Yayınlar & Eserler

Yayın Ağı
Makaleler 57
Tümü (57)
SCI-E, SSCI, AHCI (45)
SCI-E, SSCI, AHCI, ESCI (50)
ESCI (4)
Scopus (49)
TRDizin (6)
Diğer Yayınlar (2)

1. Automatic Determination of the Denavit-Hartenberg Parameters for the Forward Kinematics of All Serial Robots: Novel Kinematics Toolbox

Karhan H. K., Bingül Z.
MACHINES , cilt.13, sa.10, 2025 (SCI-Expanded, Scopus) identifier identifier

2. Adaptive Fractional Hybrid Impedance Control of Rotary Series Elastic Actuator in Flat Terrains

Özdemir M., BİNGÜL Z.
Advanced Intelligent Systems , cilt.7, sa.6, 2025 (SCI-Expanded) identifier identifier

3. Point-to-point virtual model control of a flexible joint robotic manipulator using trajectories of motion

Kizir S., Bingul Z., Agee J. T.
TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL , cilt.47, sa.4, ss.623-633, 2025 (SCI-Expanded) identifier identifier

4. A comparative study of anti-swing radial basis neural-fuzzy LQR controller for multi-degree-of-freedom rotary pendulum systems

Ben Hazem Z., BİNGÜL Z.
Neural Computing and Applications , cilt.35, sa.23, ss.17397-17413, 2023 (SCI-Expanded) identifier identifier

5. Intelligent-PID with PD Feedforward Trajectory Tracking Control of an Autonomous Underwater Vehicle

BİNGÜL Z., Gul K.
Machines , cilt.11, sa.2, 2023 (SCI-Expanded) Creative Commons License identifier identifier

6. A Study of Anti-swing Fuzzy LQR Control of a Double Serial Link Rotary Pendulum

Hazem Z. B., Fotuhi M. J., BİNGÜL Z.
IETE JOURNAL OF RESEARCH , cilt.69, sa.6, ss.3443-3454, 2023 (SCI-Expanded) identifier identifier

7. Comprehensive Review of Different Pendulum Structures in Engineering Applications

Ben Hazem Z., BİNGÜL Z.
IEEE ACCESS , cilt.11, ss.42862-42880, 2023 (SCI-Expanded) Creative Commons License identifier identifier

8. Design and development of a ball-screw and electrical motor driven industrial electromechanical cylinder

Fotuhi M., KARAMAN C., BİNGÜL Z.
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , cilt.40, sa.4, ss.822-830, 2022 (ESCI) identifier identifier

9. Real-time trajectory tracking control of Stewart platform using fractional order fuzzy PID controller optimized by particle swarm algorithm

Bingül Z., Karahan O.
INDUSTRIAL ROBOT-THE INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH AND APPLICATION , cilt.49, sa.4, ss.708-725, 2022 (SCI-Expanded) identifier identifier

10. Anti-swing radial basis neuro-fuzzy linear quadratic regulator control of double link rotary pendulum

Ben Hazem Z., Fotuhi M. J., Bingül Z.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING , cilt.236, sa.3, ss.531-545, 2022 (SCI-Expanded) identifier identifier

11. Fuzzy torque trajectory control of a rotary series elastic actuator with nonlinear friction compensation

Fotuhi M. J., Bingül Z.
ISA Transactions , cilt.115, ss.206-217, 2021 (SCI-Expanded) identifier identifier identifier

12. Novel fractional hybrid impedance control of series elastic muscle-tendon actuator

Fotuhi M. J., Bingül Z.
INDUSTRIAL ROBOT-THE INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH AND APPLICATION , cilt.48, sa.4, ss.532-543, 2021 (SCI-Expanded) identifier identifier

13. COMPARATIVE STUDY OF THE PARALLEL AND ANGULAR ELECTRICAL GRIPPER FOR INDUSTRIAL APPLICATIONS

Fotuhi M. J., BİNGÜL Z.
ACTA MECHANICA ET AUTOMATICA , cilt.15, sa.2, ss.66-73, 2021 (ESCI) identifier identifier

14. Development of a Fuzzy-LQR and Fuzzy-LQG stability control for a double link rotary inverted pendulum

Hazem Z. B., Fotuhi M. J., Bingül Z.
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS , cilt.357, ss.10529-10556, 2020 (SCI-Expanded) Creative Commons License identifier identifier

15. Design, Analysis and Simulation of a 6-DOF Serial Manipulator

Yılmaz Z., Yılmaz O., Bingül Z.
Kocaeli Journal of Science and Engineering , cilt.3, sa.1, ss.1-7, 2020 (Hakemli Dergi)

16. Human postural ankle torque control model during standing posture with a series elastic muscle-tendon actuator

Fotuhi M. J., Yılmaz O., Bingül Z.
SN APPLIED SCIENCES , cilt.2, 2020 (ESCI) Creative Commons License identifier identifier

17. A Comparative Study of the Joint Neuro-Fuzzy Friction Models for a Triple Link Rotary Inverted Pendulum

Ben Hazem Z., Fotuhi M. J., Bingül Z.
IEEE ACCESS , cilt.8, ss.49066-49078, 2020 (SCI-Expanded) identifier identifier

18. Advanced robotics analysis toolbox for kinematic and dynamic design and analysis of high-DOF redundant serial manipulators

Özakyol H., Karaman C., Bingül Z.
COMPUTER APPLICATIONS IN ENGINEERING EDUCATION , cilt.27, sa.6, ss.1429-1452, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

19. Feasibility Study of Friction Stir Welding Applicationfor Kevlar Material

Taşan A., TİRKEŞ S., Öztürk Y., BİNGÜL Z.
International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering , cilt.13, ss.213-230, 2019 (Hakemli Dergi) identifier

20. Comparison of friction estimation models for rotary triple inverted pendulum

Hazem Z. B., Fotuhi M. J., Bingül Z.
International Journal of Mechanical Engineering and Robotics Research , cilt.8, ss.74-78, 2019 (Scopus) Creative Commons License identifier

21. Design and development of a Stewart platform assisted and navigated transsphenoidal surgery

Kizir S., Bingül Z.
TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES , cilt.27, ss.961-972, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

22. A novel performance criterion approach to optimum design of PID controller using cuckoo search algorithm for AVR system

Bingül Z., Karahan O.
Journal of the Franklin Institute , cilt.355, ss.5534-5559, 2018 (SCI-Expanded) identifier identifier

23. Comparison of PID and FOPID controllers tuned by PSO and ABC algorithms for unstable and integrating systems with time delay

Bingül Z., Karahan O.
Optimal Control Applications and Methods , cilt.39, ss.1431-1450, 2018 (SCI-Expanded) identifier identifier

24. Swarm intelligence for controller tuning and control of fractional systems

Bingül Z., Karahan O.
SWARM INTELLIGENCE, VOL 3: APPLICATIONS , cilt.119, ss.245-281, 2018 (SCI-Expanded) identifier

25. Trajectory and Vibration Control of a Single-Link Flexible-Joint Manipulator Using a Distributed Higher-Order Differential Feedback Controller

Agee J. T., Bingül Z., Kizir S.
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME , cilt.139, 2017 (SCI-Expanded) Creative Commons License identifier identifier

26. Recent Advances in Control Theory and Applications in Turkey

BİNGÜL Z.
TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL , cilt.38, sa.5, ss.499-500, 2016 (SCI-Expanded) Creative Commons License identifier identifier

27. Intelligent proportional-integral (iPI) control of a single link flexible joint manipulator

Agee J. T., Kizir S., Bingül Z.
JOURNAL OF VIBRATION AND CONTROL , cilt.21, ss.2273-2288, 2015 (SCI-Expanded) identifier identifier

28. Higher-order differential feedback control of a flexible-joint manipulator

AGEE J. T., BİNGÜL Z., KİZİR S.
JOURNAL OF VIBRATION AND CONTROL , cilt.21, sa.10, ss.1976-1986, 2015 (SCI-Expanded) identifier identifier

29. Tip trajectory control of a flexible-link manipulator using an intelligent proportional integral (iPI) controller

AGEE J. T., BİNGÜL Z., KİZİR S.
TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL , cilt.36, sa.5, ss.673-682, 2014 (SCI-Expanded) identifier identifier

30. Inverse kinematics solutions for industrial robot manipulators with offset wrists

KÜÇÜK S., BİNGÜL Z.
APPLIED MATHEMATICAL MODELLING , cilt.38, ss.1983-1999, 2014 (SCI-Expanded) identifier identifier

31. Fuzzy impedance and force control of a Stewart platform

Kizir S., Bingül Z.
TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES , cilt.22, ss.924-939, 2014 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

32. TIME DELAY COMPENSATED VISION BASED STABILIZATION CONTROL OF AN INVERTED PENDULUM

KİZİR S., OCAK H., BİNGÜL Z., OYSU C.
INTERNATIONAL JOURNAL OF INNOVATIVE COMPUTING INFORMATION AND CONTROL , cilt.8, sa.12, ss.8133-8145, 2012 (SCI-Expanded) identifier identifier

33. Fractional PID controllers tuned by evolutionary algorithms for robot trajectory control

Bingül Z., Karahan O.
TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES , cilt.20, ss.1123-1136, 2012 (SCI-Expanded) identifier identifier

34. Cascade fuzzy logic control of a single-link flexible-joint manipulator

AKYUZ I. H., BİNGÜL Z., KİZİR S.
TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES , cilt.20, sa.5, ss.713-726, 2012 (SCI-Expanded) identifier identifier

35. Dynamic identification of Staubli RX-60 robot using PSO and LS methods

Bingül Z., Karahan O.
EXPERT SYSTEMS WITH APPLICATIONS , cilt.38, ss.4136-4149, 2011 (SCI-Expanded) identifier identifier

36. Development and control of a high precision stewart platform

KİZİR S., BİNGÜL Z., KÜÇÜK S., OYSU C.
SDU International Journal of Technologic Sciences , 2011 (Hakemli Dergi)

37. A Fuzzy Logic Controller tuned with PSO for 2 DOF robot trajectory control

Bingül Z., Karahan O.
EXPERT SYSTEMS WITH APPLICATIONS , cilt.38, ss.1017-1031, 2011 (SCI-Expanded) identifier identifier

38. An Off-Line Robot Simulation Toolbox

Küçük S., Bingül Z.
COMPUTER APPLICATIONS IN ENGINEERING EDUCATION , cilt.18, ss.41-52, 2010 (SCI-Expanded) identifier identifier

39. Fuzzy control of a real time inverted pendulum system

Kizir S., Bingül Z., Oysu C.
JOURNAL OF INTELLIGENT & FUZZY SYSTEMS , cilt.21, ss.121-133, 2010 (SCI-Expanded) identifier identifier

40. Application of heuristic and hybrid-GASA algorithms to tool-path optimization problem for minimizing airtime during machining

Oysu C., Bingül Z.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE , cilt.22, ss.389-396, 2009 (SCI-Expanded) identifier identifier

41. Adaptive genetic algorithms applied to dynamic multiobjective problems

Bingul Z.
APPLIED SOFT COMPUTING , cilt.7, ss.791-799, 2007 (SCI-Expanded) identifier identifier

42. Hybrid genetic algorithm and simulated annealing for two-dimensional non-guillotine rectangular packing problems

Soke A., Bingul Z.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE , cilt.19, ss.557-567, 2006 (SCI-Expanded) identifier identifier

43. Comparative study of performance indices for fundamental robot manipulators

Kucuk S., Bingul Z.
ROBOTICS AND AUTONOMOUS SYSTEMS , cilt.54, sa.7, ss.567-573, 2006 (SCI-Expanded) identifier identifier

44. A real-time prediction model of electrode extension for GMAW

Bingul Z., Cook G.
IEEE-ASME TRANSACTIONS ON MECHATRONICS , cilt.11, ss.47-54, 2006 (SCI-Expanded) identifier identifier

45. Link mass optimization of serial robot manipulators using genetic algorithm

Kucuk S., Bingul Z.
KNOWLEDGE-BASED INTELLIGENT INFORMATION AND ENGINEERING SYSTEMS, PT 1, PROCEEDINGS , cilt.4251, ss.138-144, 2006 (SCI-Expanded) identifier

46. Comparison of stochastic and approximation algorithms for one-dimensional cutting problems

Bingul Z., Oysu C.
ADVANCES IN INTELLIGENT COMPUTING, PT 1, PROCEEDINGS , cilt.3644, ss.976-985, 2005 (SCI-Expanded) identifier

47. Comparison of meta-heuristic hybrid approaches for two dimensional non-guillotine rectangular cutting problems

Soke A., Bingul Z.
ADVANCES IN NATURAL COMPUTATION, PT 3, PROCEEDINGS , cilt.3612, ss.1304-1307, 2005 (SCI-Expanded) identifier

48. A Study of Simulated Annealing Algorithm for Solutions of Two Dimensional Non-Guillotine Cutting Problems

Soke A., BİNGÜL Z.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.8, sa.1, ss.25-36, 2005 (ESCI) identifier

49. A new PID tuning technique using differential evolution for unstable and integrating processes with time delay

Bingul Z.
NEURAL INFORMATION PROCESSING , cilt.3316, ss.254-260, 2004 (SCI-Expanded) identifier identifier

50. Comparison of constant current and pulsed gas metal arc welding processes on basis of electrode resistive dissipation

Bingul Z., Cook G., Strauss A.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING , cilt.8, ss.19-28, 2003 (SCI-Expanded) identifier identifier

51. Instability phenomena in the gas-metal arc welding self-regulation process

Bingul Z.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.216, ss.899-910, 2002 (SCI-Expanded) identifier identifier

52. Dynamic model for electrode melting rate in gas metal are welding process

Bingul Z., Cook G., Strauss A.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING , cilt.6, ss.41-50, 2001 (SCI-Expanded) identifier identifier

53. Application of fuzzy logic to spatial thermal control in fusion welding

Bingul Z., Cook G., Strauss A.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS , cilt.36, ss.1523-1530, 2000 (SCI-Expanded) identifier identifier

54. Evolutionary approach to multi-objective problems using adaptive genetic algorithms

Bingul Z., Sekmen A., Zein-Sabatto S.
Proceedings of the IEEE International Conference on Systems, Man and Cybernetics , cilt.3, ss.1923-1927, 2000 (Scopus) identifier identifier

55. Genetic algorithms applied to real time multiobjective optimization problems

Bingül Z., Sekmen A., Palaniappan S., Zein-Sabatto S.
Conference Proceedings - IEEE SOUTHEASTCON , ss.95-103, 2000 (Scopus) identifier

56. Human-robot interaction over the internet

Sekmen A., Bingül Z., Hombal V., Zein-Sabatto S.
Conference Proceedings - IEEE SOUTHEASTCON , ss.223-228, 2000 (Scopus) identifier

57. Dynamic modeling of GMAW process

Bingul Z., Cook G. E.
Proceedings - IEEE International Conference on Robotics and Automation , cilt.4, ss.3059-3064, 1999 (Scopus) identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 123

1. Adaptive Trajectory Optimization for Humanoid Robots Using Model Predictive Control in Dynamic Environments

Uluşan E., Bingül Z.
IECON 2025 – 51st Annual Conference of the IEEE Industrial Electronics Society, Madrid, İspanya, 14 - 17 Ekim 2025, ss.1-6, (Tam Metin Bildiri)

2. Camera-based Online Torque Estimation of a Multi-link Pendulum via Extended Kalman Filtering

Karhan H. K., Bingül Z.
IECON 2025 – 51st Annual Conference of the IEEE Industrial Electronics Society, Madrid, İspanya, 14 - 17 Ekim 2025, ss.1-6, (Tam Metin Bildiri)

3. Singularity-Free and Collision-Free Optimal Trajectory Planning for Multi Industrial and Collaborative Robots in Common Workspace

Yavaş N. B., Bingul Z.
IECON 2025 – 51st Annual Conference of the IEEE Industrial Electronics Society, Madrid, İspanya, 14 - 17 Ekim 2025, ss.1-6, (Tam Metin Bildiri)

4. Adaptive Market-Based Dynamic Task Allocation Under Environmental Uncertainty

Ozturk H. B., Yavaş N. B., Bingül Z.
15th International Conference on Simulation and Modeling Methodologies, Technologies and Applications, SIMULTECH 2025, Bilbao, İspanya, 11 - 13 Haziran 2025, cilt.1, ss.70-80, (Tam Metin Bildiri) identifier

5. Game Theory Based Decentralized Multi-Task Allocation Algorithm for Multi-Agent Systems

Ozturk H. B., Yavas N. B., Ozturk U., Bingul Z.
2024 International Congress on Human-Computer Interaction, Optimization and Robotic Applications (HORA), İstanbul, Türkiye, 23 - 25 Mayıs 2024, ss.1-9, (Tam Metin Bildiri) identifier

6. Development of Optimal Task Allocation Algorithm for Unmanned Aerial Vehicle Swarms

Ozturk H. B., Ozturk U., Yavas N. B., Bingül Z.
AICCONF '24: Proceedings of the Cognitive Models and Artificial Intelligence Conference, İstanbul, Türkiye, 25 - 26 Mayıs 2024, ss.341-348, (Tam Metin Bildiri) identifier

7. A Comprehensive Comparison of Spatial, Screw, Geometric, and Quaternion Approaches in Snake Robot Kinematics

Nasirov A., Bingül Z.
AICCONF '24: Proceedings of the Cognitive Models and Artificial Intelligence Conference, İstanbul, Türkiye, 25 - 26 Mayıs 2024, ss.224-231, (Tam Metin Bildiri) identifier

8. Comparative Study of Anti-swing Controllers for a Triple Link Rotary Pendulum System

Hazem Z. B., Bingül Z.
2023 IEEE 8th International Conference on Engineering Technologies and Applied Sciences (ICETAS) , Manama, Bahreyn, 25 - 27 Ekim 2023, ss.10-16, (Tam Metin Bildiri)

9. Determining Robot Trajectory Planning Using Image Processing for Wood Painting

Aykut Gülırmak E., Bingül Z.
2023 7th International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT), Ankara, Türkiye, 26 Ekim 2023, (Tam Metin Bildiri) identifier

10. A Study of Stabilization and Swing-up Linear Control for a Single Link Rotary Pendulum

Hazem Z. B., BİNGÜL Z.
2022 International Conference on Theoretical and Applied Computer Science and Engineering, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2022, ss.60-65, (Tam Metin Bildiri) identifier identifier

11. Design and Control of an Unmanned Underwater Vehicle

BİNGÜL Z.
4th International Symposium on Multidisciplinary Studies and Innovative Technologies, ISMSIT 2020, İstanbul, Türkiye, 22 - 24 Ekim 2020, (Tam Metin Bildiri) identifier

12. Human postural control model during standing posture with a Series Elastic muscle-tendon Actuator

Fotuhi M., YILMAZ O., BİNGÜL Z.
5th International Conference on Engineering Sciences, Ankara, Türkiye, 19 Eylül 2019, (Tam Metin Bildiri)

13. Modelling and Torque Control of an Non-Linear Friction Inverted Pendulum driven with a Rotary Series Elastic Actuator

Fotuhi M., Hazem Z. B., Bingül Z.
2019 3rd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT), Ankara, Türkiye, 11 - 13 Ekim 2019, (Tam Metin Bildiri) identifier

14. Force Control of Industrial Electromechanical Cylinder Drivetrain With A Ball-Screw Mechanism

KARAMAN C., Fotuhi M., Karataş M., BİNGÜL Z.
10th International Symposium on Intelligent Manufacturing and Service Systems, Sakarya, Türkiye, 9 - 11 Eylül 2019, (Tam Metin Bildiri)

15. Design and Development of A Lead Screw and Motor Driven Industrial Gripper Mechanism

Fotuhi M., Karataş M., BİNGÜL Z.
10th International Symposium on Intelligent Manufacturing and Service Systems, Sakarya, Türkiye, 9 - 11 Eylül 2019, (Tam Metin Bildiri)

16. Design and Real time Control of 6 DOF Tire Curing Mold Cleaning Robot

orbay l., BİNGÜL Z.
International Conference on Civil Mechanical, Production and Industrial Engineering, İstanbul, Türkiye, 20 - 21 Haziran 2019, (Tam Metin Bildiri)

17. Design and Analysis of a Radial Flux Electrically Excited Eddy Current Brake

Topcuoglu M. B., Bingul Z., Gulec M.
28th IEEE International Symposium on Industrial Electronics, ISIE 2019, Vancouver, Kanada, 12 - 14 Haziran 2019, ss.1498-1505, (Tam Metin Bildiri) identifier identifier

18. Comparison of joint friction estimation models for laboratory 2 DOF double dual twin rotor aero-dynamical system

Fotuhi M. J., Hazem Z. B., Bingül Z.
44th Annual Conference of the IEEE Industrial Electronics Society, IECON 2018, Washington, Amerika Birleşik Devletleri, 20 - 23 Ekim 2018, ss.2231-2236, (Tam Metin Bildiri) identifier identifier

19. Kinematic and dynamic analysis and design toolbox of high-DOF hybrid multibody systems

Özakyol H., Karaman C., Bingül Z.
44th Annual Conference of the IEEE Industrial Electronics Society, IECON 2018, Washington, Amerika Birleşik Devletleri, 20 - 23 Ekim 2018, ss.2558-2563, (Tam Metin Bildiri) identifier identifier

20. New design and development of reconfigurable-hybrid hexapod robot

Ozyalcin K., Akay I. H., Ozturk Y., Mengus B., Özakyol H., Bingül Z.
44th Annual Conference of the IEEE Industrial Electronics Society, IECON 2018, Washington, Amerika Birleşik Devletleri, 20 - 23 Ekim 2018, ss.2583-2588, (Tam Metin Bildiri) identifier identifier

21. Design and Development of a Stewart Platform Based Robotic System for Transsphenoidal Surgery

KİZİR S., BİNGÜL Z.
6th International Conference on Control Engineering Information Technology, 25 - 27 Ekim 2018, (Tam Metin Bildiri)

22. Fractional Order Fuzzy PID Tracking Control of Stewart Platform Using PSO

Karahan O., Bingül Z.
6th International Conference on Control Engineering Information Technology - CEIT 2018, İstanbul, Türkiye, 25 - 27 Ekim 2018, (Tam Metin Bildiri)

23. Adaptive joint friction estimation model for laboratory 2 DOF double dual twin rotor aerodynamical helicopter system

Fotuhi M. J., Ben Hazem Z., Bingül Z.
6th International Conference on Control Engineering and Information Technology, CEIT 2018, İstanbul, Türkiye, 25 - 27 Ekim 2018, (Tam Metin Bildiri) identifier

24. Linear and extended kalman filter estimation of pitch and yaw angles for 2 DOF double dual twin rotor aero-dynamical system

Nasir F. E., Javad Fotuhi M., Bingül Z.
6th International Conference on Control Engineering and Information Technology, CEIT 2018, İstanbul, Türkiye, 25 - 27 Ekim 2018, (Tam Metin Bildiri) identifier

25. A comparative study of the friction models with adaptive coefficients for a rotary triple inverted pendulum

Hazem Z. B., Javad Fotuhi M., Bingül Z.
6th International Conference on Control Engineering and Information Technology, CEIT 2018, İstanbul, Türkiye, 25 - 27 Ekim 2018, (Tam Metin Bildiri) identifier

26. Position and Trajectory Fuzzy Control of a Laboratory 2 DOF Double Dual Twin Rotor Aerodynamical System

Fotuhi M. J., Bingül Z.
27th IEEE International Symposium on Industrial Electronics, ISIE 2018, Cairns, Avustralya, 13 - 15 Haziran 2018, ss.277-282, (Tam Metin Bildiri) identifier

27. Real-time PID Control for Magnetic Levitation System with special Hall Effect sensor

Edison Wveimar A. T., Fotuhi M., BİNGÜL Z.
II. International Conference On Theoretical and Applied Computer Science and Engineering, İstanbul, Türkiye, 29 - 30 Haziran 2018, (Tam Metin Bildiri)

28. Blur Analysis for Gimbaled Imaging Systems in Air Vehicles

Dogan H., Bingül Z.
5th International Conference on Control, Decision and Information Technologies, CoDIT 2018, Thessaloniki, Yunanistan, 10 - 13 Nisan 2018, ss.995-1000, (Tam Metin Bildiri) identifier identifier

29. Comparison of Friction Estimation Models For Rotary Triple Inverted Pendulum

Hazem Z. B., Fotuhi M., BİNGÜL Z.
5th International Conference on Electrical and Electronics Engineering (ICEEE 2018), İstanbul, Türkiye, 3 - 05 Mayıs 2018, (Tam Metin Bildiri)

30. Fuzzy Logic Control for Pitch and Yaw Angles of a Dual Rotor Helicopter

Fotuhi M. J., BİNGÜL Z.
THE 5TH INTERNATIONALFUZZY SYSTEMS SYMPOSIUM, 14 - 15 Ekim 2017, (Özet Bildiri)

31. İki Serbestlik Dereceli Dört Rotor Sisteminin Tasarımı, Modellenmesi ve Kontrolü

KELEKÇİ E., KİZİR S., BİNGÜL Z.
5th International Symposium on Innovative Technologies in Engineering and Science, 29 - 30 Eylül 2017, (Tam Metin Bildiri)

32. Robotics toolbox for kinematic analysis and design of hybrid multibody systems

Özakyol H., Karaman C., Bingül Z.
18th International Conference on Advanced Robotics, ICAR 2017, Hong Kong, Çin, 10 - 12 Temmuz 2017, ss.401-406, (Tam Metin Bildiri) identifier identifier

33. Taklit El ile Konum ve Kuvvet Kontrollü Protez El PrototipÜretilmesi

Kulakaç A. K., Beyazkoç Ö., Bozca Y. Y., Aslan H. S., Bingül Z.
Otomatik Kontrol Ulusal Toplantısı, Eskişehir, Türkiye, 29 Eylül - 01 Ekim 2016, (Tam Metin Bildiri)

34. Üst Ekstremite Dirsek Altı Protezinin Tasarımı veMATLAB Simulink Tabanlı Kinematik ve Dinamik OlarakModellenmesi

Kulakaç A. K., Beyazkoç Ö., Bozca Y. Y., Aslan H. S., Bingül Z.
Otomatik Kontrol Ulusal Toplantısı, Eskişehir, Türkiye, 29 Eylül 2016, ss.334-339, (Tam Metin Bildiri)

35. Yüksek Frekanslı Lazer Darbeleri ile Yüzey Temizleme Lazer Uygulama Kafasının Tasarımı ve Prototipi Üretilerek Paslı Metal Yüzeyin Temizlenmesi

Köse B., Bingül Z., Demir A.
18. Ulusal Optik Elektro-Optik ve Fotonik Çalıştayı, Ankara, Türkiye, 23 Eylül 2016, (Özet Bildiri)

36. Flatness based control of a 2 DOF single link flexible joint manipulator

Markus E., Agee J., Jimoh A., Tlale N., Bingül Z.
2nd International Conference on Simulation and Modeling Methodologies, Technologies and Applications, SIMULTECH 2012, Rome, İtalya, 28 - 31 Temmuz 2012, ss.437-442, (Tam Metin Bildiri) identifier

37. Çift Eksenli Ters Sarkaç Sisteminde Parametrelerin Parçacık Sürü Optimizasyon Tekniğiyle Belirlenmesi

YÜKSEL a., KİZİR S., BİNGÜL Z.
Otomatik Kontrol Türk Milli Komitesi Ulusal Toplantısı, TOK2012, Türkiye, 11 - 13 Ekim 2012, (Tam Metin Bildiri)

38. Stewart Platformunun Konum ve Bulanık Empedans-Kuvvet Kontrolü

KİZİR S., BİNGÜL Z.
Otomatik Kontrol Türk Milli Komitesi Ulusal Toplantısı, TOK2012, Türkiye, 11 - 13 Ekim 2012, (Tam Metin Bildiri)

39. Haptik Kontrollü Stewart Platformu ile Endoskop Konumlama

KİZİR S., BİNGÜL Z.
Otomatik Kontrol Türk Milli Komitesi Ulusal Toplantısı, TOK2012, Türkiye, 11 - 13 Ekim 2012, (Tam Metin Bildiri)

40. Obstacle and optimal heading direction detection algorithm on a mobile robot platform Mobi̇l robot platformu üzeri̇nde engel algilanmasi ve opti̇mal yȯnün beli̇rlenmesi̇

KARAKAYA S., Küçükyildiz G., OCAK H., BİNGÜL Z.
2012 20th Signal Processing and Communications Applications Conference, SIU 2012, Fethiye, Mugla, Türkiye, 18 - 20 Nisan 2012, (Tam Metin Bildiri) identifier

41. Vision based magnetic levitation system Görü tabanli manyeti̇k süspansi̇yon si̇stemi̇

Kizir S., Küçükyildiz G., Ocak H., Bingül Z.
2012 20th Signal Processing and Communications Applications Conference, SIU 2012, Fethiye, Mugla, Türkiye, 18 - 20 Nisan 2012, (Tam Metin Bildiri) identifier

42. Obstacle and Optimal Heading Direction Detection Algorithm on a Mobile Robot Platform

KARAKAYA S., KÜÇÜKYILDIZ G., OCAK H., BİNGÜL Z.
20th International Signal Processing and Communications Applications Conference, Muğla, Türkiye, 18 - 20 Nisan 2012, (Tam Metin Bildiri)

43. PSO BASED FLAT CONTROL OF A SINGLE LINK FLEXIBLE MANIPULATOR

Markus E. D., Agee J. T., Jimoh A. A., Tlale N., Anene E. C., Bingul Z.
5th International Conference on Advanced Computer Theory and Engineering (ICACTE 2012), Cape-Town, Güney Afrika, 18 - 19 Ağustos 2012, ss.739-746, (Tam Metin Bildiri) identifier

44. Inverted Pendulum System: a Laboratory Tool for Control Education

KİZİR S., BİNGÜL Z., OYSU C.
9th International Conference on Electronics Computer and Computation (ICECCO 2012), Ankara, Türkiye, 1 - 03 Kasım 2012, ss.61-64, (Tam Metin Bildiri) identifier

45. Ters Sarkaç Sisteminin Görme Tabanlı Gecikme Telafili Kontrolü

KİZİR S., OCAK H., BİNGÜL Z., OYSU C.
TOK 2011, Otomatik Kontrol Ulusal Toplantısı, Türkiye, 14 - 16 Eylül 2011, (Tam Metin Bildiri)

46. PID and state feedback control of a single-link flexible joint robot manipulator

Akyüz İ. H., Ertunç H. M., Bingül Z.
2011 IEEE International Conference on Mechatronics, ICM 2011, İstanbul, Türkiye, 13 - 15 Nisan 2011, ss.409-414, (Tam Metin Bildiri) identifier

47. Tuning of fractional PID controllers using PSO algorithm for robot trajectory control

Bingül Z., Karahan O.
2011 IEEE International Conference on Mechatronics, ICM 2011, İstanbul, Türkiye, 13 - 15 Nisan 2011, ss.955-960, (Tam Metin Bildiri) identifier

48. PID and State Feedback Control of a Single-Link Flexible Joint Robot Manipulator

Akyüz İ. H., Yolaçan E., Bingül Z., Ertunç H. M.
IEEE International Conference on Mechatronics, İstanbul, Türkiye, 13 Nisan 2011, ss.409-414, (Tam Metin Bildiri)

49. Fuzzy Logic Control of Single-Link Flexible Joint Manipulator

AKYUZ I. H., KİZİR S., BİNGÜL Z.
IEEE International Conference on Industrial Technology (ICIT), Alabama, Amerika Birleşik Devletleri, 14 - 16 Mart 2011, (Tam Metin Bildiri) identifier identifier

50. Yüksek Hassasiyetli Stewart Platformunun Kesir Dereceli PID Yöntemiyle Konum Kontrolü ve Yörünge Takibi

Karahan O., Kizir S., Bingül Z.
TOK2010, İstanbul, Türkiye, 21 - 23 Eylül 2010, (Tam Metin Bildiri)

51. Yüksek Hassasiyetli Stewart Platformunun Kayma Kipli Konum Kontrolü ve Yörünge Takibi

KİZİR S., BİNGÜL Z.
TOK2010, Türkiye, 21 - 23 Eylül 2010, (Tam Metin Bildiri)

52. Tek Eklemli Esnek Bağlı Robot Kolunun Modellenmesi, Tasarımı ve Bulanık Mantık ile Kontrolü

Akyüz İ. H., Kizir S., Bingül Z.
GYTE, Kocaeli, Türkiye, 12 Eylül 2010, (Tam Metin Bildiri)

53. 3D Finite Element Analysis and Experimental Verification of A Magnetic Levitation System

Aydın M., Bingül Z.
11th International Workshop on Research and Education in Mechatronics, Ostrava, Çek Cumhuriyeti, 16 Haziran 2010, ss.191-194, (Tam Metin Bildiri)

54. PD-fuzzy controller tuned with PSO for robot trajectory control

Karahan O., Bingül Z.
2nd IFAC International Conference on Intelligent Control Systems and Signal Processing, İstanbul, Türkiye, 21 - 23 Eylül 2009, cilt.2, (Tam Metin Bildiri) Creative Commons License identifier

55. Tek Eklemli Esnek Robot Kolunun Modellenmesi, Tasarımı ve Bulanık Mantık ile Kontrolü

KİZİR S., BİNGÜL Z., AKYUZ İ. H.
TOK09, Türkiye, 13 - 16 Ekim 2009, (Tam Metin Bildiri)

56. Stewart Platformunun Parçacık Sürü Optimizasyonlu Bulanık Mantık Kontrolü

Karahan O., Bingül Z.
TOK 2009, İstanbul, Türkiye, 10 Eylül 2009, (Tam Metin Bildiri)

57. XYZ Kartezyen Robot ve 2B CAD-CAM Çizici Yazılımı Tasarımı

Balta C., Oysu C., Bingül Z., Öztürk S.
TOK 2009, İstanbul, Türkiye, 10 Eylül 2009, (Tam Metin Bildiri)

58. Yüksek Hassasiyetli Stewart Platformunun Tasarımı ve PID ile Kontrolü

KİZİR S., BİNGÜL Z., OYSU C., KÜÇÜK S.
TOK2009, Türkiye, 01 Eylül 2009, (Tam Metin Bildiri)

59. Development and Control of a High Precision Stewart Platform

Kizir S., Bingül Z., Oysu C., Küçük S.
IJRCS09 - 2th International Joint Robotics Competition and Symposium, Isparta, Türkiye, 01 Mayıs 2009, (Tam Metin Bildiri)

60. STAUBLI RX-60 Robot İleri Kinematiğinin Yapay Sinir Ağları Kullanılarak Modellenmesi

Karahan O., Bingül Z.
TOK 2008, İstanbul, Türkiye, 12 Eylül 2008, (Tam Metin Bildiri)

61. SWING-UP AND STABILIZATION OF THE INVERTED PENDULUM PROBLEM WITH PID AND FULL STATE FEEDBACK CONTROL METHODS

KİZİR S., BİNGÜL Z., OYSU C.
9th International Workshop on Research and Education in Mechatronics 2008, 01 Eylül 2008, (Tam Metin Bildiri)

62. Ters Sarkaç Sisteminde Yükseltme Problemi

KİZİR S., BİNGÜL Z., OYSU C.
TOK2008, Türkiye, 01 Eylül 2008, (Tam Metin Bildiri)

63. DESIGN AND IMPLEMENTATION OF A SINGLE AXIS MAGNETIC LEVITATION SYSTEM

KİZİR S., BİNGÜL Z., OYSU C.
9th International Workshop on Research and Education in Mechatronics, 01 Eylül 2008, (Tam Metin Bildiri)

64. Gerçek Zamanlı Ters Sarkaç Sisteminin Bulanık Mantık ile Kontrolü

KİZİR S., BİNGÜL Z., OYSU C.
TOK 2008, Türkiye, 01 Eylül 2008, (Tam Metin Bildiri)

65. Modelling and Identification of STAUBLI RX-60 Robot

KARAHAN O., Binguel Z.
IEEE Conference on Robotics, Automation and Mechatronics, Chengdu, Çin, 21 - 24 Eylül 2008, ss.184-189, (Tam Metin Bildiri) identifier identifier

66. Fuzzy control of a real time inverted pendulum system

KİZİR S., BİNGÜL Z., OYSU C.
12th International Conference on Knowledge-Based Intelligent Information and Engineering Systems, Zagreb, Hırvatistan, 3 - 05 Eylül 2008, cilt.5177, ss.674-681, (Tam Metin Bildiri) identifier identifier

67. Gezgin Robot Tasarımı ve Hareket Planlaması

Kızılhan A., Toz M., Aliustaoğlu C., Bingül Z.
TOK 2007, İstanbul, Türkiye, 10 Eylül 2007, (Tam Metin Bildiri)

68. STAUBLI RX-60 Robotu'nun Parametre Kestirimi

Karahan O., Bingül Z.
TOK 2007, İstanbul, Türkiye, 10 Eylül 2007, (Tam Metin Bildiri)

69. Ters Sarkaç Probleminin PID ve Tam Durum Geri-Besleme Yöntemleri ile Kontrolü

KİZİR S., BİNGÜL Z., OYSU C.
TOK 2007, Türkiye, 01 Eylül 2007, (Tam Metin Bildiri)

70. Manyetik Süspansiyon Sisteminin Gerçeklenmesi ve Kontrolü

ÖZTÜRK s., KİZİR S., BİNGÜL Z., OYSU C.
TOK 2007, Türkiye, 01 Eylül 2007, (Tam Metin Bildiri)

71. Tool Path Optimization Using Genetic Algorithms

OYSU C., BİNGÜL Z.
International Conference on Genetic and Evolutionary Methods, Las Vegas, Amerika Birleşik Devletleri, 25 - 28 Haziran 2007, (Tam Metin Bildiri)

72. Applications of Discrete PSO Algorithm to Two-Dimensional Non-Guillotine Rectangular Packing Problems

Söke A., Bingül Z.
2007 International Conference on Genetic and Evolutionary Methods, Nevada, Amerika Birleşik Devletleri, 25 Haziran 2007, (Tam Metin Bildiri)

73. Tool Path Optimization Using Genetic Algotithm

Oysu C., Bingül Z.
The 2007 International Conference on Genetic and Evolutionary Methods (GEM'07), , Nevada, Amerika Birleşik Devletleri, 25 Haziran 2007, (Tam Metin Bildiri)

74. Comparison of Inverse Kinematics Solutions Using Neural Network for 6R Robot Manipulator with Offset

Bingül Z., Ertunç H. M., Oysu C.
5th International Symposium on Intelligent Manufacturing Systems, Sakarya, Türkiye, 29 - 31 Mayıs 2006, (Tam Metin Bildiri) identifier identifier

75. Link mass optimization of serial robot manipulators using genetic algorithm

Küçük S., Bingül Z.
10th International Conference on Knowledge-Based Intelligent Information and Engineering Systems, KES 2006, Bournemouth, Birleşik Krallık, 9 - 11 Ekim 2006, ss.138-144, (Tam Metin Bildiri) identifier

76. Comparison of stochastic and approximation algorithms for one-dimensional cutting problems

Bingül Z., Oysu C.
International Conference on Intelligent Computing, ICIC 2005, Hefei, Çin, 23 - 26 Ağustos 2005, cilt.3644, ss.976-985, (Tam Metin Bildiri) identifier

77. Comparison of meta-heuristic hybrid approaches for two dimensional non-guillotine rectangular cutting problems

Soke A., Bingül Z.
First International Conference on Natural Computation, ICNC 2005, Changsha, Çin, 27 - 29 Ağustos 2005, cilt.3612, ss.1304-1307, (Tam Metin Bildiri) identifier

78. An Off-line Simulation Package for Robotics Education and Industrial Purposes

Küçük S., Bingül Z.
11th IEEE International Conference on Methods and Models in Automation and Robotics, Katowice, Polonya, 28 Ağustos 2005, (Tam Metin Bildiri)

79. Robot Workspace Optimization Based on a Novel Local and Global Performance Indices

Küçük S., Bingül Z.
IEEE International Symposium on Industrial Electronics, Dubrovnik, Hırvatistan, 20 - 23 Haziran 2005, ss.1593-1598, (Tam Metin Bildiri) identifier

80. An Application of Genetic Algorithms for Multiple Car Group Control in Elevator Systems

Polat B., Söke A., Bingül Z., İmrak C. E.
International Symposium on Innovations in Intelligent Systems and Applications (INISTA), İstanbul, Türkiye, 15 Haziran 2005, (Tam Metin Bildiri)

81. The Inverse Kinematics Solutions of Fundamental Robot Manipulators with Offset Wrist

Küçük S., Bingül Z.
IEEE ICM/HIMA, Taipei, Tayvan, 10 - 12 Haziran 2005, ss.197-202, (Tam Metin Bildiri) identifier

82. Applying Neural Network to Inverse Kinematic Problem for 6R Robot Manipulator with Offset Wrist

Bingül Z., Ertunç H. M., Oysu C.
7th International Conference on Adaptive and Natural Computing Algorithms, Coimbra, Portekiz, 21 - 23 Mart 2005, ss.112-115, (Tam Metin Bildiri) identifier

83. The inverse kinematics solutions of fundamental robot manipulators with offset wrist

Kucuk S., Bingul Z.
IEEE International Conference on Mechatronics (ICM), Taipei, Tayvan, 10 - 12 Temmuz 2005, ss.197-202, (Tam Metin Bildiri) identifier identifier

84. Robot workspace optimization based on a novel local and global performance indices

Kucuk S., Bingul Z.
IEEE International Symposium on Industrial Electronics, Dubrovnik, Hırvatistan, 20 - 23 Haziran 2005, ss.1593-1598, (Tam Metin Bildiri) identifier identifier

85. A New PID Tuning Technique Using Differential Evolution for Unstable and Integrating Processes with Time Delay

Bingül Z.
11th International Conference on Neural Information Processing, Kolkata, Hindistan, 22 Kasım 2004, (Tam Metin Bildiri)

86. A Versitale Mechatronics Systems Education Set Based on Microcontrollers

Çeliktepe A., Oysu C., Ertunç H. M., Bingül Z., Yılmaz M.
5th International Workshop on Research and Education in Mechatronics, Kielce, Polonya, 02 Kasım 2004, (Tam Metin Bildiri)

87. Workspace Optimization of Fundamental Robot Manipulators

Küçük S., Bingül Z.
12th Mediterranean Conference on Control and Automation, Aydın, Türkiye, 06 Haziran 2004, (Tam Metin Bildiri)

88. The Inverse Kinematics Solutions of Industrial Robot Manipulators

Bingül Z., Küçük S.
IEEE Conference on Mechatronics, İstanbul, Türkiye, 3 - 05 Haziran 2004, ss.274-279, (Tam Metin Bildiri) identifier

89. Genetic algorithm and simulated annealing applied to two dimensional non-guillotine rectangular cutting problems

Soke A., Bingul Z.
8th IASTED International Conference on Artificial Intelligence and Soft Computing, Marbella, İspanya, 1 - 03 Eylül 2004, ss.404-409, (Tam Metin Bildiri) identifier identifier

90. The inverse kinematics solutions of industrial robot manipulators

Küçük S., Bingul Z.
IEEE International Conference on Mechatronics (ICM 2004), İstanbul, Türkiye, 3 - 05 Haziran 2004, ss.274-279, (Tam Metin Bildiri) identifier identifier

91. A new PID tuning technique using ant algorithm

Varol H., Bingul Z.
American Control Conference, Massachusetts, Amerika Birleşik Devletleri, 30 Haziran - 02 Temmuz 2004, ss.2154-2159, (Tam Metin Bildiri) identifier identifier

92. Genetik Algoritmaların Farklı Çaprazlama Teknikleriyle İki Boyutlu Kesme Problemlerine Uygulanışı

Söke A., Bingül Z.
3rd International Advanced Technologies Symposium, Ankara, Türkiye, 18 Ağustos 2003, (Tam Metin Bildiri)

93. Robot Sistemlerinde Kinematik Modellerin Karşılaştırılması

Küçük S., Bingül Z.
3rd International Advanced Technologies Symposium, Ankara, Türkiye, 18 Ağustos 2003, (Tam Metin Bildiri)

94. İki Boyutlu Kesme Problemlerinin Genetik Algoritma Yardımıyla Çözümünün İncelenmesi

Söke A., Bingül Z.
XII. International Twelfth Turkish Symposium on Artifical Intelligence and Neural Networks, Çanakkale, Türkiye, 02 Temmuz 2003, (Tam Metin Bildiri)

95. Robot workspace optimization based on the global conditioning index

Küçük S., Bingül Z.
3rd IFAC Workshop on Automatic Systems for Building the Infrastructure in Developing Countries, DECOM-TT 2003, İstanbul, Türkiye, 26 - 28 Haziran 2003, cilt.36, ss.117-122, (Tam Metin Bildiri) identifier

96. Study of droplet transfer mechanism in GMAW

Bingul Z., Cook G., Koseeyaporn P., Strauss A.
6th International Conference on Trends in Welding Research, Arizona, Amerika Birleşik Devletleri, 15 - 19 Nisan 2002, ss.375-379, (Tam Metin Bildiri) identifier identifier

97. Windows-based Robot Simulation Tools

BİNGÜL Z., Koseeyaporn P., Cook G. E.
Proceedings of the 7th International Conference on Control, Automation, Robotics and Vision, ICARC 2002, Singapore, Singapur, 2 - 05 Aralık 2002, ss.1037-1041, (Tam Metin Bildiri) identifier

98. Değişken Yapı Tekniğini Temel Alan Bulanık Mantık Kontrolunun İncelenmesi

Bingül Z.
TOK’2002, Ankara, Türkiye, 09 Eylül 2002, (Tam Metin Bildiri)

99. Kayma Modu Bulanık Mantık Kontrolü Kullanarak Robot Kolu Kontrolünün İncelenmesi

Bingül Z., Sekmen A. S.
IEEE SIU’ 2002, Denizli, Türkiye, 12 Haziran 2002, (Tam Metin Bildiri)

100. Metal Gazalti Kaynağında Elektrod Tel Direnci Matematik Modeli

Bingül Z.
Kaynak Teknoloji III. Ulusal Kongresi, İstanbul, Türkiye, 19 Ekim 2001, (Tam Metin Bildiri)

101. Metal Damla Transferini ve Elektrod Telinin Dinamiğini Gözlemlemek İçin Geliştirilen İki Tekniğin Karşılaştırılması

Bingül Z.
Kaynak Teknoloji III. Ulusal Kongresi, İstanbul, Türkiye, 19 Ekim 2001, (Tam Metin Bildiri)

102. Gaz Altı Kaynağında Tel Elektrod Üzerindeki Isı Transferi ve Sıcaklık Dağılımı

Bingül Z., Küçük S.
Kaynak Teknoloji III. Ulusal Kongresi, İstanbul, Türkiye, 19 Ekim 2001, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

103. Hareketli Robot Kontrolünde Mesafe ve Mekân Önbilgisinin Önemi

Sekmen A. S., Bingül Z., Koku A. B.
IEEE SIU’ 2001, Gazimagusa, Kıbrıs (Kktc), 25 Nisan 2001, (Tam Metin Bildiri)

104. İnternet Bilgi Filtreleme Dili Geliştirimi ve Uygulamaları

Koku A. B., Sekmen A. S., Bingül Z.
IEEE SIU’ 2001, Gazimagusa, Kıbrıs (Kktc), 25 Nisan 2001, (Tam Metin Bildiri)

105. Mikrofon, Kızılötesi Duyucu ve Kamera Birleşimiyle İnsan-Robot Etkileşimi

Sekmen A. S., Bingül Z., Koku A. B.
IEEE SIU’ 2001, Gazimagusa, Kıbrıs (Kktc), 25 Nisan 2001, (Tam Metin Bildiri)

106. Adaptive Genetic Algorithms Applied to Dynamic Multiobjective Problems

Bingül Z., Sekmen A. S., Zeın-Sabatto S.
ANNIE 2000, Missouri, Amerika Birleşik Devletleri, 05 Kasım 2000, (Tam Metin Bildiri)

107. Tam Aktif İnsan-Robot Etkileşiminin Hareketli Robot Üzerinde Uygulanması

Sekmen A. S., Bingül Z.
TOK 2000, Ankara, Türkiye, 21 Eylül 2000, (Tam Metin Bildiri)

108. Real-Time Prediction of Electrode Extension in GMAW

Bingül Z., Cook G. E., Kooseeyaporn P., Strauss M. A.
7th Mechatronics Forum International Conference, Georgia, Amerika Birleşik Devletleri, 06 Eylül 2000, (Tam Metin Bildiri)

109. İnternet Üzerinden Robot-Kullanıcı Etkileşimi

Sekmen A. S., Bingül Z.
IEEE SIU’ 2000, Antalya, Türkiye, 12 Haziran 2000, (Tam Metin Bildiri)

110. Ayarlanabilir Edilgen Kızılötesi Sezici Düzeneği Kullanılarak Otomatik Kamera Kontrolü

Sekmen A. S., Bingül Z.
IEEE SIU’ 2000, Antalya, Türkiye, 12 Haziran 2000, (Tam Metin Bildiri)

111. Ses Kaynağının Yerinin Kestirimi Aracılığıyla Otomatik Kamera Kontrolü

Sekmen A. S., Bingül Z.
IEEE SIU’ 2000, Antalya, Türkiye, 12 Haziran 2000, (Tam Metin Bildiri)

112. Gerçek Zamanda Bulanık Mantık Kullanılarak Uyarlanan Genetik Algoritmaların Çok Amaçlı Eniyileme Sorunlarına Uygulanması

Bingül Z., Sekmen A. S.
IEEE SIU’ 2000, Antalya, Türkiye, 12 - 14 Haziran 2000, (Tam Metin Bildiri)

113. Human-robot Interaction over the Internet

Sekmen A. S., Bingül Z., Hombal V., Zein-Sabatto S.
IEEE SoutheastCon 2000 Conference, Tennessee, Amerika Birleşik Devletleri, 20 Nisan 2000, (Tam Metin Bildiri)

114. Genetic Algorithms Applied to Real Time Multi-objective Optimization Problems

Bingül Z., Sekmen A. S., Zein-Sabatto S.
IEEE SoutheastCon 2000 Conference, Tennessee, Amerika Birleşik Devletleri, 20 Nisan 2000, (Tam Metin Bildiri)

115. Evolutionary approach to multi-objective problems using adaptive genetic algorithms

Bingul Z., Sekmen A., Zein-Sabatto S.
IEEE International Conference on Systems, Man and Cybernetics, Tennessee, Amerika Birleşik Devletleri, 8 - 11 Ekim 2000, ss.1923-1927, (Tam Metin Bildiri) identifier

116. Application of fuzzy logic to spatial thermal control is fusion welding

Bingul Z., Cook G. E., Strauss A. M., Rashid K.
Proceedings of the 1999 IEEE Industry Applications Conference - 34th IAS Annual Meeting, Phoenix, AZ, USA, 3 - 07 Ekim 1999, cilt.1, ss.627-634, (Tam Metin Bildiri) identifier

117. An Application of Multi-Dimensional Optimization Problems Using Genetic Algorithms

Bingül Z., Sekmen A. S., Zein-Sabatto S.
Proceedings of the IASTED International Conference Intelligent Systems and Control (ISC'99), California, Amerika Birleşik Devletleri, 28 Ekim 1999, (Tam Metin Bildiri)

118. Towards Consumer Tele-Presence Methodology

Sekmen A. S., Bingül Z., Hombal V., Zein-Sabatto S.
Proceedings of the IASTED International Conference Robotics and Applications (RA'99),, California, Amerika Birleşik Devletleri, 26 Ekim 1999, (Tam Metin Bildiri)

119. Dynamic Modeling of Electrode Melting Rate in the GMAW Process

Bingül Z., Cook G. E., Alvin S. M.
9th International Conference on Computer Technology in Welding, Michigan, Amerika Birleşik Devletleri, 28 Eylül 1999, (Tam Metin Bildiri)

120. Comparison of algorithms for detection of the number of signal sources

Sekmen A., Bingul Z.
IEEE Southeastcon 99 Conference on Technology on the Brink of 2000, Kentucky, Amerika Birleşik Devletleri, 25 - 28 Mart 1999, ss.70-73, (Tam Metin Bildiri) identifier identifier

121. Dynamic modeling of GMAW process

Bingul Z., Cook G.
International Conference on Robotics and Automation (ICRA '99), Michigan, Amerika Birleşik Devletleri, 10 - 15 Mayıs 1999, ss.3059-3064, (Tam Metin Bildiri) identifier

122. An Investigation of Constant Potential GMAW Instability Behavior

Bingul Z., Cook G., Barnett R., Strauss A., Wells B.
Trends in Welding Research: Proceedings of the 5th International Conference, Pine Mountain, GA, Amerika Birleşik Devletleri, 1 - 05 Haziran 1998, ss.289-294, (Tam Metin Bildiri) identifier

123. Seam Tracking Control by Fuzzy Logic in Pulsed Gas Metal Arc Welding

Rashid K., Bingul Z., Cook G., Hartman D., Damrongsak D.
Trends in Welding Research: Proceedings of the 5th International Conference, Pine Mountain, GA, Amerika Birleşik Devletleri, 1 - 05 Haziran 1998, ss.1073-1077, (Tam Metin Bildiri) identifier
Kitaplar 12

1. Swarm intelligence for controller tuning and control of fractional systems

Bingül Z., Karahan O.
Swarm Intelligence - Volume 3: Applications, Ying Tan, Editör, The Institution of Engineering and Technology, London, ss.245-281, 2018

2. Robot Dinamiği ve Kontrolü

Bingül Z., Küçük S.
Umuttepe Yayınları, Kocaeli, 2017

3. Robot Kinematiği

Bingül Z., Küçük S.
Umuttepe Yayınları, Kocaeli, 2015

4. Dynamic Modeling and Simulation of Stewart Platform

Bingül Z., Karahan O.
Serial and Parallel Robot Manipulators: Kinematic Dynamics, Control and Optimization, Serdar Küçük, Editör, INTECH Open, Rijeka, ss.19-41, 2012

5. Position Control and Trajectory Tracking of the Stewart Platform

KİZİR S., BİNGÜL Z.
Serial and Parallel Robot Manipulators Kinematics Dynamics Control and Optimization, Küçük Serdar, Editör, InTech, 2012

6. Robot Dinamiği ve Kontrolü

Bingül Z., Küçük S.
Birsen Yayınevi, İstanbul, 2008

7. Link Mass Optimization Using Genetic Algorithms for Industrial Robot Manipulators

Bingül Z., Küçük S.
Robot Manipulators , Marco Ceccarelli, Editör, IntechOpen, Rijeka, ss.275-290, 2008

8. Link Mass Optimization Using Genetic Algorithms for Industrial Robot Manipulators

KÜÇÜK S., BİNGÜL Z.
Robot Manipulators, Marco Ceccarelli, Editör, Intech, ss.275-290, 2008

9. Matlab ve Simulinkle Modelleme ve Kontrol II

Bingül Z.
Birsen Yayınevi, İstanbul, 2006

10. Robot Tekniği I

Bingül Z., Küçük S.
Birsen Yayınevi, İstanbul, 2006

11. Robot Kinematics: Forward and Inverse Kinematics

Bingül Z., Küçük S.
Industrial Robotics: Theory, Modelling and Control, Sam Cubero, Editör, IntechOpen, Rijeka, ss.117-148, 2006

12. Matlab ve Simulink le Modelleme ve Kontrol I

Bingül Z.
Birsen Yayınevi, İstanbul, 2005
Ansiklopedide Bölümler 1

1. Türkiye Bilişim Ansiklopedisi

Bingül Z.
Papatya Yayıncılık, ss.273-277, 2006
Metrikler

Yayın

193

Yayın (WoS)

73

Yayın (Scopus)

95

Atıf (WoS)

1698

H-İndeks (WoS)

25

Atıf (Scopus)

2707

H-İndeks (Scopus)

30

Atıf (Scholar)

4613

H-İndeks (Scholar)

35

Atıf (TrDizin)

1

H-İndeks (TrDizin)

1

Atıf (Sobiad)

2

H-İndeks (Sobiad)

1

Proje

19

Tez Danışmanlığı

22

Açık Erişim

6
BM Sürdürülebilir Kalkınma Amaçları