Yayınlar & Eserler

Yayın Ağı
Makaleler 60
Tümü (60)
SCI-E, SSCI, AHCI (26)
SCI-E, SSCI, AHCI, ESCI (32)
ESCI (1)
Scopus (39)
TRDizin (11)
Diğer Yayınlar (11)

1. Effect of Spraying Distance on the Scratch Wear Behavior of 8YSZ and Gd-Yb-Y Co-Doped ZrO2 TBCs

Güneş A. H., Fidan S., Atapek Ş. H., Bora M. Ö., Ürgün S., Özsoy M. İ., et al.
Coatings , cilt.16, sa.3, ss.1-27, 2026 (Scopus)

2. Optimization of laser-texturing process parameters of Ti6Al4V alloys using metaheuristic algorithms

Ürgün S., Yiğit H., Fidan S., Sınmazçelik T., Canel T.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , cilt.240, sa.1, ss.789-801, 2026 (SCI-Expanded, Scopus) identifier identifier

3. Effects of Pressurized Water Aging on Reciprocating Friction and Wear of FDM 3D-Printed PLA and Glass Fiber Reinforced PLA Composites

Fidan S., Ürgün S., Karslı Yılmaz N. G., Yılmaz T., Bora M. Ö., Özsoy M. İ.
Polymers , cilt.18, sa.3, ss.1-40, 2026 (Scopus)

4. Effect of thermo-mechanical treatments on the structural properties and tribological behavior of precipitation hardenable Cu-4Ti (wt%) alloy

Konieczny J., Labisz K., Atapek Ş. H., Fidan S., Bora M. Ö., Ürgün S.
TRIBOLOGY INTERNATIONAL , cilt.214, 2026 (SCI-Expanded, Scopus) identifier

5. Validating a Hashin‐Based Shell Model for LVI of Woven E‐Glass/Epoxy Laminates

Özsoy M. İ., Fidan S., Ürgün S., Bora M. Ö., Yakar E. C.
Polymer Composites , cilt.1, sa.1, ss.1-19, 2026 (Hakemli Dergi)

6. Laser Surface Texturing of AA1050 Aluminum to Enhance the Tribological Properties of PTFE Coatings with a Taguchi-Based Analysis

Canel T., Fidan S., Bora M. Ö., Ürgün S., Ürgün D. T., Özsoy M. İ.
lubricants , cilt.14, sa.39, ss.1-35, 2026 (Hakemli Dergi) Creative Commons License

7. COMPARISON OF WATER ABSORPTION AND RADIOPACITY OF PLA AND PETG WITH PMMA AND CLIP-F. .

SAÇU E., OĞHAN TÜRKOĞLU M., TURGUT V., YERSEL G., FİDAN S., BORA M. Ö., et al.
Selcuk Dental Journal , cilt.12, sa.3, ss.377-381, 2025 (Scopus, TRDizin)

8. Tribological Response of Basalt/Carbon Hybrid Laminated Composites After Water-Immersion Aging: Influence of Stacking Sequence Under Reciprocating Wear

Fidan S., Ürgün S., Özsoy M. İ., Bora M. Ö., Kutluk T., Güleç E.
POLYMERS , cilt.18, sa.1, 2025 (SCI-Expanded, Scopus) identifier identifier identifier

9. Tribological Performance of Glass/Kevlar Hybrid Epoxy Composites: Effects of Pressurized Water-Immersion Aging Under Reciprocating Sliding Wear

Özsoy M. İ., Bora M. Ö., Ürgün S., Fidan S., Güleç E.
Polymers , cilt.17, sa.21, ss.1-32, 2025 (Scopus) Creative Commons License

10. Effect of laser induced remelting on the scratch behavior of spark plasma sintered nickel aluminide alloy

Aktaş Çelik G., Aksu F., Yılmaz Güler F. B., Ürgün S., Fidan S., Bora M. Ö., et al.
Materials Chemistry and Physics , cilt.345, 2025 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

11. Tribological Response of Glass Fiber/Polyester Composites After Pressurized Water-Immersion Aging Assessed by Reciprocating and Ball-on-Disc Wear Testing

Fidan S., Ürgün S., Özsoy M. İ., Bora M. Ö., Güleç E.
Polymers , cilt.1, sa.1, ss.1-36, 2025 (Scopus) identifier identifier identifier

12. Scratch Resistance and Tribological Enhancement of Epoxy Composites Reinforced with Chopped Glass Fiber and Nano Silica Through Taguchi Analysis

Ozun E., Ceylan R., Bora M. Ö., Fidan S., Ürgün S., Özsoy M. İ., et al.
POLYMERS , cilt.17, sa.2550, ss.1-20, 2025 (Scopus)

13. Machinability of Basalt and Glass Fiber Hybrid Composites in Dry Drilling Using TiN/TiAlN-Coated Drill Bits

Özsoy M. İ., Ürgün S., Fidan S., Yarar E., Güleç E., Bora M. Ö.
Polymers , cilt.17, sa.2172, ss.1-33, 2025 (Scopus) Creative Commons License identifier identifier identifier

14. Characterization of laser surface burns generated with different fiber laser parameters: the role of air and nitrogen environments

Yüşen A., Fidan S., Ürgün S., Bora M. Ö., Atapek Ş. H.
MATERIALS RESEARCH EXPRESS , cilt.12, sa.7, 2025 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

15. Comprehensive Sliding Wear Analysis of 3D-Printed ABS, PLA, and HIPS: ANOVA, SEM Examination, and Wear Volume Measurements with Varying Layer Thickness

FİDAN S., ÜRGÜN S., ŞAHİN A. E., BORA M. Ö., YILMAZ T., Ozsoy M. I.
POLYMERS , cilt.17, sa.14, 2025 (SCI-Expanded, Scopus) Creative Commons License Sürdürülebilir Kalkınma identifier identifier identifier

16. Drilling Machinability of Glass, Basalt, and Hybrid Epoxy Composites: Thrust Force, Thermal Load, and Hole Quality

Yarar E., Özsoy M. İ., Fidan S., Ürgün S., Bora M. Ö.
POLYMERS , cilt.17, sa.12, ss.1-27, 2025 (Scopus) Creative Commons License identifier identifier identifier

17. Modelling of Hardness and Electrical Conductivity of Cu-4Ti (wt.%) Alloy and Estimation of Aging Parameters Using Metaheuristic Algorithms

Konieczny J., Labisz K., Ürgün S., Yiğit H., Fidan S., Bora M. Ö., et al.
MATERIALS , cilt.18, sa.10, 2025 (SCI-Expanded, Scopus) identifier identifier identifier

18. Stacking Sequence Effect of Basalt/Carbon Hybrid Laminated Composites on Solid Particle Erosion Behavior: From Ambient to Elevated Temperatures

Özsoy M. İ., Fidan S., Bora M. Ö., Ürgün S.
Polymers , cilt.17, sa.10, ss.1-22, 2025 (Scopus) identifier identifier identifier

19. Decomposition of matrix in basalt fiber-reinforced composites using laser processing parameters for clear unveiling of fibers without damage

Ürgün S., Fidan S., Ozsoy M. I., Bora M. Ö.
POLYMER COMPOSITES , sa.5, ss.4281-4301, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

20. Enhancing Wear Resistance and Adhesion of Primer Coatings on Laser-Textured Milled Carbon Fiber-Filled Basalt Composites

Coskun O., FİDAN S., Ozsoy M. I., BORA M. Ö., ÜRGÜN S., ŞAHİN A. E., et al.
POLYMERS , cilt.17, sa.9, 2025 (SCI-Expanded, Scopus) Creative Commons License Sürdürülebilir Kalkınma identifier identifier identifier

21. Understanding the Damage Mechanisms of Basalt/Carbon Fiber Hybrid Composites Under Quasi-Static and Dynamic Loadings

Özsoy M. İ., Fidan S., Bora M. Ö., Ürgün S.
Polymers , cilt.7, sa.17, ss.1-28, 2025 (Scopus) identifier identifier identifier

22. Metaheuristics Algorithm-Based Optimization for High Conductivity and Hardness CuNi2Si1 Alloy

Konieczny J., Labisz K., ÜRGÜN S., YİĞİT H., FİDAN S., BORA M. Ö., et al.
MATERIALS , cilt.18, sa.5, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier identifier

23. Scratch load and indenter type dependent scratch evaluation of milled carbon fiber filled basalt fiber/epoxy composites with factorial design

Fidan S., Ürgün S., Bora M. Ö., Özsoy M. I.
POLYMER COMPOSITES , cilt.46, sa.3, ss.2826-2846, 2025 (SCI-Expanded, Scopus) identifier identifier

24. On the surface characterization of laser treated DIN 1.2379 tool steel

Uçakkuş Ö. E., Zeren A., Ürgün S., Fidan S., Atapek Ş. H., Ceylan R., et al.
JOURNAL OF LASER APPLICATIONS , cilt.37, sa.1, 2025 (SCI-Expanded, Scopus) identifier identifier

25. Prediction of solid particle erosion behavior in PMMA using artificial neural network and metaheuristic algorithms

FİDAN S., ÜRGÜN S., YİĞİT H.
NEURAL COMPUTING AND APPLICATIONS , cilt.37, ss.2825-2847, 2025 (Scopus) identifier

26. Investigation of surface structuring and oxidation performance of Inconel 718 superalloy by laser remelting with different patterns

FİDAN S., ÜRGÜN S., ATAPEK Ş. H., Celik G. A., CANEL T., SINMAZÇELİK T., et al.
ENGINEERING FAILURE ANALYSIS , cilt.167, 2025 (SCI-Expanded, Scopus) identifier identifier

27. Determination of the Optimum Laser Processing Parameters Required to Obtain a Stable Hydrophobic Surface on the Surface of AA1050 Aluminum Alloy

ÜRGÜN S., BORA M. Ö., FİDAN S., TOSUNOĞLU Ş., CANEL T.
Natural and Applied Sciences Journal , cilt.7, sa.2, ss.69-85, 2024 (TRDizin)

28. Comparative evaluation of solid particle erosion resistance in milled carbon fiber-reinforced basalt fiber epoxy composites: Impact of abrasive shape variations

Ürgün S., Özsoy M. İ., Bora M. Ö., Fidan S.
POLYMER COMPOSITES , cilt.45, sa.16, ss.15356-15379, 2024 (SCI-Expanded, Scopus) identifier identifier

29. Advanced hybrid composites: A comparative study of glass and basalt fiber reinforcements in erosive environments

Fidan S., Özsoy M. İ., Bora M. Ö., Ürgün S.
POLYMER COMPOSITES , cilt.45, sa.13, ss.12071-12091, 2024 (SCI-Expanded, Scopus) identifier identifier

30. Scratch resistance of glass-basalt fiber reinforced epoxy hybrid composites: A comparative study

FİDAN S., Ozsoy M. I., ÜRGÜN S., BORA M. Ö.
POLYMER COMPOSITES , cilt.45, sa.13, ss.11940-11959, 2024 (SCI-Expanded, Scopus) identifier identifier

31. Optimization of Laser Cutting Parameters for PMMA Using Metaheuristic Algorithms

ÜRGÜN S., YİĞİT H., FİDAN S., SINMAZÇELİK T.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.49, sa.9, ss.12333-12355, 2024 (SCI-Expanded, Scopus) identifier identifier

32. Investigation of the Effects of Carbon Dioxide Laser Texturing Parameters on Roughness and Contact Angle for Dual-Phase Steel (DP 1180)

ÜRGÜN S., CANEL T.
Journal of Materials Engineering and Performance , cilt.33, sa.14, ss.6880-6894, 2024 (SCI-Expanded, Scopus) identifier identifier

33. Investigation of Groove Width Created by Fiber Laser on ST52 Steel

ÜRGÜN S., BORA M. Ö., FİDAN S., CANEL T.
NATURAL & APPLIED SCIENCES JOURNAL , cilt.7, sa.1, ss.45-60, 2024 (Hakemli Dergi) Creative Commons License

34. The Effect of Laser Power and Laser Exposure Time for Cavity Created on Al2O3 Ceramic Surface

Pilavcı Ç., Tabak Y., Ürgün S., Canel T.
Kocaeli Journal of Science and Engineering , cilt.7, sa.1, ss.81-88, 2024 (Hakemli Dergi)

35. Using CO2 Laser, Optimization of Laser Power, Exposure Time and Frequency for Cavity Formation on Hardox Steel Plate

CANEL T., ÜRGÜN S.
Izmir Democracy University , 2023 (Hakemli Dergi)

36. Determination of the CO2 Laser Parameters on Dimple Geometry on Al2O3 Ceramic Surface

Pilavcı Ç., TABAK Y., ÜRGÜN S., CANEL T.
Izmir Democracy University , 2023 (Hakemli Dergi)

37. Comparison of recent metaheuristic optimization algorithms to solve the SHE optimization problem in MLI

Yiğit H., Ürgün S., Mirjalili S.
NEURAL COMPUTING & APPLICATIONS , cilt.35, sa.10, ss.7369-7388, 2023 (SCI-Expanded, Scopus) identifier identifier

38. Effect of particle flow direction in particle erosion of macro texturized polymer surfaces

Fidan S., Sınmazçelik T., Ürgün S.
Progress in Additive Manufacturing , cilt.7, sa.3, ss.1-16, 2023 (ESCI) Sürdürülebilir Kalkınma identifier identifier

39. Investigation of Recent Metaheuristics Based Selective Harmonic Elimination Problem for Different Levels of Multilevel Inverters

ÜRGÜN S., YİĞİT H., Mirjalili S.
ELECTRONICS , cilt.12, sa.4, 2023 (SCI-Expanded, Scopus) identifier identifier

40. Comparative analysis and manufacturing of airfoil structures suitable for use at low speeds

GÖKDEMİR M., ÜRGÜN S., FİDAN S.
Journal of advanced research in natural and applied sciences (Online) , cilt.8, sa.4, ss.600-613, 2022 (TRDizin) Creative Commons License identifier

41. Kontaktörlerde Anahtarlama Sayısının Elektrik Ark Erozyonuna ve Kontaktör Yüzey Hasarlarına Etkileri

Sav M. N., Fidan S., Ürgün S.
Avrupa Bilim ve Teknoloji Dergisi , cilt.2021, sa.27, ss.722-734, 2021 (TRDizin) Creative Commons License

42. Hoverwing Araçlarda Kaldırma Sistemi için Gövde Tasarımı ve Analizi

Çınkır Ö. Ç., Öztürk T., Ürgün S., Fidan S.
Avrupa Bilim ve Teknoloji Dergisi , sa.27, ss.526-531, 2021 (TRDizin) Sürdürülebilir Kalkınma

43. 2D Investigation of a Wing Concept with a NACA 4412 Airfoil in Ground Effect Operation

Öztürk T., Çınkır Ö. Ç., Ürgün S., Fidan S.
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.9, sa.3, ss.548-561, 2021 (TRDizin)

44. Selective Harmonic Eliminated Pulse Width Modulation (SHE-PWM) Method using Genetic Algorithm in Single-Phase Multilevel Inverters

Ürgün S., Yiğit H.
International Journal on Electrical Engineering and Informatics , cilt.13, sa.1, ss.191-202, 2021 (Scopus)

45. Düşük Maliyetli 6 Eksen Hareketli Uçuş Simülatörü Prototip Tasarımı

Tufan B. H., Ürgün S.
Avrupa Bilim ve Teknoloji Dergisi , cilt.1, sa.20, ss.299-310, 2020 (TRDizin)

46. Benzer Kamburluğa Sahip Kanat Profillerinin Aerodinamik Analizi

Gökdemir M., Ürgün S.
Journal of Aviation , cilt.4, sa.2, ss.25-35, 2020 (Hakemli Dergi)

47. Effects of 3D printed surface texture on erosive wear

Sınmazçelik T., Fidan S., Ürgün S.
Tribology International , cilt.144, 2020 (SCI-Expanded, Scopus) identifier identifier

48. Paletli Tip Havai Çalışma Platformunun Sonlu Elemanlar Yöntemi Kullanılarak Tasarımı ve Üretimi

Ürgün Ö., Güven E. A., Görgen H., Ürgün S.
Kocaeli Üniversitesi Fen Bilimleri Dergisi , cilt.1, sa.3, ss.42-46, 2020 (Hakemli Dergi)

49. 3 Boyutlu Yazıcı ile Üretilen Parça Yüzeylerini Toz Kaplama ve Kaplama Eroziv Aşınma Davranışlarının Karakterizasyonu

Sevil A., Ondört A., Ürgün S., Fidan S.
Avrupa Bilim ve Teknoloji Dergisi , sa.17, ss.1106-1115, 2019 (TRDizin) Creative Commons License Sürdürülebilir Kalkınma

50. Bir Hassas Yaklaşma Prosedürü Olarak ILS’in (Instrument Landing System) Önemi ve Uçuş Gecikme Maliyetlerine Etkisi

Kaba F., Ürgün S.
European Journal of Science and Technology , cilt.15, ss.333-342, 2019 (Hakemli Dergi) Creative Commons License

51. GROUND BASED AUGMENTATION SYSTEM (GBAS)

Başak S., Ulufer R. S., Yılmaz M., Ürgün S., Bilgi C.
Istanbul Aydın Universitesi Dergisi , cilt.11, sa.2, ss.205-215, 2019 (Hakemli Dergi)

52. Hava Araçlarında Kullanılan ULB Cihazlarının Güvenilirlik İncelemesi

Kıvanç E., Ürgün S.
Journal of Aviation , cilt.2, sa.1, ss.36-44, 2018 (TRDizin) Creative Commons License

53. Kablosuz Uçak İçi Eğlence Sistemi Uygulaması ve Gömülü Sistemlere Göre Analizi

Ateş Y., Ürgün S.
Journal of Aviation , cilt.1, sa.2, ss.99-106, 2017 (TRDizin) Creative Commons License

54. Turbofan Ucak Motorlarinin Ucusa Elverisli Tutulmasi Icin Yeni Bir Motor Bakim Sisteminin Tasarimi ve Optimizasyonu

Çolak M. B., Işık Ö., Demirtaş H., Ürgün S., Ulufer S.
Istanbul Aydin Universitesi Dergisi , cilt.8, sa.29, ss.37-49, 2016 (Hakemli Dergi)

55. KONUM KONTROLLÜ 6x6 SERBESTLİK DERECELİ STEWART PLATFORMU NUN TASARIMI MODELLENMESI VE SİMÜLASYONU

Sunguray C., Güngör S., Demirtaş H., Ürgün S.
SDÜ Uluslararası Teknolojik Bilimler Dergis , cilt.6, sa.0, ss.49-61, 2014 (Hakemli Dergi)

56. ZVT-ZCT PWM DC-DC Boost Converter with ZVS-ZCS Auxiliary Circuit

ÇORUH N., ÜRGÜN S., ERFİDAN T., ÖZTÜRK S.
INTERNATIONAL REVIEW OF ELECTRICAL ENGINEERING-IREE , cilt.7, sa.6, ss.5961-5969, 2012 (SCI-Expanded) identifier identifier

57. Zero-voltage transition-zero-current transition pulsewidth modulation DC-DC buck converter with zero-voltage switching-zero-current switching auxiliary circuit

Urgun S.
IET POWER ELECTRONICS , cilt.5, ss.627-634, 2012 (SCI-Expanded, Scopus) identifier identifier

58. Use of genetic algorithms for high hydrostatic pressure inactivation of microorganisms

ÜRGÜN S., Buzrul S.
AFRICAN JOURNAL OF BIOTECHNOLOGY , cilt.10, sa.65, ss.14543-14551, 2011 (SCI-Expanded, Scopus) identifier identifier

59. A new ZVT-ZCT quasi-resonant DC link for soft switching inverters

ÜRGÜN S., ERFİDAN T., BODUR H., ÇAKIR B.
INTERNATIONAL JOURNAL OF ELECTRONICS , cilt.97, sa.1, ss.83-97, 2010 (SCI-Expanded, Scopus) identifier identifier

60. Improved power factor in a low-cost PWM single phase inverter using genetic algorithms

Butun E., Erfidan T., Urgun S.
ENERGY CONVERSION AND MANAGEMENT , sa.11-12, ss.1597-1609, 2006 (SCI-Expanded, Scopus) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 52

1. MODELLING OF LASER ABLATION GEOMETRY AND SURFACE ROUGHNESS ON TI6AL4V USING COMSOL MULTIPHYSICS

YAKAR E. C., FİDAN S., ÜRGÜN S., BORA M. Ö.
EGE 14TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, İzmir, Türkiye, 23 - 29 Aralık 2025, ss.551-562, (Tam Metin Bildiri)

2. ASSESSMENT OF EXPERIMENTAL VARIABLES IN FIBRE LASER PROCESSING OF TI6AL4V ALLOY UTILISING COMSOL SIMULATION

YAKAR E. C., FİDAN S., ÜRGÜN S., BORA M. Ö.
EGE 14TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, İzmir, Türkiye, 23 - 29 Aralık 2025, ss.563-575, (Tam Metin Bildiri)

3. Reciprocating Tribological Response of Basalt/Carbon Hybrid FiberReinforced Composites under Hertzian Contact

Ürgün S., Bora M. Ö., Fidan S., Özsoy M. İ.
3RD INTERNATIONAL CONFERENCE ON RECENT AND INNOVATIVE RESULTS IN ENGINEERING AND TECHNOLOGYICRIRET 2025, Konya, Türkiye, 15 - 16 Kasım 2025, cilt.1, sa.1, ss.58-65, (Tam Metin Bildiri) Creative Commons License

4. Influence of Pressurized Water Aging on the Reciprocating Wear of Basalt-Fiber-Reinforced Polymer Composites: COF, Wear-Track Profilometry, and Mass Change

Bora M. Ö., Ürgün S., Fidan S., Özsoy M. İ.
3RD INTERNATIONAL CONFERENCE ON RECENT AND INNOVATIVE RESULTS IN ENGINEERING AND TECHNOLOGYICRIRET 2025, Konya, Türkiye, 15 - 16 Kasım 2025, cilt.1, sa.1, ss.50-57, (Tam Metin Bildiri) Creative Commons License

5. Synergistic Tribology of Laser-Textured 316L Stainless Steel with Spin-Coated TiO2 Films under Reciprocating Sliding

FİDAN S., BORA M. Ö., ÜRGÜN S., ÖZSOY M. İ., KUTLUK T.
7th International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 25 - 26 Ekim 2025, ss.89-101, (Tam Metin Bildiri)

6. Fiber-Laser Square Texturing of AA2024-T3: Scale Factor and Scanning Speed Effects on Contact Angle and Surface Profilometry

ÇOŞKUN Ö., FİDAN S., BORA M. Ö., ÜRGÜN S., ÖZSOY M. İ.
3rd International Conference on Pioneer and Innovative Studies, Konya, Türkiye, 6 - 07 Ekim 2025, sa.1, ss.147-155, (Tam Metin Bildiri)

7. Parametric Study of Fiber-Laser Circular Microtextures on AA2024-T3: Influence of Scale Factor and Scan Speed on Wettability and Roughness

ÇOŞKUN Ö., FİDAN S., BORA M. Ö., ÜRGÜN S., ÖZSOY M. İ.
Proceeding Book of 3rd International Conference on Pioneer and Innovative Studies ICPIS 2025, Konya, Türkiye, 6 - 07 Ekim 2025, sa.2, ss.156-165, (Tam Metin Bildiri)

8. Reciprocating Sliding Wear Behavior of the 316l Stainless Steel Under Various Test Parameters

ÖZSOY M. İ., FİDAN S., ÜRGÜN S., BORA M. Ö.
6th International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 23 - 24 Haziran 2025, ss.108-118, (Tam Metin Bildiri) Creative Commons License

9. Effect of Fiber Laser Parameters on the Frictional Behavior of Ti6Al4V Alloy under Reciprocating Sliding Conditions

ÖZSOY M. İ., FİDAN S., ÜRGÜN S., BORA M. Ö.
6th International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 23 - 24 Haziran 2025, ss.119-128, (Tam Metin Bildiri) Creative Commons License

10. HAVACILIK UYGULAMALARINDA BONDİNG KABLOLARININ TERMİNAL SIKMA YÖNTEMLERİ VE PERFORMANS ANALİZİ

SUNGURAY C., ÜRGÜN S., FİDAN S., BORA M. Ö.
15th INTERNATIONAL CONGRESS ON ENGINEERING, ARCHITECTURE AND DESIGN, İstanbul, Türkiye, 21 - 22 Haziran 2025, ss.131-138, (Tam Metin Bildiri)

11. AYNI SIKIM YÖNTEMİNE SAHİP BONDİNG KABLOLARININ TİTREŞİM ALTINDAKİ PERFORMANS KARŞILAŞTIRMASI

SUNGURAY C., ÜRGÜN S., FİDAN S., BORA M. Ö.
15th INTERNATIONAL CONGRESS ON ENGINEERING, ARCHITECTURE AND DESIGN, İstanbul, Türkiye, 21 - 22 Haziran 2025, ss.123-130, (Tam Metin Bildiri)

12. Optimizing Laser-Textured Surface Patterns for Hydrophobic and Hydrophilic Control of 316L Steel in Air and Nitrogen

FİDAN S., ÜRGÜN S., BORA M. Ö., ÖZSOY M. İ.
Proceeding Book of 6th International Conference on Scientific and Academic Research ICSAR 2025, Konya, Türkiye, 19 - 20 Mart 2025, sa.1, ss.206-217, (Tam Metin Bildiri)

13. Effect of Laser Surface Texturing Under Controlled Atmospheres on the Wettability of Ti6Al4V Alloy

FİDAN S., ÜRGÜN S., BORA M. Ö., ÖZSOY M. İ.
Proceeding Book of 6th International Conference on Scientific and Academic Research ICSAR 2025, Konya, Türkiye, 19 - 20 Mart 2025, sa.1, ss.218-230, (Tam Metin Bildiri)

14. Laser Surface Treatment Effect on the Wettability of 5754 Aluminum Alloys Under Various Gas Atmosphere

FİDAN S., BORA M. Ö., ÜRGÜN S., ÖZSOY M. İ.
Proceeding Book of 6th International Conference on Scientific and Academic Research ICSAR 2025, Konya, Türkiye, 19 - 20 Mart 2025, sa.1, ss.231-242, (Tam Metin Bildiri)

15. Experimental Investigation of Surface Roughness in 316L Rolled Stainless Steel After Fiber Laser Engraving Using Design of Experiments Approach

ÜRGÜN S., BORA M. Ö., FİDAN S., ÖZSOY M. İ.
PROCEEDING BOOK OF 6TH INTERNATIONAL CONFERENCE ON INNOVATIVE ACADEMIC STUDIES ICIAS 2025, Konya, Türkiye, 12 - 13 Mart 2025, cilt.1, sa.17, ss.127-138, (Tam Metin Bildiri)

16. Curved Surface Fiber Laser Texturing of Ti6Al4V (Grade 5) Titanium Alloy and the Influence of Laser Parameters on Surface Morphology and Roughness Characteristics

FİDAN S., BORA M. Ö., ÜRGÜN S., ÖZSOY M. İ.
PROCEEDING BOOK OF 6TH INTERNATIONAL CONFERENCE ON INNOVATIVE ACADEMIC STUDIES ICIAS 2025, Konya, Türkiye, 12 - 13 Mart 2025, cilt.1, sa.18, ss.139-150, (Tam Metin Bildiri)

17. AA2024-T3 ALÜMİNYUM ALAŞIMININ FİBER LAZER YÜZEY MODİFİKASYONU İLE KATAFOREZ KAPLAMA TUTUNMA PERFORMANSININ DEĞERLENDİRİLMESİ

KOLUKIRIK B., USTA Z., BORA M. Ö., ÜRGÜN S., FİDAN S., CEYLAN R., et al.
9. INTERNATIONAL MARMARA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, İstanbul, Türkiye, 2 - 03 Şubat 2025, ss.116-131, (Tam Metin Bildiri)

18. 1.2379 SOĞUK İŞ TAKIM ÇELİĞİNİN LAZER YÜZEY DOKULAMA YÖNTEMİ VE YÜZEY ÇİZİK TESTİ KULLANILARAK SÜRTÜNME KATSAYISININ İNCELENMESİ

OKCU M., KURT S., BORA M. Ö., FİDAN S., ÜRGÜN S., Ceylan R., et al.
9. INTERNATIONAL MARMARA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, İstanbul, Türkiye, 2 - 03 Şubat 2025, ss.70-83, (Tam Metin Bildiri)

19. AA2024-T3 ALÜMİNYUM ALAŞIMI YÜZEYİNDE FİBER LAZER İŞLEME PARAMETRELERİNİN ETKİSİ VE TAGUCHİ YÖNTEMİ İLE OPTİMİZASYONU

USTA Z., KOLUKIRIK B., BORA M. Ö., FİDAN S., ÜRGÜN S., CEYLAN R., et al.
9. INTERNATIONAL MARMARA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, İstanbul, Türkiye, 2 - 03 Şubat 2025, ss.102-115, (Tam Metin Bildiri)

20. 1.2379 SOĞUK TAKIM ÇELİĞİ FİBER LAZER İŞLEME PARAMETRELERİNİN ETKİSİ VE TAGUCHİ YÖNTEMİ İLE OPTİMİZASYONU

KURT S., OKCU M., BORA M. Ö., FİDAN S., ÜRGÜN S., CEYLAN R., et al.
9. INTERNATIONAL MARMARA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, İstanbul, Türkiye, 2 - 03 Şubat 2025, ss.84-101, (Tam Metin Bildiri)

21. Laser Surface Texturing of AA1050 Aluminum Alloy: Optimization of Geometric Patterns and Laser Parameters for Enhanced Surface Characteristics

Pilavcı Ç., ÜRGÜN S., FİDAN S., BORA M. Ö., ÜRGÜN D.
4th International Symposium on Characterization, Sakarya, Türkiye, 16 - 18 Ekim 2024, (Tam Metin Bildiri) Creative Commons License

22. Effect of Fiber Laser Parameters on Surface Roughness, Line Morphology and Surface Topography of 6061-T6 Aluminum Alloy on Curved Surfaces

FİDAN S., ÜRGÜN S., BORA M. Ö., ÖZSOY M. İ.
2nd International Conference on Trends in Advanced Research (ICTAR), Konya, Türkiye, 22 - 23 Kasım 2024, ss.445-458, (Tam Metin Bildiri) Creative Commons License

23. Effect of Laser Sintering Parameters: Including Hatch Distance and Scanning Angle on Surface Characteristics of 6061-T6 Aluminum Alloy on Curved Surfaces

FİDAN S., ÜRGÜN S., BORA M. Ö., ÖZSOY M. İ.
2nd International Conference on Trends in Advanced Research (ICTAR), Konya, Türkiye, 22 - 23 Kasım 2024, ss.431-444, (Tam Metin Bildiri) Creative Commons License

24. Fiber Laser Peening of Ti6Al4V Alloy Considering the Effects of Laser Power, Scan Speed and Overlap Rate on Surface Morphology and Roughness

Ürgün S., Fidan S., Özsoy M. İ., Bora M. Ö.
6th International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 25 - 26 Eylül 2024, cilt.1, ss.119-129, (Tam Metin Bildiri) Creative Commons License

25. Investigation of the Effects of CO2 Laser Processing Parameters on Kerf Width and Depth in Basalt Fiber Reinforced Epoxy Composites

Ürgün S., Fidan S., Özsoy M. İ., Bora M. Ö.
6th International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 25 - 26 Eylül 2024, cilt.1, ss.272-281, (Tam Metin Bildiri) Creative Commons License

26. Laser Surface Texturing Parameters and Their Influence on Surface Roughness in Basalt Fiber Reinforced Epoxy Composites

Fidan S., Ürgün S., Bora M. Ö., Özsoy M. İ.
3rd International Conference on Scientific and Innovative Studies, Konya, Türkiye, 11 - 12 Eylül 2024, cilt.1, ss.236-245, (Tam Metin Bildiri) Creative Commons License

27. Fiber Laser Induced Texturing Geometric Effects on 316L Stainless Steel: Surface Morphology and Roughness Assessment

Fidan S., Ürgün S., Özsoy M. İ., Bora M. Ö.
3rd International Conference on Scientific and Innovative Studies, Konya, Türkiye, 11 - 12 Eylül 2024, cilt.1, ss.446-458, (Tam Metin Bildiri) Creative Commons License

28. Advanced Smoke Detection Technique in Laser Surface Texturing of Basalt Fiber Reinforced Epoxy Composites

Ürgün S., Fidan S., Bora M. Ö., Özsoy M. İ.
5TH INTERNATIONAL CONFERENCE ON ENGINEERING AND APPLIED NATURAL SCIENCES ICEANS 2024, Konya, Türkiye, 25 - 26 Ağustos 2024, cilt.1, sa.1, ss.864-873, (Tam Metin Bildiri) Creative Commons License

29. ENHANCED SURFACE ANALYSIS OF AVIATION-GRADE 4330 STEEL PROCESSED WITH FIBER LASER: A COMPARATIVE STUDY USING BARKHAUSEN NOISE AND GRAYSCALE IMAGE HISTOGRAM METHODS

Yüşen A., Fidan S., Ürgün S., Bora M. Ö.
2. INTERNATIONAL BLACKSEA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Trabzon, Türkiye, 29 - 30 Haziran 2024, cilt.1, sa.1, ss.349-365, (Tam Metin Bildiri)

30. 35ncd16 Low Alloy Steel Fiber Laser-Induced Burn Damage Analysis With The Barkhausen Noise Method

Yüşen A., Fidan S., Bora M. Ö., Ürgün S.
35ncd16 Low Alloy Steel Fiber Laser-Induced Burn Damage Analysis With The Barkhausen Noise Method, Trabzon, Türkiye, 29 - 30 Haziran 2024, cilt.1, sa.1, ss.334-348, (Tam Metin Bildiri)

31. Removal of Epoxy Primer and Acrylic Paint from the Surface of 2024-T3 Alloys Using Fiber Laser: Effects on Surface Morphology and Roughness

Coşkun Ö., Fidan S., Bora M. Ö., Ürgün S.
2. INTERNATIONAL BLACKSEA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Trabzon, Türkiye, 29 - 30 Haziran 2024, cilt.1, sa.1, ss.515-530, (Tam Metin Bildiri)

32. INVESTIGATION OF THE EFFECT OF CUTTING PARAMETERS ON SURFACE ROUGHNESS IN THE MANUFACTURING OF HARDOX 450 MATERIAL BY MILLING METHOD

Turan Z., Ürgün S., Fidan S., Bora M. Ö.
3rd INTERNATIONAL CONGRESS ON ENGINEERING AND SCIENCES, İstanbul, Türkiye, 10 - 11 Mayıs 2024, cilt.1, sa.1, ss.245-255, (Tam Metin Bildiri)

33. CO2 LAZER İŞLEME PARAMETRELERİNİN 1.2379 SOĞUK İŞ TAKIM ÇELİĞİ YÜZEYLERİ ÜZERİNDEKİ ETKİLERİNİN İNCELENMESİ

Uçakkuş Ö. E., Zeren A., Ürgün S., Fidan S., Bora M. Ö., Ceylan R., et al.
9. INTERNATIONAL SCIENCES AND INNOVATION CONGRESS, Şanlıurfa, Türkiye, 16 - 17 Mart 2024, ss.109-125, (Tam Metin Bildiri)

34. 1.2379 SOĞUK İŞ TAKIM ÇELİĞİNDE TEKRARLI CO2 LAZER HATTI İŞLEMLERİNDEN KAYNAKLANAN YÜZEY MORFOLOJİSİ DEĞİŞİKLİKLERİNİN KARAKTERİZASYONU

Uçakkuş Ö. E., Zeren A., Fidan S., Bora M. Ö., Ürgün S., Ceylan R., et al.
9. INTERNATIONAL SCIENCES AND INNOVATION CONGRESS, Şanlıurfa, Türkiye, 16 - 17 Mart 2024, ss.95-108, (Tam Metin Bildiri)

35. Parameters Optimization for Grooves on Al2O3 Ceramic Surface Using CO2 Laser

Piavcı Ç., Tabak Y., Ürgün S., Canel T.
6th INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES, Antalya, Türkiye, 2 Kasım - 05 Aralık 2023, cilt.1, sa.1, ss.69, (Özet Bildiri)

36. Optimization of Depth and Width Size of Dimple’s Heat Affected Zone Created by CO2 Laser on Polyamide Plate

Canel T., Bağlan İ., Ürgün S.
6th INTERNATIONAL CONFERENCE ON LIFE AND ENGINEERING SCIENCES, Antalya, Türkiye, 2 Kasım - 05 Aralık 2023, cilt.1, sa.1, ss.11, (Özet Bildiri)

37. OPTIMIZATION OF THE CO2 LASER PARAMETERS ON DIMPLE TO OBTAIN THE DESIRED GEOMETRY ON AL2O3 CERAMIC SURFACE

Pilavcı Ç., TABAK Y., ÜRGÜN S., CANEL T.
TURKISH PHYSICAL SOCIETY 39TH INTERNATIONAL PHYSICS CONGRESS, Muğla, Türkiye, 31 Ağustos 2023, cilt.1, ss.205, (Özet Bildiri)

38. Tek ve Tekrarlı Çizilme Testlerinin PMMA (polimetil metakrilat) Yüzey Hasarlarına Etkileri

Çetin A., Fidan S., Sınmazçelik T., Ürgün S.
5. ULUSLARARASI BİLİMSEL ÇALIŞMALAR KONGRESİ, İstanbul, Türkiye, 15 - 17 Mart 2021, ss.366-375, (Tam Metin Bildiri) Creative Commons License

39. ILS-Aletli İniş Sistemi

Ürgün S.
VI. Ulusal Havacılık ve Uzay Konferansı, Kocaeli, Türkiye, 16 Eylül 2016, cilt.1, ss.1206-1215, (Tam Metin Bildiri)

40. A Simple And Efficient Implemantation Of Interleaved Boost Converter

ÇORUH N., ÜRGÜN S., ERFİDAN T., Ozturk S.
6th IEEE Conference on Industrial Electronics and Applications (ICIEA), Beijing, Çin, 21 - 23 Haziran 2011, ss.2364-2368, (Tam Metin Bildiri) Sürdürülebilir Kalkınma identifier identifier

41. Interleaved Boost Converter For Renewable Energy Applications

ÇORUH N., ÜRGÜN S., ERFİDAN T., ÖZTÜRK F. S.
5th International Ege Energy Symposium and Exhibition, Denizli, Türkiye, 27 - 30 Haziran 2010, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

42. Design and Implementation of Flyback Converters

ÇORUH N., ÜRGÜN S., ERFİDAN T.
5th IEEE Conference on Industrial Electronics and Applications, Taichung, Tayvan, 15 - 17 Haziran 2010, ss.24-25, (Tam Metin Bildiri) identifier identifier

43. Flyback Dönüştürücü Tasarımı ve Analizi

ÇORUH N., ERFİDAN T., ÜRGÜN S., ÖZTÜRK F. S.
III. Enerji Verimliliği Ve Kalitesi Sempozyumu(EVK'2009), Kocaeli, Türkiye, 21 - 22 Eylül 2009, ss.297-302, (Tam Metin Bildiri)

44. FLYBACK DÖNÜŞTÜRÜCÜ TASARIMI VE ANALİZİ

Ürgün S.
EMO, Manisa, Türkiye, 01 Mayıs 2009, cilt.1, ss.297-302, (Tam Metin Bildiri)

45. Microcontroller Based Soft-Switched Buck Converter

ERFİDAN T., ÜRGÜN S., ÇORUH N.
4th IEEE Conference on Industrial Electronics and Applications, Xian, Çin, 25 - 27 Mayıs 2009, ss.1372-1374, (Tam Metin Bildiri) identifier identifier

46. DA DA Boost Tipi Dönüştürücü Tasarımı ve Gerçeklenmesi

ÇORUH N., ERFİDAN T., ÜRGÜN S.
Elektrik-Elektronik-Bilgisayar Mühendisliği Sempozyumu (ELECO-2008), Bursa, Türkiye, 26 - 30 Kasım 2008, cilt.1, ss.362-365, (Tam Metin Bildiri)

47. DA DA Buck Tipi Dönüştürücü Tasarımı ve Gerçeklenmesi

ÜRGÜN S., ERFİDAN T., ÇORUH N.
Elektrik-Elektronik-Bilgisayar Mühendisliği Sempozyumu (ELECO-2008), Bursa, Türkiye, 26 - 30 Kasım 2008, cilt.1, ss.358-361, (Tam Metin Bildiri)

48. Implementation of softswitehed frequency unfolder technique for single phase inverter

ÜRGÜN S., ERFİDAN T., ÇAKIR B.
MELECON 2008 - 2008 IEEE Mediterranean Electrotechnical Conference, Ajaccio, Fransa, 5 - 07 Mayıs 2008, ss.625-628, (Tam Metin Bildiri) identifier

49. Implementation of Softswitched Frequency Unfolder Technique for Single Phase Inverter

ÜRGÜN S., ERFİDAN T., ÇAKIR B.
IEEE Mediterranean Electrotechnical Conference, Ajaccio, Fransa, 5 - 07 Mayıs 2008, ss.604-605, (Tam Metin Bildiri) identifier

50. Low Cost Microcontroller Based Implementation of Modulation Techniques for Three-Phase Inverter Applications

ERFİDAN T., ÜRGÜN S., Hekimoglu B.
IEEE Mediterranean Electrotechnical Conference, Ajaccio, Fransa, 5 - 07 Mayıs 2008, ss.520-522, (Tam Metin Bildiri) identifier identifier

51. New software implementation of the space vector modulation

Erfidan T., Urgun S., Karabag Y., Cakir B.
12th IEEE Mediterranean Electrotechnical Conference (MELECON 2004), Dubrovnik, Hırvatistan, 12 - 15 Mayıs 2004, ss.1113-1115, (Tam Metin Bildiri) identifier identifier

52. Artificial neural network based hysteresis current controller for single-phase inverter

Karabag Y., Erfidan T., Urgun S., Abut N.
12th IEEE Mediterranean Electrotechnical Conference (MELECON 2004), Dubrovnik, Hırvatistan, 12 - 15 Mayıs 2004, ss.339-341, (Tam Metin Bildiri) identifier identifier
Kitaplar 4

1. Selective Harmonic Optimization using Whale Optimization Algorithm in Multilevel Inverter and AC-AC Chopper

Ürgün S., Yiğit H.
Handbook of Whale Optimization Algorithm Variants, Hybrids, Improvements, and Applications, Seyedali Mirjalili, Editör, Elsevier Science, Oxford/Amsterdam , Oxford, ss.435-448, 2023

2. Uçaklarda Haberleşme ve Seyrüsefer Sistemleri

Ürgün S.
Nobel Yayınevi, Ankara, 2022

3. Uçak Elektronik Gösterge Sistemleri

Ürgün S.
Palme Yayın Dağıtım, Ankara, 2021 Sürdürülebilir Kalkınma

4. HAVA SAHASI VE HAVA TRAFİK YÖNETİMİ

ÜRGÜN S.
HAVA TAŞIMACILIĞI YÖNETİMİNİN TEMELLERİ, Didem Rodoplu Şahin, Editör, Nobel Akademik Yayıncılık Eğitim Danışmanlık Tic. Ltd. Şti., Ankara, ss.589-614, 2020
Metrikler

Yayın

116

Yayın (WoS)

39

Yayın (Scopus)

46

Atıf (WoS)

276

H-İndeks (WoS)

9

Atıf (Scopus)

362

H-İndeks (Scopus)

10

Atıf (Scholar)

512

H-İndeks (Scholar)

13

Atıf (Sobiad)

28

H-İndeks (Sobiad)

2

Toplam Atıf Sayısı

304

Proje

18

Tez Danışmanlığı

9

Açık Erişim

25
BM Sürdürülebilir Kalkınma Amaçları