Turkey, 02 September 2011, pp.553, (Full Text)
2011
201149. Optical luminescence dating of eolianite, west Black Sea coast of Turkey
Kıyak N. G., Erginal A. E., Ertek A., CANEL T.
13th International Conference on Luminescence and Electron Spin Resonanace Dating, Torun, Poland, 17 July 2011, pp.108, (Full Text)
2010
201050. Firing temperature of pottery collected from the area of ancient Mesopotamia, Turkey, using luminescence techniques
Polymeris G., CANEL T., Kıyak N. G., Öztürk Gökgöl T.
38th International Symposium on Archaeometry, Tampa Florida, United States Of America, 10 May 2010, pp.53, (Summary Text)
2009
200951. Optically Stimulated Luminescence to Date Coastal Eolianite on the Sile coast, West Black Sea coast of Turkey
Kıyak N. G., Erginal A. E., Ertek A., CANEL T.
Second Asia Pacific Conference on Luminescence and Electron Spin Resonance Dating, İslamabad, India, 12 November 2009, pp.48, (Summary Text)
2008
200852. Lazer Teknolojileri Araştırma ve Uygulama Merkezinde Gerçekleştirilen Nanosaniye Milisaniye ve Femtosaniye Nd YAG Lazerler ile Malzeme İşleme Çalışmaları
AKMAN E., CANDAN L., MESURE M., BABUR S., GENÇ ÖZTOPRAK B., AKKAN Ç. K., et al.
10. Ulusal Optik, Elektro-Optik ve Fotonik Toplantısı, Kocaeli Üniversitesi, Kocaeli, Turkey, 17 October 2008, (Summary Text)
2008
200853. The effect of nanosecond laser's parameters on laser micro-drilled polycarbonate slab
Candan L., Canel T., Akman E., Demir A., Kaçar E.
Türk Fizik Derneği 25. Uluslararası Fizik Kongresi, Muğla, Turkey, 25 - 29 August 2008, (Summary Text)
2008
200854. The effect of the vacuum with different pressure on laser drilled PC
AKMAN E., CANDAN L., CANEL T., DEMİR A., KAÇAR E.
9th International Symposium on Laser Precision Microfabrication, 16 - 20 June 2008
2006
200655. Optimizatin of pulsed Nd : YAG laser parameters for titanium seam-welding
AKMAN E., CANEL T., DEMİR A., SINMAZÇELİK T.
6th International Conference of the Balkan-Physical-Union, İstanbul, Turkey, 22 - 26 August 2006, vol.899, pp.303-304, (Full Text)
2006
200656. Progresses on the theoretical and experimental studies in Laser Technologies Research and Application Center in Kocaeli
AKMAN E., ATALAY B., CANDAN L., CANEL T., DEMİR A., DEMIR P., et al.
6th International Conference of the Balkan-Physical-Union, İstanbul, Turkey, 22 - 26 August 2006, vol.899, pp.331-332, (Full Text)
2005
200557. Investıgatıon Of Electrıcal Propertıes Of Titanium Coated Copper Surfaces Using ARC-PVD
TARCAN E., CANEL T.
TFD 23 International Physics Congress, Muğla, Turkey, 7 - 10 September 2005, (Summary Text)
2005
200558. Investigation Of Electrical Properties Of Titanium Coated Copper Surfaces Using ARC-PVD
TARCAN E., CANEL T.
TFD 23 International Physics Congress, Muğla, Turkey, 02 September 2005, pp.448, (Full Text)
2005
200559. Optically Stimulated Luminescence Dating Using Heated Quartz From Archeological Sites
Kıyak N. G., Canel T.
35 th International Symposium on Archeometry, Beijing, China, 11 - 13 May 2005, pp.49, (Full Text)
2005
200560. Dating of heated quartz samples using the generalized single aliquot regenereative dose protocol
Canel T., Kıyak N. G., Dinçer B.
11 th International Conference and Electron Spin Resonance Dating, Cologne, Germany, 17 - 19 July 2005, pp.36, (Full Text)
2005
200561. Optically Stimulated Luminescence (OSL) Age Determination Using Quartz From Şile
Kıyak N. G., Canel T.
Int. Symp. on the Geody. of East. Med. Active Tect.of the Aegean Reg, İstanbul, Turkey, 7 - 09 June 2005, pp.149, (Full Text)
2005
200562. Application of Thermoluminescence Techniques on Dating of Archeological Materials
Kıyak N. G., Dinçer B., CANEL T.
35 th International Symposium on Archeometry, Bejing, China, 11 May 2005, pp.50, (Summary Text)
2001
200163. Investigations Of Thermo-Optical Propertıes Of Nickel Coated On Copper-Oxide Selective Sufraces
Bektöre Y., CANEL T., TARCAN E.
First Hellenic-Turkish International Physics Conference, Muğla, Turkey, 11 September 2001, pp.227, (Full Text)
2001
200164. Investigations Of Thermo-Optical Properties Of Nickel Coated On Glass Based Material Selective Sufraces
CANEL T., Bektöre Y., Ertürk K.
First Hellenic-Turkish International Physics Conference, Muğla, Turkey, 04 September 2001, pp.80, (Full Text)
1998
199865. Kimyasal Metotla Elde Edilmiş CuO Seçici Yüzeyin Termo-Optik Özelliklerinin İncelenmesi
Bektöre Y., TARCAN E., CANEL T.
TFD 17 Türk Fizik Derneği 17. Fizik Kongresi, Antalya, Turkey, 27 - 31 October 1998, pp.467, (Summary Text)
1998
199866. Sloxene Yapıların ve Gözenekli Silisyumun İnfrared Spektrumlarının İncelenmesi
YÜKSEL B., KAYAHAN E., CANEL T., ÖZKAZANÇ E., KAYA A. U.
TFD Ulusal Fizik Kmgresi 17, Turkey, 27 - 31 October 1998
1998
199867. Scanning Tunneling Microscope
Bektöre Y., CANEL T., Ellialtıoğlu R.
International Wokshop on Solid State and Plasma Physics, Kocaeli, Turkey, 19 May 1998, pp.182-186, (Full Text)
1998
199868. Investigation of Thermo-Optical Properties of PMMA Spin on Coated Selective and Protective Surface
Bektöre Y., CANEL T., TARCAN E.
International Wokshop on Solid State and Plasma Physics, Kocaeli, Turkey, 19 May 1998, pp.187-188, (Full Text)
1997
199769. Heat Effect of Exposed MOS Structure
CANEL T., Bektöre Y., KAYA A. U.
3. General Conference of The Balkan Physics Union, Cluj-Napoca, Romania, 8 - 12 September 1997, pp.2429-2432, (Full Text)
1997
199770. Heat Effect of Exposed MOS Structure
CANEL T., Bektöre Y., Doğan N., KAYA A. U.
3. General Conference of The Balkan Physics Union, Cluj-Napoca, Romania, 08 September 1997, pp.2429-2432, (Full Text)
1996
199671. MOS Yapılarda Gama Radyasyonunun Etkileri
CANEL T., Bektöre Y., TARCAN E., VAROL H. S.
TFD-16 Türk Fizik Derneği 16. Fizik Kongresi, 19 - 23 August 1996, pp.9, (Summary Text)
Books
2025
20251. 8. Chapter 102 Laser Roughening of Metal Surfaces: An Exemplary Study on the Application of Surface Roughness Parameters
CANEL T.
in: NEW CONCEPT AND ADVANCED STUDIES IN NATURAL SCIENCE AND MATEMATISC, ÖZDEMİR CANAN, Editor, All Sciences Academy, İstanbul, pp.102-126, 2025
Funded Projects
2019 - 2021
2019 - 2021PPSin Yüzey Tekstüre İşleminde Lazer Atım Süresinin ve Atım Enerjisinin Yüzey Kalitesi Üzerine Etkisinin İncelenmesi
Project Supported by Higher Education Institutions , BAP Research Project
CANEL T. (Executive)
2018 - 2020
2018 - 2020Bor Ovası’nda (Niğde) Pleistosen’xxden Holosen’xxe Kadar Meydana Gelen İklimsel Değişiklikler
TUBITAK Project , 3001 - Initial R&D Projects Support Program
Bayer Altın T. V.(Executive), Canel T.
2018 - 2019
2018 - 2019POLİMER NANOKOMPOZİT FİLMLERİN OPTİK VE DİELEKTRİK ÖZELLİKLERİNİN KOŞULLARA BAĞLI OLARAK İNCELENMESİ
Project Supported by Higher Education Institutions , BAP MSc
CANEL T. (Executive), GEZER Z.
2014 - 2015
2014 - 2015CD TUZU İÇEREN POLMER MALZEMELERE UYGULANAN FARKLI DALGA..
Project Supported by Higher Education Institutions , BAP Other
CANEL T. (Executive)
2008 - 2010
2008 - 2010Libs Tekniğini Uv Vis Spektrometre İle Geliştirerek Otomotiv Sektöründe Kullanilan Galvaniz Kapli Saç Levhalarin Boya Öncesi Ve Sonrasi Kaplama Kalinliğinin Ölçülmesi Ve Yüksek Çözünürlüklü Nitel Ve Nicel Analizi
TUBITAK Project , 1001 - Program for Supporting Scientific and Technological Research Projects
Canel T. (Executive)
2008 - 2009
2008 - 2009Uzun Milisaniye Ve Kısa Atımlı Nanosaniye Lazerler Kullanarak Polimer Ve Takviyeli Kompozit Polimerler Üzerinde Açılan Mikro Ölçekli Deliklerin Optimum Parametrelerinin Belirlenmesi
Project Supported by Higher Education Institutions , BAP Research Project
(Project Abstract)
Canel T. (Executive), Kaçar E., Candan L., Genç Öztoprak B., Akman E.
Peer Reviews in Scientific Publications
January 2020
January 2020OPTICS AND LASER TECHNOLOGY
SCI Journal
December 2019
December 2019ADVANCES IN MANUFACTURING
SCI Journal
July 2019
July 2019Turkish Journal of Physics
Journal Indexed in ESCI
July 2016
July 2016Surface and Coatings Technology
SCI Journal
April 2016
April 2016Journal of King Saud University
SCI Journal
March 2014
March 2014Advances in Manufacturing
SCI Journal
September 2012
September 2012Optics & Laser Technology
SCI Journal
April 2008
April 2008Journal of Materials Processing Technology
SCI Journal
Roles in Event Organizations
Kasım 2023
Kasım 20236. Internatıonal Conference on Lıfe and Engıneerıng Scıences
Scientific Congress
Güven E., CANEL T.
Turkey
Eylül 2021
Eylül 20214TH INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES
Scientific Congress
Canel T., BAĞLAN İ.
İstanbul, Turkey
Eylül 2021
Eylül 2021ICOLES 2021 4TH INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES
Scientific Congress
Canel T.
İstanbul, Turkey
Aralık 2020
Aralık 20203RD INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES
Scientific Congress
Canel T.
İstanbul, Turkey
Aralık 2020
Aralık 20203rd INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES, 7STANBUL, TURKEY ICOLES 2020
Scientific Congress
Canel T.
Turkey
Aralık 2019
Aralık 2019ICOLES 2019 INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES
Scientific Congress
Canel T., BAĞLAN İ.
İstanbul, Turkey
Eylül 2018
Eylül 2018ICOLES 2018 INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES
Scientific Congress
Canel T., BAĞLAN İ.
İstanbul, Turkey